Machineflesh 3D Challenge Entry: Aaron Blaney

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

THREAD CLOSED
 
Thread Tools Search this Thread Display Modes
Old 03 March 2004   #1
Machineflesh 3D Challenge Entry: Aaron Blaney

Aaron Blaney has entered the Machineflesh 3D Challenge.
__________________
Rubber Monkey Chewtoy
| My Concept Car | My WIP Hover Racer Thingy |
 
Old 03 March 2004   #2
I could not pass this one up. I've had a concept kicking around that's perfect for this. I'll sketch out a concept tomorrow at work.

Good luck to all of you guys and gals!
__________________
Rubber Monkey Chewtoy
| My Concept Car | My WIP Hover Racer Thingy |

Last edited by RekAge : 03 March 2004 at 05:02 PM.
 
Old 03 March 2004   #3
Concept Sketch: Prelim Concept sketch



I've had this idea kicking around for a few years. This challenge is perfect for me to finally model it.

My idea is to step away from the modern vision of cybernetics and go old fashion. This character is a blacksmith that is augmented with 1800 era technology (the style has been referred to as Steampunk). Steam powered pistons are what gives this gentleman the strength to create the massive machines that his job requires. I really can't wait to get this guy finished.

There will be more concepts coming soon, with details of all the mechanics and interesting bits
__________________
Rubber Monkey Chewtoy
| My Concept Car | My WIP Hover Racer Thingy |

Last edited by RekAge : 03 March 2004 at 09:04 PM.
 
Old 03 March 2004   #4
Thumbs down

This looks good
 
Old 03 March 2004   #5
Steampunk!
What a great idea - I'll be watching this one

What artists, if any, influenced this style? I'd love to check them out.
 
Old 03 March 2004   #6
My influence at the time of drawing was Gauss, a modeller for quake 3. My art style doesn't suit the steampunk look as much as his does.
This is the drawing that started a whole, steampunk craze over on the polycount message boards:Steam Devil
You can find his website here

But his work was only a stepping stone for my design, and I would like to hope that my skills have increased since I first came up with this concept
__________________
Rubber Monkey Chewtoy
| My Concept Car | My WIP Hover Racer Thingy |
 
Old 03 March 2004   #7
Hi everyone,

It looks good, surely it is gonna be a great model. Good theme.
Skill is very important, but it is important not to get crazy to much with the technical part. What really matters is the final result and in art everything is in the details.Keep it going as soon as posible This is the way you get the most fun.
Skill comes alone with practice, there was a time that I was over obsesive with and I decide not to thing so much about it.It is better to practice, practice and practice...


Good Luck
 
Old 04 April 2004   #8
Yeah, cool sketch you have there. I'm a big fan of the steampunk style. Love the character and the pose.

slightly off topic, but did you know the dude that did Akira is releasing a new Anime called SteamBoy, set in London circa 1800's. Looks crazy, heaps of steam clouds and 3D effects.

There is a trailer for it here:

Steamboy Trailer

Anyway, subscribing to this one. Thanks for your comments on my own entry.

Looking forward to seeing more.
__________________
My MachineFlesh Entry
 
Old 04 April 2004   #9
Concept Sketch: Steamengine concept



Simple sketch, I had to get something down on paper so I could finalize this aspect of the design. This engine is what powers all the pistons around the body. you can see where I have 6 leads coming off the sides, these are the hoses that attach to each piston.

The engine is attached to the shoulder blades by hinges, keeping most of the heat away from the back, and still allowing most movement for the character.
__________________
Rubber Monkey Chewtoy
| My Concept Car | My WIP Hover Racer Thingy |
 
Old 04 April 2004   #10
Concept Sketch: Piston layout



Was trying to figure out a more efficient layout of the pistons to give increass mobility to the character. Also in the sketch is an idea for the hydraulic's connect to the engine.
__________________
Rubber Monkey Chewtoy
| My Concept Car | My WIP Hover Racer Thingy |
 
Old 04 April 2004   #11
Concept Sketch: Pose thumbnail



A little thumbnail sketch of what would be the final pose. Nothing really special, just wanted to share it.
__________________
Rubber Monkey Chewtoy
| My Concept Car | My WIP Hover Racer Thingy |
 
Old 01 January 2006   #12
Thread automatically closed

This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.
__________________
CGTalk Policy/Legalities
Note that as CGTalk Members, you agree to the terms and conditions of using this website.
 
  share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright 2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 07:14 AM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.