New 3D Workstation - 4600$ budget

#8

I’m with Mash.

128GB 840pro = waste of money.
840Pro are amazing drives in the 256 and 512, in the 128 OCZ beats them on performance and value. Regardless, if you want to use it as a buffer for some large comp files or playback, or even just for peace of mind and not constantly struggling for space, I’d sooner buy a 256 non pro 840 than a pro 128.

1TB raptor is a waste of money when you can buy 3 old red disks and get a better read (slower write though) with raid5 and extremely high safety (compared to a single raptor), or a couple middle end drives and stripe them (if you’re willing to take the risk) for better across the board performance and a ton more space.

For the ram vengeance tends to be overpriced and annoyingly tall. Ivy and Haswell also seem to like 1866 best.
I’d sooner go with the cheaper 1866 G.Skill (Ares is excellent value for money and low profile) than with old Corsair.

Quadro for what you list, especially if you ever use max in dx mode, another waste of money, and the k4k is aging quickly, not to mention has an appallingly small number of units on board for the price.

#9

What apps are worth of Quadro?
I remember old days with MAX 9 and Quadro 1500 it was amazing difference beetween GTO7900 and Quadro 1500, for theQ.
Nowadays there is no more MAXtreme driver, and it seems GTX= Quadro for 3DS MAX?

#10

@ThE_JacO and imashination

Thanks for your feedback too.

Alright, it looks like I have to start at the beginning with the setup of the workstation :wink:

Rhino5 is an OpenGL app, where the main power is used to draw the viewports and shade these while modeling.

Keyshot is all about the processor power and almost no GPU power at all (at least that’s what Keyshot says)

Points taken on the RAM, smallish SSD and HDD. I will research these components again once I have a clear view on the processor and GPU.

So in order to do so and regarding Rhino5/Keyshot, what processor (i7 or xeon?) would you guys suggest and what GPU, so the PC gets the best of both worlds?

#11

I see no reason in the world to go for a single CPU xeon for a CGI DCC workstation. Get an i7/i7k.

I haven’t heard of Rhino having issues with GTX cards in years, nor it using DP, the only severely crippled part of (non titan) gtx vs quadro.

Get a 770 or a 780 if you can afford it, or step down to a 670 or a 680 if you can’t.

There’s no need to find every possible stretch of upgrade imaginable to deplete your budget IMO, unless it’s something at work and saving on a budget will introduce a cut of the same the following year (in which case go splash out on a Titan, or a Quadro K6000, but don’t buy older quadros).

#12

I’d wait a couple months for the new Xeons to come out and see what the landscape looks like then. There will be 12-core single CPU Xeons that will greatly outperform an overclocked 3930K.

#13

That’s not strictly true, not across the board, not when you have a budget.

The 12 core ones (2695 and 2697 v2) will most likely be clocked at 2.4 and 2.7, and are expected to retail off tray for 3.5 to 4.5 grands EACH. They are also targeted to be low TDP (farm scenario)

They are likely to do great at rendering if you’re in a hurry AND on an unlimited budget, AND happen to be working on something that has medium to low low threading bottlenecks, but they will be HORRIBLE cycle per dollar and poor single threaders, so if you plan on a workstation to do work on they are very far from ideal, or even what I’d consider good. They are just not meant for what we do.

The ones that might be of interest on a workstation will have 8-10 cores (E5-2643 and 87W v2), but be ready to pay over a grand each (tray, hard to tell what it will be like once it trickles to the individual) for a locked CPU with TDPs of 130 to 150W, and wait until mid September at least (which you do mention :slight_smile: ).

For someone starting their own thing and with a budget of less than 5k to be a one man band it’d be a grand waste of money, a more capable single CPU box and a secondary mini server/renderbox would be much better for the same investment.

#14

alright, having looked at your feedback and some other rigs, here the new setup:

Processor
Intel Core i7-3930K

Mainboard
ASUS P9X79 PRO

RAM
32GB-Kit G.Skill RipJawsZ PC3-19200U CL10-12-12-31

GPU
EVGA GeForce GTX 780 Superclocked w/ACX, 3GB DDR5, PCI-Express

HDD
Seagate Barracuda 7200 3000GB, SATA 6Gb/s

SSD I
Samsung SSD 840 Pro 256GB SATA 6Gb/s

SSD II
OCZ Vector 256GB

Cooler
Thermalright HR-02 Macho Rev.A (BW)

DVD
LG GH24NS

OS
Win7 Pro

PSU
Super-Flower SF600P14XE Golden Green 80plus gold

Case
Corsair Obsidian Series 650D, ATX

is this going in the right direction now?
at a total of US $3700.- or 2799.- EUR… so almost 1k to spend on a nice aeron chair :slight_smile:

#15

It’ll be fine.
For SSD buy the 840Pro, best drive in the price range. OCZ over 840 only holds for 128.

For Ram honestly I’d buy Ares and save the difference, there’s very, very little difference even in OCing results between ripjaws and ares, RAM for intel is simply NOT the bottleneck or even an enabler anymore.
It’s only gonna be a few bucks, but why waste money? Honestly, the difference is literally none. You’d be hard pressed to find a very artificial, e-peen stroking one if you had a benchmark fetish for ramtest alone :slight_smile:

Unless it’s easier to find ripjaws or the same exact price, in which case, sure, go for it, just don’t think it’ll make any difference over even an unbranded 1866C10 :slight_smile:

#16

Looking good, I’ve never heard of that PSU unit though, and the one thing you really don’t want to skimp on is your psu.

Might be worth having a look at this one by Seasonic, very well reputed psu manufacturer:

http://www.amazon.co.uk/Seasonic-Modular-Multi-GPU-Technologies-Supported/dp/B00607JN1E/ref=pd_sim_sbs_computers_12

750w, and cheaper (at least on the amazon uk site)

#17

Ok, thanks for reviewing the setup ThE_JacO + mattmos! :slight_smile:

#18

Setup looks good, just curious as to why two different brands of similar SSD? I’d be more inclined to pick a single 512 gig SSD, it will be more useful in the future with a larger single capacity, the same way its best to get 2x 8 gig sticks of ram instead of 4x 4 gig ones. Same result now, but youll wish you had bought the larger capacity further down the line.

#19

For the ram I see listed a 32GB ripjaw kit, that’d be 4x8GB.
I hadn’t noticed the dual SSD, yeah, that’d be a bit odd and likely wasteful. Maybe when I read I read it as option 1 and option 2 (in which case 840 pro).

The one situation I could make sense of it for is if one was solely dedicated as an online/cache kind of drive, but it’d probably still be more flexible and better value to buy a 512 and repartition it as needed. Sort of… actually undecided about that :slight_smile:

#20

The 2nd different drive was to test another SSD brand that is expected to be super fast.
But I have chosen not to and now all will be Samsung pro SSDs, no time to “test” being this my only working rig :wink:

still my idea is to separate the OS+apps (1 SSD) from the project data files in a separate SSD to minimize data loss if one SSD goes mad. right now I am also looking for an efficient back-up solution in addition to the installed HDDs or SSDs. do you guys have any sugguestions on this?

as for the RAM, in one forum or pdf sheet I read that the best allocation of RAM for this mainboard is to fill 4 banks instead of 2 or an odd number, so for now 4x8 GB.

#21

The samsung evo is the new ‘hotness’ for ssd. Should be fine for what you’re looking at. not sure a 256Gb drive would be large enough to use as a storage drive for projects though. After a while the renders stack up :wink: I have an ssd for programs and as the current project folder, and a 2Tb drive for all projects. That’s very specific to a small operation though, you may have to experiment to find the best setup for you.

Backup I use a usb3 external drive for data (so if I’m away the drive gets hidden), and also occasionally backup essential files to an online account (www.box.com).

#22

You keep sources, not resulting renders on an online style storage :wink:
That said, unless playback of large data sets is important, it usually isn’t worth it, and it’s a useless separation for safety as that should be left to backups and raid 5 or better redundancy.

#23

Guys I don’t mean to hijack this conversation but I’d rather ask here then start another thread.

I’m building a crazy ass rig for all plugins that are node locked in the office for the fastest render, simulation, Vray RT etc etc.

I have a k5000 already and this rig will take it.

I’ve got a good discount on Intel processors and have been trying to pick between Xeons and the i7.

I’m a little lost as to which is best for Xeons for 3dwork. E5 or E7 and their prices don’t seem accurate on intels website. Xeons seem SO expensive.

The reason behind want a Xeon is that my Dual CPU macpro outperforms all other PC’s here by well, probably just cause its got one additional processor.

What is the current sweet spot price/power if I want to go with Duo CPU setup? I won’t overclock and keep it stock.

Thanks!

#24

Don’t hijack threads. Start a new one.

#25

Actually it’s fine to move along similar threads when possible :slight_smile:
Makes searches and thread browsing more efficient.
Similar enough budget is enough IMO for this to be here.

#26

Some good points made throughout the thread. About waiting for the new Xeons: well the 12 core ones will cost up to $3000 a piece, but there might be better prices for new 6-8 core xeons.

http://www.anandtech.com/show/7214/xeon-e52600-v2-price-list-server-ivy-bridgeep

Considering you budget though the 6 core i7 along with mentioned parts might be the best bet.

#27

This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.