CGTalk > Software Specific Forums > The Foundry Modo
Login register
reply share thread « Previous Thread | Next Thread »  
 
Thread Tools Search this Thread Display Modes
Old 06-15-2014, 04:06 AM   #1
MikeJames
Veteran
 
MikeJames's Avatar
portfolio
Mike James
Designer
Mike James Media
Anchorage, USA
 
Join Date: Jul 2008
Posts: 78
"Modeling with MODO, Volume Six" available now!



Hi everybody!

After some delays, due to customer work, I have finally set the release date of “Modeling with MODO, Volume Six - Building High Resolution Models with Catmull-Clark Subdivision Surfaces” for the first week of July, 2014. Thanks to all of you who have been supportive and patient.

The largest part of the tutorial involves a variety of methods for modeling and exporting Catmull-Clark (Psubs) models, with and without edge-weighting. I cover a “pure” method, using my new Piaggio P180 (aircraft) as the example, By “pure”, I mean that the entire model is Psubs, and that it is all quad polygons. (No boolean cutters, frozen polys, etc..) This is an example of a complex, precision-scale modeling project, and could be considered “advanced”. Here's an example of the model in progress, to give you a feel for it. (For those of you who may have seen this aircraft on my site before, this is a completely scratch-rebuilt version, done in late 2013/early 2014.)



Then we go into other Psubs methods, based on projects I’ve done for customers who needed fewer polygons, and therefore allowed ngons. A variety of projects I did for a company in France last year pointed out how useful a method like this can be, creating MUCH less geometry, and still rendering fine. The models produced here are still accurate, scale-wise, but were produced much faster, and result in smaller file sizes.

Next, some discussion of MeshFusion, including examples of how I’m using it on a current project intended for manufacturing, prototyping parts for injection molding, using stereolithography. (“3D printing”) MeshFusion has been vital in that process.

Then, onto some discussion, with practical examples, of how to model parts for export to NURBS users, using the “Power SubD - NURBS” plug-in. I’ve recently been working with some Solidworks users, and have gotten very good results.

Finally, there will be the usual assortment of random tips and methods I’ve developed or discovered, as time goes by, using MODO. Modeling methods, material choices, rendering, rigging, and animation are all included in these. As always, I will include some MODO files for you to experiment with, including some files with rigging controls built in.

Although I show some new 801 features, none of them are pivotal to this tutorial. Users of 701, and even 601, will find them valid. More info, and pre-ordering link, at http://www.mikejamesmedia.com/mwm_06.html

Thanks again, everybody. Hope you enjoy this one!
__________________
Latest 3D Work - http://www.mikejamesmedia.com

Last edited by MikeJames : 07-20-2014 at 07:53 AM.
 
Old 07-02-2014, 10:44 AM   #2
MikeJames
Veteran
 
MikeJames's Avatar
portfolio
Mike James
Designer
Mike James Media
Anchorage, USA
 
Join Date: Jul 2008
Posts: 78
Pre-order discount extended

By request, the pre-order discount (10%) has been extended until Sunday, July 6th, 2014. Release date will be Monday, July 7th, 2014.

Enjoy!

More info at http://www.mikejamesmedia.com/mwm_06.html
__________________
Latest 3D Work - http://www.mikejamesmedia.com
 
Old 07-20-2014, 07:56 AM   #3
MikeJames
Veteran
 
MikeJames's Avatar
portfolio
Mike James
Designer
Mike James Media
Anchorage, USA
 
Join Date: Jul 2008
Posts: 78
Volume Six available now

"Modeling with MODO, Volume Six" was released on time, and is now available at http://www.mikejamesmedia.com/mwm_06.html

Thanks to all of you who pre-ordered, and for your feedback!
__________________
Latest 3D Work - http://www.mikejamesmedia.com
 
reply share thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright ©2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 05:53 PM.


Powered by vBulletin
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.