Lenn Roberts - Animation Session 9 - pommel horse

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

THREAD CLOSED
 
Thread Tools Search this Thread Display Modes
Old 08 August 2004   #1
Lenn Roberts - Animation Session 9 - pommel horse

08-20-04
here is my 2 cents so far...
the model and rig are done by a friend of mine (thnx keith -not lango)
still very rough, but u get the idea. about 8 hours so far... night

edit: http://flxdigital.com/warped/kira_olympic.mpeg
i would right click this...
edit: (thanx for the heads up folks)
__________________________________________________ ____________________________

08-23-04
here is my first set of adjustments, mostly just some quick timing things (still more to do). i also removed the ending where sher raised her arms... it was supposed to be the same psoed from the begining of the animation, but noone was getting it (exdcept me) so out it came.

the whole feet setup is beyond my controle. i m not good at rigging so a friend sent me this one. there is no way to switch between fk and ik in this rig, so i m just doing what i can with it.

i intend to fix some of the arm and leg locking at the same time i do the hands opening and closing... and whatever else needs to be done.

enough talk... here u go:
http://flxdigital.com/warped/kira_olympic_02.mpeg

and thanx for the input so far... very helpful
__________________________________________________ ____________________________
08-24-04
spent a few min cleaning up the hands and some of the locking... for the most part i am almost done with this. i admit i dont like it all that much... but i am thinking about doing a second event in the next few days.
any and all crits welcom/demanded
http://flxdigital.com/warped/kira_olympic_03.mpeg
__________________________________________________ ____________________________
08-26-04
not going to do much beyond this... except to chage the timing like it was suggested to me. i just hope i have the time.
http://flxdigital.com/warped/kira_olympic_04.mpeg
__________________________________________________ ____________________________
08-30-04
the start of the timing adjustment... expect longer pauses at the height of each swing... and an end to that anoying popping throuought the swings and especially at the endin the "l" hold.
http://flxdigital.com/warped/kira_olympic_05.mpeg
http://flxdigital.com/warped/kira_olympic_06.mpeg *final (unless time alows)
__________________
"You can take my art when you pry it from my frozen, Canadian hands" ~ Me, just now
http://www.flxdigital.com

Last edited by FLX : 08 August 2004 at 09:54 PM.
 
Old 08 August 2004   #2
Getting a quicktime error with this one!
__________________
"There Really is No Secret"
Martin Brennand - mocha Product Manager - Imagineer Systems
 
Old 08 August 2004   #3
same for me
 
Old 08 August 2004   #4
same , you need to reupload i guess.
 
Old 08 August 2004   #5
the link should now work in the original post... mpeg 1 until i get a working sorenson 3
__________________
"You can take my art when you pry it from my frozen, Canadian hands" ~ Me, just now
http://www.flxdigital.com

Last edited by FLX : 08 August 2004 at 12:02 PM.
 
Old 08 August 2004   #6
ok this one work.
Pretty nice start. I think that her legs seems a bit too light. May be because they are in ik, if you can try to switch to fk, it could be more easy to tweak in this kind of exercise. I also don't really understand last arms movement. I think you wanted to mean some kind of reverence, but it doesn't fit really for my opinion. And last thing, the pommel horse is brocking while there are no inertia at this time of the animation, this is not really logical.
The other stuff is pretty fine.

Cheers and good luck
 
Old 08 August 2004   #7
update up there
__________________
"You can take my art when you pry it from my frozen, Canadian hands" ~ Me, just now
http://www.flxdigital.com
 
Old 08 August 2004   #8
new update up there... again. not the one mentioned in the post above this one... aw hell u can see when u get up there...
and ill stop rambling... now
__________________
"You can take my art when you pry it from my frozen, Canadian hands" ~ Me, just now
http://www.flxdigital.com
 
Old 08 August 2004   #9
FLX....it feels a little slow to me at the moment....and the cog could use more arcs i'm thinking...something just looked a little off to me...I like the idea and with an extension you've got plenty of time to keep working on this bad boy if you're other commitments allow it....keep going man
__________________
Animator
 
Old 08 August 2004   #10
updated.

remi, you are most wise and i agree with the slow comment completely.
__________________
"You can take my art when you pry it from my frozen, Canadian hands" ~ Me, just now
http://www.flxdigital.com
 
Old 08 August 2004   #11
Let's see that sucker get a little faster
__________________
Animator
 
Old 08 August 2004   #12
just because u asked/demanded remi... i will fix the things i mentioned up top (on everyones advice) in the next week and a bit.
__________________
"You can take my art when you pry it from my frozen, Canadian hands" ~ Me, just now
http://www.flxdigital.com
 
Old 08 August 2004   #13
Very sweet!

Your first animation post was a little slow, I am glad you speeded up the falling part.
__________________
ONLINE PORTFOLIO
 
Old 08 August 2004   #14
Looking good! The fall especially. Maybe a bit more flow between the halt and the fall though.
__________________
"There Really is No Secret"
Martin Brennand - mocha Product Manager - Imagineer Systems
 
Old 08 August 2004   #15
Allright ! this final one is very good. I love the weight on the feet transition now. Good work !
 
Thread Closed share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright ©2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 02:25 PM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.