Microsoft Surface Pro

#2

I looked into the Surface to replace my 6-year-old Toshiba Windows tablet, but the non-removable battery kind of kills it for me. My Toshiba only gets a couple hours on a charge, but I have four batteries, so if I’m doing a long life drawing session or something I can just swap them out. I suspect the battery life of a Surface Pro after two years of daily use is going to be pretty poor. Maybe they’ll release some kind of case with a built-in extended battery or something.

I will probably buy a new tablet by the middle of this year, but I think I’m going to go for a more traditional convertible (Lenovo or Fujitsu maybe).

I really like some of Microsoft’s hardware designs though. My 7-year-old Zune is still going strong :slight_smile:

#3

Glad you mentioned that, battery life is another common hit against it. So far in my normal usage it has given a decent 4-5 hour range during constantly swapping between apps, internet, video streams, etc. It is a full 64 bit OS so I understand the drain on battery, especially some of the more intense usage I have seen already online such as running Skyrim. For me I don’t feel the battery life is detrimental though if I was planning on a day of figure drawing on it I would keep my charger nearby just in case or plugged in.

The technology makes me excited because it is a foundation to be built on, I am still mixed about the drift toward tablets overall though. I certainly wouldn’t want windows 8 on my workstation though for a professional mobile device I prefer it greatly over windows 7. Hopefully Microsoft understands this and in future versions maybe just creates a mobile version and traditional version. It’s great seeing technology get faster, smaller, lighter, cooler(temp) and battery life increases into smaller spaces. For now I always keep in mind with any purchase like this you can only have so many traits like take battery life+performance+small size though only pick two.

#4

4-5 hours battery would be fine for me. I’ll buy a Surface Pro as son as I know they will enable presure sensitivity for Photoshop and ZBrush, as pressure sensitivity is my main reason to buy.
Thanks for the tip on office for $80 for students, I think I might go for that.

#5

I remember reading about the Surface Pro and quickly losing interest in it. I don’t remember the reason though. If it runs Windows, why do you need specialized apps so work with the sylus? I thought the whole point of it was that you get everything you could be doing on your desktop in a tablet form factor that runs all the software you already own and want to use.

Are you saying it doesn’t come out of the box with pressure sensitivity? That alone would be a show stopper for me.

I run a Samsung 10.1 Galaxy Note, which is Android OS, but it is the best drawing experience I ever had. It is powerful enough that I do full HD animation, rather than be limited to just sketches, roughs or storyboards. I would have though the Surface Pro should be able to do much much more.

#6

Gabe from Penny Arcade got a loaner recently and gave it a pretty good rundown for drawing use:

http://www.penny-arcade.com/2013/02/22/the-ms-surface-pro

The whole thing with PShop isn’t that it is a different version of the app, it’s that it doesn’t have internal drivers for the surface stylus, so won’t “see” it right now. I think it is more about how PShop is built than any problem with the Surface.

He seems to be pretty jazzed for Sketchbook Pro on it.

#7

I was excited about the Surface Pro and then it came out and had only 4-5 hours of battery life and no pressure sensivity in Photoshop and then I lost interest in it. You guys might want to consider the Samsung ATIV Smart PC Pro instead (http://www.youtube.com/watch?v=63tLJ2qwZdg) or wait until after the summer, when Wacom promised to release their own Tablet PC tailored specifically for artists.

#8

Ahh out of the box the pressure sensitivity is fine what I was referring to is 3rd party software like your regular windows programs not reading the sensitivity yet. Apps like FreshPaint and Sketchbook work beautifully already with no issues. Here is a quick video I tossed together this afternoon showing me running Zbrush since enough people have asked me how it handles.

https://www.youtube.com/watch?v=BZj-0IlhpuM

The response and feedback is smooth, it can be an immensely powerful tool if they get multi touch functions or other input working with it. Same issue for now though with Zbrush not reading the pressure, decent enough that I will use it to sculpt rough ideas or base meshes.

#9

Andrew, are you looking for a windows store app (with the modern UI feel), to do story boards with?

Something that could utilize Charms for sharing, cloud storage (like skydrive), and the ability to do quick markups with say… PNG files or with video files… (perhaps being able to scrub them)?

… just curious.

#10

it is a very pricey device compared to all other competitors

It’s not actually… 1920x1080 laptops start at around 1100$ too. If you consider the small size factor, the Surface Pro is actually a pretty good deal.

The 13inch base macbook pro with only 1280x800 resolution is already 1200$. With the surface, you get 1920x1080, touchscreen, SSD drive + Pen digitizer for 100$ less.

A very fair price to improve your workflow I think.

#11

Exactly, I don’t think anything exists yet though it would be great to draw up a storyboard in a app that could have layers like Photoshop while it saves to a directory on my cloud syncing all content across the board so everyone in a production can see progress. It would be even more useful because on set I can take a pic with the tablet, draw ideas over it and instantly upload to the cloud my idea or progress.

#12

The Surface Pro looks really interesting, but I am waiting to buy untill this summer, since Wacom announced their own tablet will be coming out by then.

#13

If you have a Windows8 tablet then you definitely want to install the FOSS app MyPaint:

http://mypaint.intilinux.com/?page_id=6

It has been smooth as butter on my old Asus ep-121 and has been really the only app I keep coming back to use the tablet for. Unfortunately, the latest 1.1 version is still Linux only, but will arrive eventually. It will really help the workflow with onscreen panning/rotation, which is the biggest hindrance on a tablet with the 1.0 version.

Pressure sensitivity is fine with Mypaint, as I had installed the Wacom driver, but unfortunately the Wacom calibration tool is only 4 point and is slightly off compared to the inbuilt Windows one. I would rather have the calibration slightly off (mainly as you get towards the edges) than have no pressure sensitivity. Krita is the other FOSS app that is growing in leaps and bounds and has the Mypaint brush engine builtin. Can see it eventually being a full Photoshop replacement for studios with its Linux support and OpenColorIO capabilities.

Hopefully with Wacom working on their own tablet, they will get their driver/calibration act together and this will have a nice ripple on effect to all the other Win tablet makers!

#14

Hmm I might try a wacom driver on mine to see if that can at least be a temp fix, any link or reference for what you used that worked?

#15

I just downloaded the generic Windows driver from the Wacom site. Checkout this forum first, before you descend into driver hell, as I don’t know the specifics of the Surface:

http://forum.tabletpcreview.com/microsoft/

#16

just to confirm with the Surface Pro… out-of-the-box, i installed AD Sketchbook Pro and pressure sensitivity was working fine with the included pen… much better than what I was expecting actually.

However, the stylus is no where near as nice as the Wacom and they are not compatible.

There’s a few annoying aspects of this device (besides that price point)… I was considering making a short review video of it (depends if I have time) or just list the issues i have with it.

I plan to check out mudbox and maya on it just for giggles… it only has 4GB of RAM… which again, at this price point is lacking… seriously lacking. I’m not expecting any miracles here on those.

I will be returning this one though… there’s a lovely “bubble” in the center of the LCD about the size of a penny that over saturates colors… (hey QC… WTF!)

#17

well scratch the mudbox idea… “must be amd or nvidia hardware”… lol. that’s a bummer.

#18

I lost interest quickly because it uses an ARM processor and there’s virtually no software available for Windows RT. I haven’t used a Windows RT device yet but I don’t think they can use Windows software that people are used to (like Photoshop for example, compiled for x86). It might run software compiled for x86 but it would have to be emulated which would dramatically affect performance.

It’s a good thing that Microsoft is taking ARM seriously but it’s going to be huge mess for a while as developers figure out how to manage multiple architectures (distribution, support, etc.). Either that or they just ignore Windows RT completely like the Itanium builds of Windows.

Open source software can handle multiple architectures much more effectively than closed source software because the source can usually just be compiled on another architecture (maybe some small tweaks). So anyone can package and maintain whatever they want on a new architecture, but products from Adobe, Autodesk, and the like have a more complex journey from the developers to the end users which is probably what has hindered Windows and it’s software ecosystem on other architectures in the past.

#19

MS Pro is not ARM- it’s full powered Intel i5 processor. That’s wherein lies the confusion with consumers.

Granted I used the Pro at BB with a pen and ended up getting a Fujitsu t901 for $455 off ebay and sold my Dell m6600 (we ironically started carrying them at work so now I get them for free).

The t901 is great but takes some know how to get it going. best part is swappable battery, HDD and added RAM up to 16GB- there is a t902 with higher res screen but it’s 16:9 whereas the t901 is still 16:10.

I think Lenovo has some really good hardware coming out from wireless monitors with pen inputs to the Helix- that’s the route I’d go if I was looking to spend more; although the monitors are said to be close to the price I paid for the t901.

#20

I was waiting for the Surface Pro but ended up springing for the Ativ700t which I love. I actually designed a case for the 700t on the 700t. :slight_smile: I love the portability and I’m getting better at doing without the keyboard. ArtDock helps… I’m thinking I’ll get a helix next. Ill design a case for that as well. Check out my work on the 700t.

http://youtu.be/-QlsQIz71KU

Great for drawing artists!

Isaiah

#21

This is marvelous news!

http://www.theverge.com/2013/5/10/4317986/surface-pro-pressure-sensitive-wacom-driver-download