print size vs pixels..how to ?

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

THREAD CLOSED
 
Thread Tools Search this Thread Display Modes
Old 02 February 2006   #1
print size vs pixels..how to ?

hello all,

i have a little problem here & i need some help,i have to render a scene to be printed on a
(5 x 8) meter " (16.4 x 26.2) feet " paper & am not sure on which resolution should i render is there a way to determine that ?? as i don't want to get any pixelated printout after a long render..
any help would be much appreciated..
 
Old 02 February 2006   #2
The best solution would be to ask your client. If the client doesn't know, ask him for the phone number of the company/store which is going to print this, they should know.

A render in that size will be pixelated(I think) because you won't render this in 300 dpi.
Sounds loike a billboard or something and nobody wil come that close to see any pixels.

Once again, ask your client, they should know.
 
Old 02 February 2006   #3
print size vs pixels..how to ?

Dear
normal resolution for a printing is generally taken as 150,good=300, vry gud=600 and too good=1200...etc
but it leads to heavy file size as in ur case it ll b very heavy with 600 to 800ppi.
jst go for 300 as normal and chek it by presing print size button/option under view menu.
if it shows pixalated u can increase it else go with.
be sure to turn it before painting and if u scanned it..always scan at double the resolution u needed for the final output.
1" x 1" box with 300 reso and rgb mode gonna cost u in memory as 900 bytes and 1' x 1' = 144 x 900 = 129600 bytes or u can say 129.6 kb or .129 mb so u can calculate abt the ram part as well...etc
__________________
tezi
 
Old 02 February 2006   #4
If you use Maya, there are few new parameters in v7 under the render globals where you can adjust size, resolution... for prints
 
Old 02 February 2006   #5
total_sinner,

I'd suggest you find out how far away the printed piece will be viewed from. A 16'x26' piece suggests to me that the audience may not be looking at if within a 6 foot range. If this is the case, then your printer may let you prep the file at less ppi since no one will be close enough to see the dots.

I've done a highway billboard (wide ink jet print) that was printed at 30 feet wide by 12 feet high and the ppi was 27. If the ppi were even 150, the file size was something like 2+Gigs!
__________________
-- m|3
 
Old 02 February 2006   #6
you can also use 3ds max Print Size Winzard, if you are using 3ds max for your work. it really helps to determine the exact DPI and print size.
__________________
"There is no possibility of cheating in art. It is either good or bad."
---
http://www.3dallusions.com/forums
http://pra-seth.3dup.net
 
Old 02 February 2006   #7
Thread automatically closed

This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.
__________________
CGTalk Policy/Legalities
Note that as CGTalk Members, you agree to the terms and conditions of using this website.
 
Thread Closed share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 07:13 AM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.