progressing very slowly with the spines, the top part hasnt been detailed, just trying to get them to look ‘hard-surface’ instead of lumpy clay… thanks to a friend who told me to use clay tube brush instead i think it looks ‘harder’ than the skull and jaw
okay base is next…
cheers,
andrew
Good job!
However,
I think that intervals of eyes of your skull are too wide.
hastalavista, Brother
hello Shimazaki-kun,
thank you for pointing that out… i guess the backdrop i was following was distorted because i flipped it in photoshop… once i get into detailing, i will keep this in mind and refer to photo refs
cheers,
andrew
Howdy folks,
weew it’s been a week since i posted any progress,
i’ve been neglecting this guy far too long…but i have some progress here,
basically ive done all the parts and base, and started detailing the skull,
quite a number of stuffs left then im gonna start polypainting this guy…
then move on to arnie… 2 weeks to go, gotta get my lazy bottom working…
there’s a guy in statueforum.com who bought a life size endoskeleton and posted this very nice detail of the inner eye area which cannot be seen in most of the reference images out there, i thought it might be useful to the guys who’s doing endoskeleton in this challenge
cheers,
andrew
after messing around with arnie for the third day, i finally got something decent to show… i really really need to practice more :argh:
i hope he’s somewhat recognizable now… still not yet close, especially from front view - i will post it when i have it tweaked later tonight
till then
~cheers,
andrew
howdy folks…
here’s after an hour, i thought i was gonna spend more time on him but im kinda tired and it’s 3:00 AM already…well i didnt mean to post every little bit of progress, but i’d appreciate some feedback coz looking at it after awhile it’s kinda hard to tell which part is still wrong, though i know it still is (from different angles it looks totally off)
thanks in advance,
~cheers
Hello, southparx
The endoskeleton is generally very good. A tad bit too organic, and lumpy in places, but seeing how it would be underlying your Arnold Bust… I can’t see how this is too much of a problem.
As for your Arnold Bust… It’s good, but to be honest it looks more like Robert Patrick (the T-1000 for T2) I think the head needs to be generally broader, and the main masses of the face need some more definition, and volume. His forehead should be shorter, and again, broader. His nose needs to be broader (word of the day, lol) and also the volume needs to be increased. Other than what I’ve said It looks pretty good.
Nice work.
hello Steven,
yeahh the endoskeleton is still lumpy on some areas,
i just discovered Flatten Brush yesterday and tried to flatten some lumps - takes quite a lot of time to do and it could go on forever - so i thought im doing whats important first…
which is mister governor here hehe
well this is day 4 with this guy - i lost count how many hours ive been interating him sorry,
added a lot of volumes on the side of his face, the nose is definitely way too thin from the front, mouth too wide… ah yes and i know why he looks like the enemy terminator… his jaw was too small and his hair needed to be broaden more
on this pose i think im getting a pretty good progress… however it’s still really off from front and right side - which is pretty weird coz i have symmetry on haha
once i got the side all pretty much blocked in, im gonna fix the front and turn off symmetry… got better references images this time so i hope it will come out well
any input is really appreciated
till then,
~cheers,
andrew
howdy guys,
just finished with the endoskeleton bust…
i hope you guys like it,
oh please lemme know if there’s anything off with it before i do the turntable
~cheers,
andrew
Howdy folks,
been a bit quiet in here…
so i’m still working on the likeness of Arnold’s face… it’s not going so good right now, ive basically spent almost everyday since last week but never gotten somewhere to the point where my friends can spot who it is :sad: (especially from front view)
it’s gotten me discouraged a lot, but after talking to a friend im a little calm now knowing this is my ‘serious’ attempt on doing likeness and most unlikely i can get it right first time
so i decided to post the progress anyway - really hope you guys can drop a line or two on how to improve it… a friend mentioned he’s too skinny - but it’s really weird when i started adding more volume it looks off further and further… i’ve already basically put a backdrop image on a layer in zbrush and work my ztool on the other layer with transparent basic material - matching the placements and TRACING almost all the visible planes… but alas, still cant capture Arnold
some input is greatly appreciated
thanks in advance,
andrew
Hey there,
What you got so far is looking really good! nice job on the endoskeleton, I think you’ve got what you need there.
Arnie is coming along nice too. I will have to second the comments about the proportions of his head looking more like Robert Patrick (sp?). I think maybe the bust you’re using might be throwing you off a bit because I can see in the first image that IT seems too narrow tooi. I really think Arnie needs to have a wider head and broader jam.
Check out GhostManZombie’s thread, I think he’s got a great example of this on his Arnie model.
Anyways, great work overall, and I hope you combine these two models to make a battle damaged version 
Hello southparkx
i agree with jasona, i think that your reference is throwing you out off, arnold’s likeness , i think that if you get a Real reference of arnold’s and then, stilyze it for your bust… it will come out better… and also the head and the jaw is wilder
keep coming dude…
//cheers…
Hello Helder and Jason,
thank you guys for the critique, you guys are right, i have gathered more Arnold images and i will tweak further…
but i’m putting him aside for now, in the middle of finishing the jacket and accessories for the bust… i hope i can get all of these done today so i can come back to finishing the head, and saturday i plan to deform the face for the battle damage look
in the meantime, here’s some progress images of the jacket… i have trouble controlling the specularity of the material in zb… anyone know how?
and just for fun, i thought i just add some shotgun shells … but since i didnt do my homework well, i just saw that the shotgun shells Arnold was using in the movie was much bigger than these ‘common’ ones… haehae i guess i kinda like mine already so i dont plan to change it
okay on the next post, im gonna submit my entry - the endoskeleton bust…
a little notice, i had a harddrive malfunction a few days ago and i lost the latest progress of the endo bust - where i had little scratches and cavity added in the shader - but i think im just gonna post this one ( one version earlier )
also, since this is my first time submitting an entry in the HMC if i make any mistake, please pardon me and lemme know and i will fix it
~cheers,
andrew
ARTIST NAME :
Andrew Hakim Lie
WIP THREAD:
[http://forums.cgsociety.org/showthread.php?f=208&t=665743](http://forums.cgsociety.org/showthread.php?f=208&t=665743)
Final Image:
[img]http://i207.photobucket.com/albums/bb131/south_parx/terminator/Endoskeleton_600800.jpg[/img]
link to full size image:
[http://img169.imageshack.us/img169/4669/endoskeletonlargeio0.jpg](http://img169.imageshack.us/img169/4669/endoskeletonlargeio0.jpg)
Beauty Render:
[img]http://i207.photobucket.com/albums/bb131/south_parx/terminator/Endobeauty_800600.jpg[/img]
link to full size image:
[http://img404.imageshack.us/my.php?image=endobeautylargexg1.jpg](http://img404.imageshack.us/my.php?image=endobeautylargexg1.jpg)
Orthographic Images:
[img]http://i207.photobucket.com/albums/bb131/south_parx/terminator/EndoskeletonFront.jpg[/img]
[img]http://i207.photobucket.com/albums/bb131/south_parx/terminator/EndoskeletonSide.jpg[/img]
[img]http://i207.photobucket.com/albums/bb131/south_parx/terminator/EndoskeletonBack.jpg[/img]
[img]http://i207.photobucket.com/albums/bb131/south_parx/terminator/EndoskeletonTopBottom.jpg[/img]
wireframe
Software used:
Zbrush,Photoshop,3dsmax
Comments:
this is my first HMC, a first part of two. i chose the Endoskeleton because i want to learn to do semi-hard-surface in zbrush. The bust itself was modeled from Sideshow Toys' version of Endoskeleton
link here:
[http://www.sideshowtoy.com/?page_id=4489&sku=83331](http://www.sideshowtoy.com/?page_id=4489&sku=83331)
except for some basic cylinders which was done in 3ds Max, pretty much everything else is in zbrush which i intended to. lastly photoshop was used to compose the final image only.
the biggest hurdle with this model is probably the poly count, which the total of all the parts combined is around 22 million polygons. i had countless crashes e.g when i do changes of subtools, and dropping the model to the canvas for ortho renders itself had its share of crash
But all in all, it has been a great learning process. Thank you for everyone who has commented and helped me out during the making
Sincerely,
Andrewhello its me again…
so im back to tweaking arnold, i think im getting somewhere this time … i decided to not rely on backdrop images and tweak more different angles from a couple reference pics…
im gonna spend a little bit more time fixing mainly the lips which i find too thin right now, but other than that, i think i’m gonna move on and start polypainting him for the battle damage base… i can tweak this forever but deadline has to be met
well if you guys have input i always appreciate it
thanks in advance,
andrew
here’s my progress on polypainting for those who interested…
i learned this method from Scott Spencer’s book Advanced Character creation by Sybex… i think it’s coming along pretty nice i kinda liking the result…tho again, im having problem controlling the specularity 
again, input is always appreciated
thanks,
andrew
ARTIST NAME :
Andrew Hakim Lie
WIP THREAD:
http://forums.cgsociety.org/showthread.php?f=208&t=665743
Final Image:
link to full size image:
http://img227.imageshack.us/my.php?image=arnoldfinallargeqh6.jpg
Beauty Renders:
links to full size images:
http://img79.imageshack.us/my.php?image=arnoldbeautylargezz5.jpg
http://img140.imageshack.us/my.php?image=arnoldbeauty2largeza2.jpg
Orthographic Images:
Wireframe:
Software used:
Zbrush,Photoshop,3dsmax
Comments:
The second part of two: Terminator T800 battle damage. i wanted to learn how to do likeness and since i liked arnold it’s a great choice. i again chose Sideshow Toys’ version.
link:
http://www.sideshowtoy.com/?page_id=4489&sku=8318
The major obstacle with this model was achieving arnold likeness. the most laborous process was painting the wounds and bullet wounds, it gets quite boring after second day of doing the same thing over and over.
But all in all, it has been a great learning process. Thank you for everyone who has commented and helped me out during the making
Thank you.
Best regards,
Andrew
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.
