Silo not exporting STL files

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

 
Thread Tools Display Modes
  05 May 2018
Unable to export .stl files

We are a team at an industry working with silo and since we upgraded to the new version we are unable to export in .stl
Its of a great importance we manage to do so, our models are being 3d printed.

I noticed there is a problem in exporting also in obj.

Is there already a threat about exporting?
 
  05 May 2018
Export .STL files error

I have been trying to export objects in stl with no success. Anyone experiencing a similar issue? Please help
 
  05 May 2018
Silo not exporting STL files

Hello,
I have been working with silo for quite a while, my work involves exporting a lot of stl files, i work with jewelry. I seem unable to do so after upgrading to the new version

Why this happens?
Any ideas? anyone experiencing the same?

I am 3d printing, any other format that could be useful?
obj doesnt keep the smoothess and dxf files seem to be broken also.

PlEASE HELP
 
  06 June 2018
Something strange going on.

When I save an stl from Silo and load it back in I get "unexpected end of file"

File appears to load into blender just fine, but Flash Print which I use with my 3D printer throws up an error, unable to import the file.

I compared Silo ascii stl output to blender and all that I could see different without delving in to much was that Silo's stl data was indented and blender's was not.

I removed the indents and the file now loads into Flashprint just fine... But it won't load back into Silo! :] Hopefully it will be fixed in the next update.

To keep obj smooth you need to enable 'export subdiv mesh' in save options.
__________________
Some basic silo tutorials
 
  06 June 2018
Hello and thank you for replying. How do i remove the indents. I figured out the obj exporting setting
 
  06 June 2018
Originally Posted by mrjay3d: Hello and thank you for replying. How do i remove the indents. I figured out the obj exporting setting


I opened the stl in a text editor (notepad++) to remove the indents
__________________
Some basic silo tutorials
 
  06 June 2018
I am having a similar issue. I have a forum thread describing a similar issue
Anyways, here is how my issue is related.

I am having trouble exporting my .sib file to .stl. I have tried the following without any
success:


* Export Scene (.stl)
* Save selected objects (.stl)
* Create new Scene -> load into scene (existing .sib file) -> Export (.stl)
* Save as .stl

The following is working thought

* Create a new scene -> create cube -> export scene (.stl)

It seems that my old(er) files are not being exported, but new files are exportable. I am able to export to .obj, but I need it in .stl in order
for my 3D-printer to work.


I am running MacOS High Sierra version 10.13.3,and I am running Silo3D version: 2.5.4 Professional through Steam.

I sent this message to Silo3D Nervecenter directly, and I got a reply saying that they would look into the issue, requesting my .sib-file. I never got a reply after sending them my .sib-file. Maybe they are working on a fix to solve the problem.

Last edited by Johnonym : 06 June 2018 at 07:39 AM.
 
  06 June 2018
Originally Posted by Cinnsealach: I opened the stl in a text editor (notepad++) to remove the indents
I opened the stl in a text editor (notepad++) to remove the indents

hello, it doesnt seem to work i am unable to do that. We are a company updated our silo to the newest version , we habe 3 silos running and unable to save in stl. The files exporting in stl are less than 1mb i think there is no 3d data there in the form of stl even if i figured out how to remove the indents which i find impossible, i am pretty sure is not that. Maybe anything else in the exporting stl options? I think is just Silo is not exporting in stl there is a sort of issue, i get almost empty files by exporting...Any other alternative in exporting for printing? Objs work but are not good for 3d printing its very easy to get errors. I am sure many people experience the same issue.
 
  06 June 2018
Until it's fixed I would suggest installing an older version that exports working stl files.

You can download every release going back to 2.3 on the Silo downloads page.
__________________
Some basic silo tutorials
 
  5 Days Ago
Just wanted to check since I saw the last post for this thread was 4 weeks ago, there is no fix for STL exporting in Silo 2 or newer versions? The only fix is to use an older version? Just wanted to make sure I understood thats what was going on. I can't export STL either, it just shows a blank file or crashes whatever printer I try to load it into.
 
  4 Days Ago
I did some experiments in order to figure out why I was not able to export to .stl. I had one object in my scene, which was imported as an object/stl from another software, and that object was the reason I was not able to export to .stl. After deleting the foreign object, I was able to export to .stl again.
 
  3 Days Ago
I was able to fix it! Well, sort of. So in Silo 2.0 I turned off the binary export portion and left only the mesh on under STL export options. It exported just fine! I printed out my model with no issues as well, maybe a few other people could try it to see if it can help out.
 
reply share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 11:58 AM.


Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.