*NEED HELP* Dynamic Rigging Problem

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

THREAD CLOSED
 
Thread Tools Search this Thread Display Modes
Old 03 March 2013   #1
*NEED HELP* Dynamic Rigging Problem

Hello All,

I am currently trying to rig a spreader bar, which for those who don't know, its basically a piece of metal with two wire ropes hanging from each end. This is used on to cranes to pick up heavy objects at a construction site.

I am trying to make the rigs wire ropes to move dynamically, as well as anything that it has to pick up. I have successfully setup the dynamics on the two wire ropes and I can have them both move freely when using the master control.

Now the Issue! I cant figure out how to have both wires picking up one object. I have tried everything from parenting, to using hair "stick constraints", and creating a separate joint chain for the object with a rigid bind. The closest I can get to achieving this goal is having the object connect to only ONE of the wires.

Here are some screenshot pictures of my setup:
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

If anyone could help me figure this out it would be greatly appreciated.

Thanks,
Tim
 
Old 03 March 2013   #2
Maya 2013? If so, try nHair and transform constraints to keep the wires stuck to the bar.
__________________
Demo Reel 2012-13!
 
Old 03 March 2013   #3
maya 2012

Unfortunately Maya 2012 :sad :.. Any other ideas?
 
Old 03 March 2013   #4
Could try thin flat strips that you turn to nCloth, constrain the bottom verts to the object, and then use those strips to deform the cables with a wrap deformer or something like that.
__________________
Demo Reel 2012-13!
 
Old 03 March 2013   #5
Would it be possible for these nCloth strips to drive the movement of the piece of steel being picked up? I was successfully able to create a nCloth strip the same length as the distance between the ends of each cable of which I constrained the components on each end of the strip to the ends of both of the cables. I'm just wondering if there is a way to parent or constrain the bar to this single piece of nCloth, so basically whenever or wherever the nCloth moves the bar moves with it. Even with the method you just recommended would this be possible? Or do I just need to cash out for the headaches and get 2013?
 
Old 03 March 2013   #6
I don't have time to try this out, but I think it might work. I'm sure there are many ways but try this.

Take an edge from the single piece of cloth, and go to modify > convert edges to curve. Leave history on it, and it should stick on the piece of cloth. Then use a wire deformer to have the curve control the steel bar, and increase the dropoff distance to like 100 or something like that to make sure it controls the whole bar.
__________________
Demo Reel 2012-13!
 
Old 03 March 2013   #7
Thread automatically closed

This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.
__________________
CGTalk Policy/Legalities
Note that as CGTalk Members, you agree to the terms and conditions of using this website.
 
Thread Closed share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 09:37 PM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.