Advice on ~$2k workstation build

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

THREAD CLOSED
 
Thread Tools Search this Thread Display Modes
  12 December 2012
Advice on ~$2k workstation build

Hi, I would like to tap this forum's expertise on workstation hardware.

I am an architect that does lots of visualization work. I am planning to build my own PC that is roughly equivalent, or better, in power to the Dell T3500 I use at my workplace.

I've ordered components off of Newegg before to construct my own cheaper PC, but when it comes to these very expensive components I'd like to be sure I'm optimizing my components, and selecting ones that synergize well with each other.

Thus I've looked at Newegg's DIY kits, but they aren't quite what I'm looking for. Here is a workstation for $3,600,
HTML Code:
http://www.newegg.com/Product/ComboBundleDetails.aspx?ItemList=Combo.1050553


And here is one for about $1,000:
HTML Code:
http://www.newegg.com/Product/ComboBundleDetails.aspx?ItemList=Combo.1127839


I was hoping to spend something in between... around the neighborhood of $2,000. Would anyone mind suggesting a build, or pointing me to a resource where I might find 3d workstation builds in the price range I'm looking for? Thank you so much!

J
 
  12 December 2012
Hi, i'm thinking to buy a new computer around march (waiting for next generation intel processer)

I think the in between those two is :
i7-3930k

I don't know about the other, so this thread is interesting for me too.
 
  12 December 2012
what will you be spending most of your time doing on the workstation.. modeling, rendering, or IPR for your visualization?

reason why i ask is because you need to consider what you do most on a daily basis with your workstation, and with what applications. Nearly all applications will not utilize a dual processor system to their full capability and will actually benefit more from a higher clock speed single processor system with more cores.

answering that question will also help determine what type of video card you'll need.

but, at a 2$k limit, you're not going to be able to build a complete dual xeon system that is worth the salt in sweat you put into building it... if anything, your budget for that would need to be more like 5-7$k... and in general, it is a waste of personal resources.

will you need a monitor? if so, a professional grade or would a consumer level like 20" do?.. its' a different in $100s, so you might want to think about that.

i was able to put together a solid workstation using a i7-3930k processor with 64GB ram, plenty of storage, a new case, new PSU, cooling,SSD for OS, 1TB backup storage, and a pro-grade monitor for 2700$... parted using newegg. this did not include graphics cards, as i had two geforce 560's sitting on a workbench (that i got a sale a month before for 79$ each).

it run solid, does what i need it to do.. but for IPR, it will probably fall flat on its face due to the crappy video cards. (not sure, haven't tried it really)
__________________
-- LinkedIn Profile --
-- Blog --
-- Portfolio --
 
  12 December 2012
Hi tswalk, thanks for the reply!

I will be equally modeling and rendering on the machine. I'm most concerned about its rendering efficiency.

I already have an IPS monitor... so am just looking to build the tower itself. The machine you built sounds tight!

I found a $2500 build here:
HTML Code:
http://www.hardware-revolution.com/2500-workstation/

What do you think of it?
 
  12 December 2012
i think you would be very disappointed with its' performance.

look at this chart, the value/cost is very low.

http://www.cpubenchmark.net/cpu.php...2.40GHz&id=1249

and if you look at this chart and find the dual xeon E5620...

http://www.cbscores.com/index.php?sort=rend&order=desc

i think you start to get the idea and notice that until you invest in something like the
X5650 dual xeons (~800$ USD each)... will you get better performance versus the 2nd generation i7-3930k or better single processor.
__________________
-- LinkedIn Profile --
-- Blog --
-- Portfolio --

Last edited by tswalk : 12 December 2012 at 06:57 PM.
 
  12 December 2012
Oof, you're absolutely right. I think I will go with the i7-3930k. Any other hardware recommendations? Is that processor compatible with the rest of the $2500 build I linked earlier?
 
  12 December 2012
Hey man,

Any MB from this list would hit the spot. Just make sure its socket 2011.

http://www.newegg.com/Product/Produ...name=LGA%202011

That 850w PSU is probably overkill. Anything around 500w and in the $70 range should do fine.

Grab a SSD for sure if you've got the cash. Looks like a 120GB can be had for around $120 nowadays.

The stock cooler on the Intel 6 core should be fine to start with.

-AJ
__________________
 
  12 December 2012
the i7-3930k doesn't come with a stock cooler.. you'll need to buy an aftermarket one with it.
__________________
-- LinkedIn Profile --
-- Blog --
-- Portfolio --
 
  12 December 2012
Ouch, that sucks. It looks like it should come with one based on the size of the box. $600 and they cant throw in a $15 stock cooler to act as box filler.

It does come with a free Rubik's cube though, so your set in that department.
__________________
 
  12 December 2012
Originally Posted by AJ1: Ouch, that sucks. It looks like it should come with one based on the size of the box. $600 and they cant throw in a $15 stock cooler to act as box filler.

It does come with a free Rubik's cube though, so your set in that department.


lol.. ya no doubt.
__________________
-- LinkedIn Profile --
-- Blog --
-- Portfolio --
 
  12 December 2012
It doesn't come with a fan because people who are buying this cpu use or buy their own Fan. (And they dislike the included fan)
 
  12 December 2012
Thanks guys, for your help.

So I've done some shopping and here is my list so far:

Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155
http://www.amazon.com/gp/product/B0...d=ATVPDKIKX0DER

Asus LGA1155/Intel Z77/DDR3/Quad-CrossFireX /Quad-SLI/SATA3/USB3.0/A/2 GBE/ATX Motherboard P8Z77 WS
http://www.amazon.com/gp/product/B0...=A1AM293OQ2PVYW

CORSAIR Vengeance LP 32GB 240 pin DDR3 SDRAM 1600
http://www.newegg.com/Product/Produ...N82E16820233368

Prolimatech Genesis CPU Cooler + Rosewill 120mm fans x3
http://www.newegg.com/Product/Produ...N82E16835242007 w/ x3 http://www.newegg.com/Product/Produ...N82E16835200049


Do ya'll have suggestions for a graphics card and PSU? I don't know much about those components... I mean to do alot of 3d visualization work with this machine.
 
  12 December 2012
If you do lots of rendering, you really should go for the 3930k. A 250$ expense for an additional 2 cores (4 in HT) is money well invested imo, especially if you plan to keep it for more than a year. You could also save 100$ by going with an Asus P9X79 PRO mobo over the Intel. I have no idea how the Prolimatech heatsink performs, but the Noctua NHD14 reaps all honors in that department and wouldnt be much more expensive than the Prolimatech + those 3 fans. As for the PSU, something like the Corsair HX750 should be more than enough. For the gpu, that's the most subjective one. Depends on what software you use, if you do any gpu rendering, how many monitors you have etc.

Last edited by vlad : 12 December 2012 at 04:23 AM.
 
  12 December 2012
i agree with Vlad... the LGA 1155 series, while ok for general stuff... will not hold a candle to the LGA 2011 series i7's 2nd gens...

you would definitely be much better off with the 3930k investment.. it currently has the best price/performance out of all series.
__________________
-- LinkedIn Profile --
-- Blog --
-- Portfolio --
 
  12 December 2012
Yea, go for the LGA 2011 if you can afford it.

Are you planing on over clocking your system?

-AJ
__________________
 
Thread Closed share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 06:03 PM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.