Wishlist for Painter

Become a member of the CGSociety

Connect, Share, and Learn with our Large Growing CG Art Community. It's Free!

REPLY TO THREAD
 
Thread Tools Search this Thread Display Modes
  02 February 2009
I'm sorry for repeating this from another thread, but this thread is actually a better place for this...

I still have my fingers crossed on Painter XI color mixing...

I've been asking since at least 2005 for Painter to drop its RGB color mixing in favor of some more realistic multispectral pigment mixing.

...So Painter, if you are listening -- it's time.

By coincidence, I even came across some researchers today who were doing it back then. Interesting stuff.

http://gamma.cs.unc.edu/impasto/
 
  02 February 2009
The interesting thing is, the younger generation who started on digital and never painted with real paint have no disconnect--they just use what they're given. I wonder if one mixing method is inherently more reliable/effective than the other, if that's the only method a person knows?
 
  02 February 2009
Quote: The interesting thing is, the younger generation who started on digital and never painted with real paint have no disconnect--they just use what they're given. I wonder if one mixing method is inherently more reliable/effective than the other, if that's the only method a person knows?


That's probably true.

If one knows no other method, then they have no knowledge of the other alternatives, and in turn will make their method work, due to that lack of knowledge.. if that makes any sense.

I started digitally and through programs like Painter I began to use traditional methods, like I did as a child.. throwing paint at a canvas, and thinking nothing of it.
__________________
shap00pi
 
  06 June 2009
I want to be able to change the orientation of captured dabs with brush strokes. Never understood why we can't. With captured dabs, if you go to Angle, turn down squeeze to lower than 100% and enable expression, the strokes still look the same. You can change the angle manually, but that is not practical.
 
  06 June 2009
Thumbs up painter

I known about mixing in painter.There is a file that have a place in colorsets that you can loaded in your mixer and that are like mine artistcolors
ROWS 2
COLS 12
WIDTH 18
TEXTHEIGHT 0
SPACING 1
R:115, G:074, B:018 Raw Umber
R:128, G:070, B:027 Russet
R:112, G:066, B:020 Sepia
R:205, G:141, B:066 Raw Sienna
R:185, G:075, B:048 Burnt Sienna
R:137, G:079, B:055 Brown Oxyde
R:037, G:025, B:029 Vandyke Brown
R:249, G:244, B:006 Cadmium Lemon
R:244, G:237, B:001 Yellow
R:241, G:167, B:016 Cadmium Yellow
R:231, G:129, B:053 Cadmium Orange
R:225, G:036, B:066 Cadmium Red
R:255, G:069, B:000 Red orange
R:231, G:081, B:110 Rose Madder
R:166, G:036, B:046 Alzarin Crimson
R:208, G:042, B:064 Parmanent Alzarin Crimson
R:135, G:206, B:235 SkyBlue
R:089, G:179, B:208 Cerulean Blue
R:001, G:118, B:188 Cobalt blue
R:069, G:057, B:140 Deep Cobalt Blue
R:053, G:079, B:151 French Ultramarin
R:047, G:058, B:127 Prussian Blue
R:008, G:014, B:019 Indigo
R:028, G:087, B:097 Phthalo blue
R:119, G:221, B:119 Pastel Green
R:002, G:168, B:119 Viridian
R:000, G:128, B:000 Office Green
R:128, G:128, B:000 Olive
R:154, G:185, B:115 Olive Light
R:007, G:142, B:035 Green
R:124, G:252, B:000 Lawn Green
R:255, G:243, B:171 Light Naples Yellow
R:251, G:219, B:132 Naples Yellow
R:228, G:155, B:015 Gamboge

that are in a text file and save as c:\program files\corel\painterIX\colorsets\artist colors
and you can't used as watercolorpaint or other paint. Your mixer work with this and you can it mixed as a traditional paint.

i hope that i bring you up the right way,as tradional artist
 
  01 January 2010
How about a pencil option that actually looks like a sketch? Maybe its just me but I cant get it to work that way

DksDestiny
__________________
I'm no angel, but I've spread my wings a bit! (by Mae West)
 
  01 January 2010
Originally Posted by DKsDestiny: How about a pencil option that actually looks like a sketch? Maybe its just me but I cant get it to work that way

DksDestiny

IMHO current Painter pencils are excellent .. And these new Real Pencils are great. Of course you can have your particular idea of a sketchy pencil but tweaking any of the existent ones should help for your needs.
Regards
 
  01 January 2010
Originally Posted by Heozart: I want to be able to change the orientation of captured dabs with brush strokes. Never understood why we can't. With captured dabs, if you go to Angle, turn down squeeze to lower than 100% and enable expression, the strokes still look the same. You can change the angle manually, but that is not practical.


Here is what you need;

In the Brush Controls > Angle palette;

Squeeze: 99 percent or less

Angle: Whatever you want

(Angle) Expression: Try Direction, Bearing or Random (or Rotation if you have the 6D Art Pen/ Art Marker).

Angle Range: Say 30 up to a maximum of 360 degrees for the full 360 degree rotation. If this is set to 0 degrees, then there will be no rotation in your dab stroke.

Angle Step: Typically 5 to 12 degrees. Angle Step values of 180 degrees and above can prevent angle rotation, irrespective of Angle Range and other Angle settings.

It sounds like you could have had your Angle Range set too low, and/or the Angle Step value too high.

David
__________________
Jitterbrush.com
 
  03 March 2010
Question

Why isn't there a complete glossary of all terms used in the Toolbar and Properties bar and the Brush Controls, in the Help?
Or somewhere.
For instance: Feature Size, Boost, Squeeze and some others.
Can not find an explanation of Feature Size anywhere online, what it actually does.
Same with Boost.
What does Opacity actually mean in terms of pixels?
Does 50% mean that half of the underlying pixels are allowed to replace overlying pixels?
Stochastically or in a specific pattern of some kind?
Or isn't that even the method?
 
  04 April 2010
First of all, let me say how much l love painter and how much I would love it if I didn't have to shift between the two programs so often.

I'm sure most are addressed already, but in that case, just see it as an added voice.

It's also very much possible that these things already exist, but I simply don't know how to do it.


- The opacity could do with improvement especially in the low percentages.
- I'd like the option of an angle shader brush
- The ability to load (some) brushes (like the angled shader) with more than one colour
- Dodge and burn. Don't use it much, but it's not colour-true in painter
- The ability to resize the layer menu
 
  04 April 2010
what do you mean by "angle shader brush"?

you can load multiple colours with painter since ver. IX was released, it's the second eye-dropper icon in color mixer pallete (cmd+2/ctrl+2)
artists oils and realbristle brushes are showing the most pronounced colour mixing effect afaik.

you can use glow brush in FX category as photoshop's color dodge replacement, works fine.
I'm not sure about color burn in painter though.

you can also resize the layers palette -
http://painterfactory.com/forums/t/...px?PageIndex=17

Last edited by msbunbury : 04 April 2010 at 03:28 PM.
 
  04 April 2010
- Brush blending modes (normal,darken,multiply,color,color dodge etc).
Something like shift+r.click in Photoshop.
These speed things up,although I don't know how this would fit with Painter's engine.
- Unlock-able canvas (base layer)
- Cleaner and smarter UI
- Better performance
 
  04 April 2010
Originally Posted by neso: - Brush blending modes (normal,darken,multiply,color,color dodge etc).
Something like shift+r.click in Photoshop.
These speed things up,although I don't know how this would fit with Painter's engine.
- Unlock-able canvas (base layer)


This tutorial answers your questions about the Painter Canvas:

The Painter Canvas, What Can be Done with it, and
How to Lift it to a Layer


Quote: - Cleaner and smarter UI
- Better performance



Jinny

#
 
  08 August 2010
My Corel Painter 12 Wish List.

I would like to see an ELLIPSE and RULER tool ( like Sketchbook Pro 2010 has ). The symmetry tools in Sketchbook Pro 2010 is also very useful. With the ELLIPSE and RULER tool you simply position the ruler or ellipse anywhere on the screen and then proceed to draw following the contour of the ruler or ellipse. This gives us nice straight and curved lines.

ArtRage Studio Pro does this even better with "Stencils" of a ruler, a french curve, a square, a rounded square, etc. You use them the same way you would on a drawing table.
 
  08 August 2010
if you're familiar with creating vector shapes, you can make your own curves and align your brush movement to them.
 
reply share thread



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
CGSociety
Society of Digital Artists
www.cgsociety.org

Powered by vBulletin
Copyright ©2000 - 2006,
Jelsoft Enterprises Ltd.
Minimize Ads
Forum Jump
Miscellaneous

All times are GMT. The time now is 09:47 AM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.