CGTalk > Technical > Technical and Hardware
Login register
reply share thread « Previous Thread | Next Thread »
Thread Tools Search this Thread Display Modes
Old 03-17-2005, 11:53 PM   #31
Lord of the posts
Tarrbot's Avatar
Join Date: Apr 2004
Posts: 637
And oddly enough, more message boards have been lighting up with "hard drive problems" since major stores started doing this.

What do you do? You just find the ones you need to get the job done. IDE isn't supposed to be outside the case either, but people do it.

Glad it wasn't a major issue, though. More importantly, I'm glad it is fixed.
Old 06-07-2005, 12:57 AM   #32
Father of Knox...
glassefx's Avatar
Tennessee, USA
Join Date: Aug 2004
Posts: 340
Send a message via AIM to glassefx
Thank you... I'm printing this tomorrow when I get to work.
Also thanx to whoever pointed out the print format. Boy have I printed out like a boat-load of pages here at CGtalk! They have made indespensable additions to my "3d notebook" I've been building since I started this magnificant artform. Actually my roomate stole mine along with my ryobi gas-trimmer and a eight-hundred dollar Lexmark dot-matrix printer while I lay in a comatose state from an auto-accident.
Old 06-09-2005, 07:06 PM   #33
Lord of the posts
fabianv's Avatar
Fabian Vercuiel
Join Date: Dec 2003
Posts: 679
Send a message via AIM to fabianv
So much information *stares* I wish someone could just build a rig for me.. wouldnt that be nice hehehe
Old 08-17-2005, 02:35 PM   #34
United Kingdom
Join Date: Aug 2004
Posts: 247
I'd just like to add my experience from yester day to this thread as I believe it contains interesting advice.

It's that for some reason I used the windows tool for partitioning, the one in the "computer browser", to delete a partition that I didn´t use. The particular partition was one of three inside an enxtended partition, like an envelope partition if you aint familiar with this. The other two were my prime data partition and my Fat partition. Saying yes to deleting the empty one, seeing it take with it my data partition as well nearly made me swear, I guess Microsoft kindof have spoilt me with these kind of surprises before so there wasn't really much outrage left to use.

The program to fix the situation was Acronis Disk Director-> recovery expert, at the "complete setting" and waiting for a while. Some other program found old changed partitions, if you arrive at this situation check for correct size/amount of empty space at your final solution. If you recover the wrong partition you will likely write over the deleted data in the partition table and loose file data as well.

Finally, if you get into serious trouble that has to do with partitioning, partition table corruption or other non hardware loss of data, I would like to recommend this guy from Denmark;

His free utilities is in my experience the best and definetely safest tools there is for this situation, I had him send me .bat files for a much worse situation I had earlier on and it was a matter of hours before I had everything out of the computer, and then the problems with the fudged partitions fixed as well.

I also have decent experiences with the people and their program at

I of course had a complete backup of my data, but still this was a bit of a wake up to me, Fdisk is evil in my book, forever.

Last edited by habañero : 08-17-2005 at 02:37 PM. Reason: ytop
Old 10-23-2005, 12:02 PM   #35
Sully's Avatar
Mark Sullivan
3d Specialist
United Kingdom
Join Date: Jan 2004
Posts: 617
Send a message via MSN to Sully
Please help I tried to install some more ram to my system this morning which it wouldnt accept and now my harddisk with all my 3d on it (4 years worth) is saying "file system corrupt" when I try to access it and in the properties for this drive its saying the disk is empty...It looks like the new ram has damaged my harddisks file system...Is this fixable ive just been trying to find some software to access the drive but theres so much out there and I dont want to cause any further damage just in case the problem Im having is fixable....
Old 03-08-2006, 03:54 AM   #36
Join Date: Jan 2003
Posts: 150
Send a message via ICQ to fasteez Send a message via AIM to fasteez
i dont know about your hard drive partitionning
if you have an empty space ton install a temporary windows
of if you have a way to brought your disk into a friend computer
there's a soft called getbackdata for ntfs (runtime software )
that works quite fine. it helps me restore about 6GB of disappeared
partitions ( no more MFT -__- ) so dont get hopeless
theres a demo on the website, but its limited in term of Bytes that can be restored.
but if your really in a hurry you can find a way on the donkey...
sorry for saying this coz its not quite good, i know.

if an admin find this misplaced he can delete this sentence of course.

aimer est plus fort que d'être aimé
Old 08-31-2006, 11:00 AM   #37
New Member
rodeo, USA
Join Date: Nov 2005
Posts: 23
Old 02-28-2007, 10:04 PM   #38
hanman solo
here, Yugoslavia
Join Date: Jun 2006
Posts: 68
seems useful info thanks
Old 11-21-2009, 10:21 AM   #39
New Member
Sebastian Tatut
Timisoara, Romania
Join Date: Nov 2009
Posts: 2
Very nice list... needs to be updated(refreshed) though... some nice info about NAS and DAS could, also, be really useful.

Cheers and a nice job indeed.
Old 12-16-2009, 09:23 AM   #40
lurking behind the scene
galentoh's Avatar
Just another Newbie
The Lion City, Singapore
Join Date: Dec 2009
Posts: 29
Thanks for sharing the information Ice Czar!

I see that you had done up extensive research on the HDD topics. Must have took you quite a while to do that.

It's great to see this thread as sticky. Cheers!
Warmest Regards,
Old 11-14-2014, 12:42 AM   #41
gmask's Avatar
Power Sitting
Topanga, USA
Join Date: Oct 2002
Posts: 6,937
Since this seems related so I'll share a tip that has saved my datas bacon on several occasions.

If you've ever had a drive that was no longer recognized by the computer but still spins up it's probably due to a problem with the PCB. For example I accidentally plugged the wrong power supply into a drive and fried the PCB. This was very bad because it had all my current projects on it one of which I had just delivered to a client. It would have cost me thousands to send it to a recovery place but instead I bought another drive with the same model number and swapped the PCB and recovered my files.

A friend of mine was using a drive he got out of the trash and it eventually died on him. He sent me the drive and I managed to find a drive on ebay with the matching model number and did the same thing and recovered his files.

So besides not using drives you found in the trash the lesson here is to do frequent backups and clearly label your power supplies.
blah blah blah
reply share thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Society of Digital Artists

Powered by vBulletin
Copyright ©2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump

All times are GMT. The time now is 02:17 AM.

Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.