Going to be building a workstation. Please help!

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

Thread Tools Display Modes
  06 June 2012
Question Going to be building a workstation. Please help!

hello all,

i'm going to be building a workstation soonish. hopefully by the end of next month.

the computer i have now isn't powerful enough to run the programs i use (Maya 2010, Zbrush 3.5 R3, Photoshop CS4 Extended and Illustrator CS5), so i've decided to build my own.

i was wondering if anyone might be able to tell me if the equipment i've picked out to buy will be sufficient for what i use. if there's anything that anyone feels should be replaced with something else, please let me know.

my budget for this is currently $2000-$2200.

this is what i have selected so far:

http://www.newegg.com/Product/Produ...N82E16811129087 (Purchased)
http://www.newegg.com/Product/Produ...N82E16817371052 (Purchased)

the case and power supply have already been purchased, since they were on sale last week.

if i've missed anything, please let me know so i can add it to the list.

thanks in advance for any help
  06 June 2012
can't do wrong with Intel, my older i7920 is still alive and kicking hard. They offer nice over lock options, except heard the latest 3rd Gen don't of well. for example got my older chip running at 4ghz (3.97...) and added 24gb or ram.

As far as video goes for your apps I'd go and radeon if you don't plan on procards. I have a 5850 and it runs Maya flawlessly.
CK Pinson
  06 June 2012
you're going to have a hard time trying to fit that socket 2011 3930k cpu into a socket 1155 motherboard. Might try looking into an Asus sabertooth x79 or similar

I'd personally choose a Noctua NH-D14 cooler over water cooling like the corsair H80 - less chance of a water pump failing and your system being out for the count - which can happen during extended unattended rendering sessions.

If you did decide to go with the noctua cooler, instead of going with the corsair vengeance memory, I'd go with corsair dominator. This way you can easily remove the heatfins without having to use a hair dryer to remove the vengeance heatsinks and then have to scrape off glue in order to have them clear the heatsink.

Last edited by sentry66 : 06 June 2012 at 03:46 AM.
  06 June 2012
LMAO- I didn't even bother going to all his links- I agree with sentry- either choose a closed circuit liquid coolant system or choose an air one!
CK Pinson
  06 June 2012
i fully admit that i don't know too much about pc hardware, but am more than willing to learn. i know how to build a computer, but i wouldn't be able to tell anyone all the ins and outs of every individual piece.

one day i'll know what to do without asking for assistance.

anyway, i switched out a few things, so here's what i have added:


as for the video card i chose, i heard it was a fairly good one for maya and zbrush, and is within my budget. i might be able to get a quadro 4000, if i hold off building this till the end of next month, but if anyone has a suggestion on what card would be best for me, please post it

if there's anymore info anyone can give me, or anything else that i should replace, please let me know.

thanks again for the help.
  06 June 2012
Like I said- the ATI cards work good in all the apps you've mentioned=- cost a ton less than quadros and not to mention perform better playing videos and games- so it is the ALL-AROUND best choice if you ever plan to use this machine for more than CG stuff- I trialed Mari and have to say even that performs as it should on the unsupported ATI card.
CK Pinson
  06 June 2012
Originally Posted by CKPinson: Like I said- the ATI cards work good in all the apps you've mentioned=- cost a ton less than quadros and not to mention perform better playing videos and games- so it is the ALL-AROUND best choice if you ever plan to use this machine for more than CG stuff- I trialed Mari and have to say even that performs as it should on the unsupported ATI card.

groovy. any ATI card, or is there one in particular you would recommend?

i really appreciate the help

would this card work well with the setup i'm working on?


Last edited by Chiyo18 : 06 June 2012 at 07:48 PM.
  06 June 2012
That's a Pro line card- Heard great things about them and Maya- although that is a little on the lower end of the spectrum= I'd get a higher end (same price range) consumer card before I got that.
CK Pinson
  07 July 2012
lower end, huh? alright.

well then, in your opinion, what card would you recommend i get for my setup?
  07 July 2012
I can't speak for everyone, and know others had better luck, but I've been burned by AMD's pro line of cards with maya - at least the entry level one I bought when I was testing the AMD waters. Wouldn't draw things right or select things correctly regardless of driver or setting I used.

Ironically, i've had great luck with their consumer gamer cards like the Radeon 7950 working well with everything and having massive performance in maya's viewport 2.0 and solid classic viewport performance.

I'm a little skeptical about nvidia's consumer gamer cards after they started botching their drivers specifically to hinder maya performance. From what I hear, there are certain modern ones that do work well with maya, but you'd have to research that.

Last edited by sentry66 : 07 July 2012 at 03:02 AM.
  07 July 2012
i also heard that amd doesn't really play well with maya, which is why i decided to choose a geforce card, at least for the time being.

i'd still like to hear what others believe to be worthwhile cards to use with maya, but i'll also be doing a bit more research as well, to find just the right one for me.
  07 July 2012
well things are different with Nvidia now that they've started hindering their drivers with maya performance. You can't rely on everyone's word unless they've specifically tried using the newer geforces. So you're not better off with a geforce anymore unless maybe if you're using viewport 2.0 with the newer versions of maya.

That's something else to find out from people - some people don't even use maya's classic viewport anymore, so when they say new geforces are fantastic, you need to know if they're talking viewport 2.0 or classic. From what little I know, they work great in viewport 2.0

I'm using an AMD radeon 7950 now and it's been pretty fantastic - not perfect, but considering its price and how well-rounded it is, I do give it a recommendation. A new modern geforce, might only give you 1-2fps in maya's classic viewport and that wouldn't be usable for you with maya 2010

Last edited by sentry66 : 07 July 2012 at 06:12 AM.
  07 July 2012
okay, after doing some searching around, i've found this card, which, after reading a dozen posts on several different websites, seems to be plenty compatible with the sabertooth motherboard.


still came across a ton of forums talking about how the amd cards don't work too well with maya, but a lot of people were saying that you can downgrade to previous drivers to get things to run a little smoother.

so, in regards to that information, would this card be sufficient for my build?

i'm sorry for asking for so much help. i just really want to make sure that i don't waste money getting things that aren't compatible with other bits of hardware.
  07 July 2012
looks good to me
  07 July 2012

so the card, coupled with the new motherboard, heatsink, and memory, should give me everything i need to start building, yes?

i hope so, cause i can't wait to get started

thanks so much for all the help, guys. couldn't have done it without you

if you, or anyone else, have any further suggestions, please let me know
Thread Closed share thread

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Society of Digital Artists

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump

All times are GMT. The time now is 02:38 AM.

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.