Box modeling a Ford Focus ZX3

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

THREAD CLOSED
 
Thread Tools Search this Thread Display Modes
Old 03 March 2011   #1
Box modeling a Ford Focus ZX3

I have just recently gotten back into 3D and also made the switch to 3ds Max from Maya. I wanted to get my hands wet on a model of my car, a Ford Focus ZX3. I would welcome any advice on topology, edge flow, etc. I started modeling using the box technique from the side view using extrusions, adding loops, and moving vertices manually.

http://i255.photobucket.com/albums/...cusSideWire.jpg

Here is the blueprints I was working from...

http://i255.photobucket.com/albums/...d_focus_wrc.jpg
__________________
Be like water
 
Old 03 March 2011   #2
I think you are using too much detail too early. Only use the minimum amount of Geo that you need to define the shapes while smoothed.
 
Old 04 April 2011   #3
Talking Tips and Suggestions About Modeling a Car

Dear AppliedScience :

How are you ?

Overall, your model topology is not bad, but it has some stuff that you need to improve.

( a ) Topology : Your Topolygy Mesh having too much faces and lines at the " base mesh " stage. It was a little confusing with the faces/ lines that is too closed together and it was useless on your topology. Try to make it simple and clean in order to develop more detail in the following step.

( b ) Faces : Here's some suggestion about working pipeline that i want to share with you.( Base Mesh --- Detailing --- High Poly )

I always have a guideline in my modeling process. Try to maintain those faces and you will control yourself perfectly with this information.

Base Mesh ( around 500 to 2000 quad poly ), High Poly ( around 2000 to 5000 quad poly ), if you want to bake a normal map, your faces can reach ( around 5000 to 10,000 quad poly ) maybe more.( It was depend on your computer's RAM and running speed.

( c ) Modeling Hard Surface Skills --- Sometimes, you can extract some of the pieces of your car's part and define more detail on it. It will more effecient to process the whole modeling. Combine them when you finished all the part. ( Remember, try to keep clean and quads face on your model. )

Here's is my portfolio link to my Ferrari Modeling Artwork, I hope it will help you in your project.

http://www.youtube.com/user/ngeowyunsin

I hope my post will help you in your modeling.

Anyway, wish all the best to your car project !!! Good Luck, Man !!!
 
Old 04 April 2011   #4
Thanks! Giving me a poly count guideline will really help, and also the tip about extracting certain parts from the mesh to work on them individually. Good advice. Also, I really liked you car model as well!
__________________
Be like water
 
Old 04 April 2011   #5
Talking Your modeling should be awesome once you finished it.

Thanks,Man !!! I'm glad to know that my suggestion is helpful to your artwork
Anyway, have fun in your Car Modeling !!! Your modeling should be awesome once you finished it.
Good Luck !!!

Thanks for liking my Ferrari Enzo too !!!
 
Old 05 May 2011   #6
Your guidelines for the base mesh being 4000 poly's is extremely low. Why would he want to bake a map onto the car I don't see the point unless he is modelling for a game?

I just finished a Ford Fiesta in my Portfolio that has a base mesh of 150,000 polygons, 450,000 in total.

I recommend just going all out on it. And those blueprints wont help as the car is a different shape around the front. I would recommend going through and finding side front and back shots and compiling them for better results.

http://www.netcarshow.com/search.htm?q=focus
 
Old 05 May 2011   #7
Originally Posted by darkstryder360: Your guidelines for the base mesh being 4000 poly's is extremely low. Why would he want to bake a map onto the car I don't see the point unless he is modelling for a game?



Well, some times that much detail can be a drain on lesser PCs, like mine. Especially if your rendering.
 
Old 05 May 2011   #8
Thread automatically closed

This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.
__________________
CGTalk Policy/Legalities
Note that as CGTalk Members, you agree to the terms and conditions of using this website.
 
Thread Closed share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 10:36 PM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.