|05 May 2018|
Honolulu, United States
Videos of Value
Hey everyone, I decided to make this thread to inspire upcoming artists and show that there are so many valuable free resources online that anyone can access.
In addition to this, since I myself know that so many resources can be just as overwhelming as they are inspiring, for every video I post I will comment about why I see it as a valuable research and what I personally learned from it. Also, since I wan't this to be a learning experience for me too, I won't post all the resources I learned from at once. Instead I'm going to try and re-watch all my old resources and try and pinpoint the reason why I found it important.
Feel free to post your own favorite video's and write a little about why it is important to you and what you learned about it.
For the first video I'm going to choose a new resource that got me thinking about this idea.
This is a lesson in clay from the Stan Winston School YouTube channel, which has a lot of good videos.
How to Sculpt Wounds & Gashes
What I leaned:
Timestamp - 0:25
When a wound is healing it's will do this by turning the skin back into the body.
To emulate this look soften the edges of a wound.
Timestamp - 3:00
Create a subtle light shadow around the wound to create the look of swelling, which is an important feature that all wounds should have
To emulate this look sculpt into the clay, creating 'soft trenches', around the wound you are sculpting.
Timestamp - 4:30
Create deeper cuts in inner wound to emulate chunks of fat that would fall out of a wound.
Timestamp - 6:20
The impact point of a wound will be wider and have more swelling, wheres the exit point will have less swelling and be smaller.
Last edited by martintk : 05 May 2018 at 06:11 AM.
|05 May 2018|
Honolulu, United States
Hey everyone, it's been a while since I posted so I got a new video.
This one is about the weapon design of the P90. Before I did characters I wanted to be a weapons modeler and loved the videos on this guys channel. He always has great breakdowns of weapon design and their used in film and video games.
P90 by Ahoy
What I learned:
Timestamp - 1:56
The magazine of this rifle inserts behind the trigger to feed directly into the barrel and increase its compatibility.
Timestamp - 2:30
Uses a transparent polymer material on the magazine so that the user can count the amount of bullets left inside the magazine.
Timestamp - 2:36
Uses many polymer materials through out the weapon design to save on costs and weapon weight.
Timestamp - 4:46
Comes ready to go out of box, with ambidextrous buttons and an integrated reflex sight. Will eject its ammo casings downwards away from the users face
Timestamp - 3:05
Uses its own type of cartage.
This ammunition has a smaller projectile, 1/4th the size of 9mm handgun ammo, but with a larger charge making it resemble a miniature rifle round.
Having a smaller projectile flying faster meant it created more energy in a smaller area making it possible to penetrate body armor.
The compatibility and ability to penetrate body armor made the P90 popular for use by military, police, and others who needed a sub machine gun in close quarters combat.
|06 June 2018|
Honolulu, United States
I'm back with another video, this one is from the amazing hard surface modeler Alex Senechal.
A Few Common Scifi Mistakes - Quick Ways to Improve by Alex Senechal
I'm not going to timestamp every tip for this one because the video is 40 minutes long but I'll timestamp the main parts of the video
What I learned:
*Syfy is always going to be grounded in artistic and functional reality. Even things in the future will be made for their function.
Cliches seen in SyFy - 01:30
This section is for cliches that Alex sees a lot in peoples SyFy work, try and keep these cliches to the upmost minimum when making your work.
*Bots in every corner of pannels
*Caution Tape everywhere, Caution tape is a very strong visual que in modeling, use it sparingly in areas that need it to show dangerous zones.
*Insets and extrusions based on pre-made geometry. "Break the box" learn how to make cylinder insets inside of square surfaces.
*"Sandwich affect" Avoid placing similar shaped details stacked on top of each other. Use size variation to break up detailing.
*Vents. Vents should be used with intention, it there is a vent there should be a reason why this hard surface part needs to expel exhaust in that area, if you don't have a reason, don't have a vent.
Cables & Pipes - 10:00
3 Main types of pipes
1. Singular pipes
2. Organized cables - sets of cables following a singular path, part of a larger system
3. Disorganized cables - Cables that don't follow a specific system.
*Know when to use each type of cable
*Integrate your pipes into the larger structure, don't just stick them on afterwards.
*Build your pipes into your structure
*Use shape hiarchy for pipes, larger pipes are sturdier and more important.
Breaking the Box - 16:20
*Model outside of basic square and cylindrical primitive shapes
*Use large bevels and plane changes to break out of boxy shapes
*Learn how to model and design complex forms, this will help with your confidence in making shapes that are not basic shapes. Helps "break the box"
Greebles - 22:45
*Know the meaning behind the forms you use.
*Don't just add in greeble detail because it's "cool", know the reason behind the shapes you add in.
*When placing detail, place it with intention
*Balance your forms, too much detail is disorienting. Have areas of rest as well as areas of detail
*Having areas of rest and areas of detail helps us to know whats important. EX, if you have a dashboard with a bunch of red blinking buttons it's hard to know which is important. If you have a dashboard with fewer simple buttons and one blinking red button it's easy to tell what is important.
*Use hierarchy of from, Large cuts will break up bigger parts of the forms, whereas small cuts break up more detailed ares of the forms
Tangents - 26:20
*A tangent is when 4 lines intersect in one point.
*Limit your tangent connections to 3 lines intersecting. "
*Avoid breaking your panels on ever edge.
*Offsetting your panel cuts and edges can help reduce the amount of tangents your model will have.
Illumination - 30:55
*SyFy is functional, and by this metric illumination and lights will be functional.
*two things that the function of lights can do
1. Represent a toggle (on/off) (Loaded/empty)
2. Illuminate something that cant be seen otherwise
*Use your illumination sparingly. Like my example for greebles "EX, if you have a dashboard with a bunch of red blinking buttons it's hard to know which is important. If you have a dashboard with fewer simple buttons and one blinking red button it's easy to tell what is important."
*Lights will be one of the strongest parts of your scene, so use them sparingly
Aligning Diagonals & Avoiding Random Diagonals - 32:25
*Only have a few sets of diagonals you use. Keep your diagonals parallel with each other. Too many different diagonal angels becomes confusing fast.
*Add counter diagonals sparingly. These counter angles will be perpendicular to your other diagonals.
Rest Area & 70/30 - 34:12
*Rest Areas: The areas of the design that are simple
*Detail Areas: The areas of the design that are complex "art of the design"
*70/30: General rule of thumb when designing, have no design be either 100% detail or 100% rest. Also avoid 50% detail & 50% rest
*Halo would have the design language of 70% simple forms and 30% detailed forms
*Gears of War would have the design language of 70% detailed forms and 30% simple forms
*70/30 principle can be used for color as well, EX 70% grey (simple color) 30% red (complex contrasty color)
*30% of a contrasting color will draw the views eye to that place and make it seem important
*Same goes for plane changes 70% large plane changes 30% small complex form changes
*Can be used for where you place detail on a line. Either place detail at 30% mark of line "beginning of the line" or at 70% of the way "End of the line"
*Learn the rules first before you try and break them.
|reply share thread|