How to do this the elegant way?

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

THREAD CLOSED
 
Thread Tools Search this Thread Display Modes
Old 07 July 2005   #1
Question How to do this the elegant way?

Hello there,

this is my first Thread and Posting on CGtalk.com.
I am not really the best in writing and speaking english but i think you'll understand what i mean

There is my 'problem':
First.. i use Lightwave 7.5c.

Ive made a disc and beveled it sometimes to model a bowl or something. Now i would make this thing ready for subpatches. Especially i mean this polygon:



I have tried "collapse poly" but when i press tab after this action
i got these ugly stripes:



Is there an elegant (nice) way to make this circle ready for subpatching?

greez beginner
 
Old 07 July 2005   #2
Originally Posted by the_beginner:
Is there an elegant (nice) way to make this circle ready for subpatching?

greez beginner


Hi, this is my first post as well, so not sure if it'll show up before someone else answers your question, but...

instead of using a disc to make your bowl, make some points on one of the viewports, connect the polys with an closed curve, then Lathe the thing around the corresponding axis (I'm assuming you know how to lathe- if not, there are many tutorials out there to help). Make sure after selecting the points you don't make a polygon, but rather a closed curve (default ctrl^p), otherwise you'll get those lines again. I just ran into the same problem yesterday, heh. Hope this helps!
 
Old 07 July 2005   #3
I think the reason this looks bad is because there is a mix of 3 and 4 sides polys. 3 sided polys are best avoided when using subpatches.

If you really need a subpatch bowl, then I would start with a flat 2 by 2 cube, and then scale in the outer corner points to form a nice rounded surface. Then use the smooth shift and bevel tools to extrude the shape you need.

Hope this helps!
 
Old 07 July 2005   #4
For the interior circle, do make pole and fix pole to smooth it. Add a couple of bandsaws to get sharper edges ahd that should be fine.

IMHO the best way to make a bowl is to draw its profile using the pen tool and lathe it.
__________________
Splinecage the place to go
Listen -- strange women lying in ponds distributing swords is no basis for a system of government.
 
Old 07 July 2005   #5
You could bevel the bottom polygon in a few more times, to further define the bottom of the bowl. If you then collapsed the middle poly, it should sort you out. But I usually do like telamon says, and use the lathe tool.
 
Old 07 July 2005   #6
Thank you, both methods works fine (holys & telamons)
 
Old 07 July 2005   #7
Other simple way is to begin with a disc with 8 sides





Gerardo
 
Old 07 July 2005   #8
Use the 'Spikey' tool on the big centre polygon, this will divide it up iike slices of pie into triangles. Then of course if you select and merge two neighbouring Triangles you end up with a quad.
__________________
http://www.halogenic.com
 
Old 07 July 2005   #9
Thread automatically closed

This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.
__________________
CGTalk Policy/Legalities
Note that as CGTalk Members, you agree to the terms and conditions of using this website.
 
Thread Closed share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 12:06 PM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.