CGTalk > Techniques > Lighting and Shaders
Login register
reply share thread « Previous Thread | Next Thread »  
 
Thread Tools Search this Thread Display Modes
Old 04-07-2017, 09:10 PM   #1
designingpatrick
I like to make things
 
designingpatrick's Avatar
portfolio
Patrick Coan
Professional Student
Guild of Build
Portland, USA
 
Join Date: Jan 2007
Posts: 546
Rendering with changing lighting conditions

Bright indoor lighting, then lights in the scene turn off, and the illumination comes from outdoors. Very low light, with sharp metalic reflections. The intent is to have a good exposure in both cases. What approach would you take?

Two exposure settings on the camera? Or adjust the exposure in post? What would happen in practical film in a case like this?
 
Old 04-09-2017, 07:43 PM   #2
alanmonroig
Scout
portfolio
Alan Monroig
Barcelona, Spain
 
Join Date: Mar 2010
Posts: 40
Hello,

In film the camera exposure while recording can only be modified adjusting smoothly the aperture of the diaphragm. The shutter speed has to be 180š (double the frame rate) to have correct motion blur and avoid light flickering, so this canīt be modified. And the sensitivity of the film of sensor canīt be adjusted live. Increasing the Neutral Density filter can also be an option but it wonīt have a smooth change in exposure as with the diaphragm

Since in 3D there is no real diaphragm nor lens, you will have to fake the change of exposure with alternate methods. A change from an interior to an exterior scene may be posible with the dynamic range of 32bit image. So doing it in post-production could be an option. If the contrast of lighting is too drastic a different approach could be animating the "exposure" setting of the 3D camera, many 3D renderers have this option (arnold, vray). Or if this option is missing, animate the exposure of the lights until you get the desired effect, focusing on art direction rather than on physical qualities of the light.
__________________
Alan Monroig (VFX and 3D Artist)
www.alanmonroig.com
 
Old 04-12-2017, 08:59 PM   #3
designingpatrick
I like to make things
 
designingpatrick's Avatar
portfolio
Patrick Coan
Professional Student
Guild of Build
Portland, USA
 
Join Date: Jan 2007
Posts: 546
Thanks, that is very helpful.
 
reply share thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright Đ2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 06:51 PM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.