View Full Version : Master and Servant 3D Entry: Darko Markovic

03-22-2005, 09:37 AM
Darko Markovic has entered the Master and Servant 3D.

Challenge Page (

Latest Update: Lighting: lights (

thnx for kind words everyone... ia m very busy and i really don`t have time even to put wall and floor :( ... i think i will find some time to texture drago... this is lighting... 3 lights from top ( blue - spot lights) one main sun ( direct ) from down one area light ( yellow) and from all for sides area lights ( yellow)....

this is final scene just need to set up pose little bit of princess and to get drago in scene ;)

03-22-2005, 09:42 AM
Well , another challenge , i hope that i will be better in this one :) gl all

03-22-2005, 10:25 AM
hi there my friend! I'm very happy to see you here again! you know, this time we will win:twisted: :bounce:

good luck! show us some creazy ideas!

03-22-2005, 10:33 AM
Hey hey... all the young good guys are here... hahahahahahahahahaha :thumbsup:

03-22-2005, 10:58 AM
Good luck.

03-22-2005, 01:19 PM
Hey Darko,
Good to see you back and good luck .

03-22-2005, 01:30 PM
Hi my friend!!! :bounce:
It's nice to see you in this new challenge, good luck!!
I'm sure, you'll do a very good work!!
I'm already suscribe to this thread!!!

Let's go!!! :wip:

03-22-2005, 01:38 PM
Good you're in too. :) Go go go, show us what you're made of!!
best luck and have fun. and now rock it rough!!!:buttrock: :beer: :thumbsup:

03-22-2005, 03:25 PM
Dude....Enough said, let's go....

03-22-2005, 05:59 PM
• Yeah! welcome in Darko! ready for another party? Have fun my friend and good luck!

03-22-2005, 06:28 PM
Good luck ;)

03-22-2005, 06:30 PM
good luck to you!

03-22-2005, 07:45 PM
ooo.... what a nice Welcome my friends! i am very pleased to know u all ! :D , thnx for very kind words good luck everyone!

03-22-2005, 07:50 PM
yeah you said it, you will be better ! that's really fun to see all this ppl around, good luck and have fun !

03-22-2005, 08:52 PM
darko........Go to it strong young man.......Nice to see you back in action,I wish you good luck and lots of fun........:arteest:

03-22-2005, 09:16 PM
Good luck Darko! Looking forward to see you finish this in style :thumbsup:

03-24-2005, 10:33 AM (

Ok , i never had patience to draw something 2d on computer... so i just do SPLASH , SPLASh ... and i have sketch :D
anyway this is my idea

Elf Princess and her new friend ( dragon ) :)

i always wanted to draw elf or dragon... so now i will combine this two and have oneimage :D... going to do some rough sketches on paper and then i will start modeling later ;) , hope that i finish this on time :)

03-24-2005, 02:22 PM
Hi there my friend! Difficult idea I must say. I hope you will manage to do it on time!
I can't wait to see the dragon in 3d:)
good luck!

03-24-2005, 10:46 PM (

ok started modeling princess`s head... this is basic shape i will add more detail on it ... later as the time goes:D

and my mates , i will try to visit all your treads as much as i can... but at the moment i am really busy , and i am trying (as much as i am possible ) to look through your treads... because the last competition ... hm let`s say had a little effect on my life :D

03-24-2005, 10:56 PM
nice start man!! hehe how is the model?? heheeh

03-24-2005, 11:13 PM
• Yeah! already on the fastlane uh? Keep going Darko! looking great :bounce:

03-24-2005, 11:18 PM
Nice start on the model. I think that the eyes should be closer to each other. I see that it's ok with the picture, but if look only at the model it seems strange a bit. But maybe it's just an impression because the model is not finished.

Good luck!

03-25-2005, 12:00 AM
On the road again eh markovicd? :) ....arturro is right there should be roughly the size of an eye between the eyes then again there are differences....heheh anyway its yet too early to comment ... nice work :D !

03-25-2005, 01:32 AM
Hi marko, model in looking great! nice loop !

03-25-2005, 09:14 AM
Man you've started... Nice start on the head, but I think the forehead's a bit low right now. Maybe it's because the refernce you used has been cropped off at the top. And the eyes should have about one eye spacing in between with one eye spacing at the sides as well. Might be because the girl's hair is covering the sides of her face.

Keep going!

03-25-2005, 09:45 AM
D-3 thnx man :D , she is good :D ahahah :P

Climax a boy gotta do , what he has got to do :D , thnx :D

arturro u are totaly righ arturro... i need to move eyes to the lift little bit :) , i didn`t see that!
and yes it is strange because it has to little faces... ( i am following topology so it will be clean when i finisH) later i will add more... :D

yunisirees dar-mar is on the road baby shake that ass ! :D

monsitj thnx monsi! :D
keetmun i don`t know i will need to look at the model... will post later new update :D

thnx guys! :)

03-25-2005, 08:26 PM (

fixed some stuff , and started modeling the nose , i will add more loops after ... i wanna clean mesh! :D

03-25-2005, 09:32 PM
beautiful so far man:thumbsup:

03-25-2005, 09:45 PM (

and we are going , going... stoping now going to the party :D hm... time 10:49pm i am preparing for the party... it is time to go :D , i was careful with loops hope they are ok ? :D , i will add more detail tommorow and then we go on body ... to breast ( she will have dress ) :D

see ya all

03-25-2005, 09:50 PM
profile looks great my friend! But something wrong is with the front view. I think that you need more defined lines of the face there. Now it's too flat there, I mean too simple. But very nice progress! Waiting for more.. I hope to show some modeling soon as well:)
Keep it up Darko!

03-25-2005, 09:53 PM
Mr Micro26hihihi thnx man :D!

arturro u old cat! :D read my post`s! :D it will be defined later ... now i am dealing with topology :) ... there will be plenty more loops , egdes and so on :D...

03-25-2005, 10:18 PM
yo dood everything goin all smooth n stuff ?

03-25-2005, 10:33 PM
Mr Micro26hihihi thnx man :D!

arturro u old cat! :D read my post`s! :D it will be defined later ... now i am dealing with topology :) ... there will be plenty more loops , egdes and so on :D...
:bounce: sorry, I just dropped quickly to see some updates:) will be more careful in the future:thumbsup:
so now waiting for those details:buttrock:

03-25-2005, 10:56 PM
hm... moraces jos dosta da sredis glavu. Nos i usta pogotovu i neko je vec napisao da priblizis oci malo.

Pozdrav i srecno ;)

p.s. (others) Sorry because I wrote this on Serbian.

03-26-2005, 01:56 AM
Hey Darko.

Sorry took me long to answer, cuz its almost impossible to keep update with all entries. As always, i try to give a few constructive inputs i hope.
some already mentioned, the face looks a bit strange in fronview, ther'sa simple explainatin for that. your sideview reference looks up to the sky. your front looks straight forwards.

it helps to adjust the main axis from sideview to fit exatly to the referenceheigths. an easy way to have controll over that is to draw some circle splines from topview wich you pull from frontview then into the referencelevels, top of head, hairbeginning, browbows eyes, nosetip, mouth, chin. circles will make sure the reference fits. if you need the references, make sure you place them the best fitting as possible. front view nees to be rotated cw a bit, sideview cww. make sure both references exactly have the same scale. hope that helps.

now the model: what i can tell is her head is not wide enopugh in the upper part yet, the widest part of a head is above the ears. means, back head builds almost a sphere (a bit flattened in the side) and is the widest part (except ears of course) of a skull.

nosewings could use an extra edgeloop to define the volume, eventually, make the "bridge" between the noseholes less wide too.

the chin (may come from not ajusted horizontal middleline) is too wide, the jawbone in exchange yould be a bit wider.

Eyes in general will need 2 extra edgeloops for a precise definition of the volumes, i'd pay them much attention because eyes make a huge part of human expression.

as alredy said you deal with the topology, i know. never the less, make susre distribution is well planed for not having messy parts at the end, cuz you have to add many aditional edges afterwards.

Hope thes little sugestions help you. Keep up the good work, i'll be checkin back :)
and for now, Dobru Noc

03-26-2005, 02:17 AM
heeey marko seems like a lot of things r up.... nice concept and modleing so far. The loop to me seems okay, but u should more loops in the nose area. It needs more refining. The eye's shape seems off. Make it pointed in both sides. Just to let you know be careful around the jawbone. If u want ur character to look good, a good jaw bone can take it a ling way. Another thing, the eyes r too high on the face or the heard is too short.... u might want to recheck that part. anywas i'll b back for more l8r... till then keep updating... ur goin gr8 :thumbsup: good luck mate

03-26-2005, 11:36 AM
Squibbit you dude! everything is fine for now! where are u on 3d challenge ? :D this time just 2d ?:)

heheh ok :D , detail will come probably today! not all but some :)

Abishai_ chitaj prethodne postove ;) , ovo je samo obichna forma glave kasnije cu dodati josh edgova...


huh ... some report here hey! :) , thnx very much about size of the parts of head... but loops as i am saying to everyone! this is basic shaepe there will be added more loops just w8 ! there will be 4 more around eyes , 4 on lips . and so on ;) try to fix everything today!

overcontrast hey hey hey don`t push me around! :D ahaha kidding ... hey new challenge ! hm... yes now i saw jawbone is to sharp... i will fix everything...

thnx for comments guys! :D

03-26-2005, 12:44 PM
The some good advice the Angel gave you bro. My advice is looking up some anatomy books, drawing out your proportions. That'll improve your work a lot! My wires are coming up real soon, just gimme a while.

Rock on bro...

03-26-2005, 01:18 PM
haha found your thread *subscribe* :applause: and good luck !!

Sorry marko but I'm not really the better person to talk about figure modelling, but what first angel tells you is really a excellent input and andvice !

Congrats for the actual modelling session and keep it hard !


03-26-2005, 05:28 PM
jddog yes yes angel is the man ! :D , thnx bro! :D

keetmun waaaaaaaaaittttttttttttttt to add more loops and then we talk about anatomy! :D ah now u need more time ... there is no TIME! :D gimme the wires! :))

i am lazzy to work these days... maybe i work little more on head... but i don`t promiss anything :D

03-27-2005, 07:21 PM
keep on, you fix it, no wories, you get it, see you and :thumbsup: :thumbsup:

03-28-2005, 10:28 AM (

ok another update... i didn`t add more loops still ... i will add them later... did some refiniening on mouth ... and added the neck... today i will refine all the things that angel said... and then add more loops end finish this head... i am going for semi-realistic look ;)

03-28-2005, 11:54 AM
Looking quite good darko........I think your coming with it....some great advice here.......Like the semi realistic look idea.......Just keep hammering away at it.....I know you will.......I'll be watching for more darko.......The advice here is just wonderful......See you soon....:thumbsup:

03-28-2005, 03:23 PM
Hi Markovicd, your have a nice concept, You just need to tweak your model again & again till the time it reaches to realism. Well my advice is use edge looping method for modeling.
Waiting for more updates, Keep rocking:thumbsup:

03-29-2005, 01:50 PM (

heya all! :D , i started adding loops added some chin loops and mouth... still didn`t add loops on eyes ;) ,i will tonight ...
c&c are very welcome ... critiques more! :D

03-29-2005, 01:58 PM
I really like what are you doing here... especially for the head ... argh :argh: I had to do a head me too... actually are the lips that looks a little bit strange... still a really good work Darko :thumbsup:

03-29-2005, 03:06 PM

adjust the skull a bit more.. the eyes need to sit halfway in the head, currently it's sitting to high, try pulling the skull up a bit more..

hope it helps

03-29-2005, 04:14 PM
Hi Darko, nice work here!!

Concept can be cool, just think about your finale view.
The modeling is really cool, you are really fast!! :bounce:
I'm agree with jddog for the mouth... perhaps too big..:shrug:
Anyway good work!!
I'm waiting for update my friend!

Keep it up!!:beer:

03-29-2005, 05:10 PM
Squibbit you dude! everything is fine for now! where are u on 3d challenge ? :D this time just 2d ?:)

just 2D this time dude , don't want to get too busy :)

03-29-2005, 07:50 PM
As long as your sketchs make sense to you then thats good enough. Unless your dealing with a client or something. When is the last time you saw a photographer draw out his composition before photographing it? Some do, but being an old BxW studio photographer most of the ideas and compositions are handled directly through the lens. Composing and constructing in a 3D program I find is a similar experience. Keep up the good work.

03-30-2005, 06:41 PM
Coming along well Darko. I can see that as you add more loops you are getting it much closer to your idea in the sketch. keep at it! :wip:

03-30-2005, 08:45 PM (

i did what u said... eyes are on middle ( almost ) ... and now comes the elf ear in action ... hope u like this quick test :P with skin and eyes

03-31-2005, 05:29 AM
Yup it's getting better and better! I get this feeling you're gonna make her really hot ehh? Dark Mark strikes again....

:buttrock: :twisted:

03-31-2005, 12:06 PM
heheh keet :D dark mark is back :D she has to be sexy! :D

03-31-2005, 01:03 PM
HI there chief! slowly, slowly, but forward:) I think that some extra motivation for us would be a good idea:beer: I'm waiting for more here!

ps. How much cartoony style do you want?

THE Wizard
03-31-2005, 01:30 PM
Nice idea, thou a little difficult... A da bre ovde moze naski...:) E ideja je ok, ali mislim da ces da se namucis da izrazis faijalnu ekspresiju(al sam srocio) elficu. U svakom skucaju Navijam za Nase, a ti si nas pa izvoli napravi Dar-Mar :)

:twisted: my master & servant 2D (

04-01-2005, 12:59 AM
Still progressing nicely. Keep refining..

04-01-2005, 06:33 PM
Is this some kind of alien princess? :p

Keep up good work! Aj... :thumbsup:

04-01-2005, 10:23 PM
Hi Darko,

Sorry 4 the the late quote, but i just found your thread.

Loooooking very good!! :bounce: :bounce: keep on modeling!

I stay tuned :)

04-03-2005, 06:35 PM (

final head refiniening.. i think this is it with head ... need to add ear... and then i model cloth...

mates have any idea what should i refine ?

04-03-2005, 06:56 PM
good going but i agre whith versiden ,quote,
adjust the skull a bit more.. the eyes need to sit halfway in the head, currently it's sitting to high, try pulling the skull up a bit more..
see you and i now you fix it in a sec or two :thumbsup: :thumbsup:

04-03-2005, 06:58 PM
Hey !

I think you could make some little improvements to the mesh by erasing that crease splitting the face in two. The area around the nostrils is too thin (you could get the two holes closer to each other, that would solve the problem). Good beginning !

Good luck too !

04-03-2005, 08:31 PM
You need to fix lips and eyes (za sada). Eyes needs to be closer.. Change that.

E sad na nasem. Usne napravi uze i sredi im krajeve. Nos... kao da je slomljen, sredi taj deo i oci sto sam vec i napisao, priblizi malo. Srecno :thumbsup:

Good luck :)

04-06-2005, 10:47 AM (

ok , lips are smaller nose is more defined... some cv-s moved... i think this is it with head... going to model her hand and dress... then comes dragon ;)

04-06-2005, 06:42 PM
is that bad ? :(

04-06-2005, 06:55 PM
hey dude, good start but the eyes look alittle to far back, which is making the face look out of proportion

04-06-2005, 07:16 PM
Hey Darko, i think it's better than the previous ones but it need a bit more work... the eyes are too spaced yes, you should also replace them correctly, actually in human proportions they're often in the middle of the face, so i'd suggest you to put them more down and reduce the size of the nose (make it more cuttie...) ...You could also work from a reference to get correct proportions, it really helps ...then you make your own details...

I'm looking forward to your update, good luck and keep it up !:wip:

04-06-2005, 07:37 PM
thnx guys... i think that eyes that are not on middle will kill me... i am adjusting them everday

04-07-2005, 02:40 AM
It's better now. But do this what others say (move eyes and nose need to be smaller).

04-07-2005, 08:09 AM
Looking good marko. I think the center piece of flesh of the nostril (forgot the name) comes down a bit too much; the cetner of the forehead looks a bit flat; and I think the lips could use a little bit of volume. Also, it seems like the eyue lid and the eyebrow are just one think, and the eyeball isnt affecting that space. Keep it up, and hope to see more updates soon.

04-07-2005, 08:17 AM
I agree with the others marko.....take some more time and refine her features.....This will pay off in the end....The Dragon can should see this first to the end......The idea here is to get better and learn and finish properly....looks Ok now,but needs that final touch and some tweaks......Just as the others mentioned.....Now common young can finish this just the right way....I know you can.......refine here a touch more.......Best to you.....:arteest:

04-07-2005, 08:21 AM
hi there my freind! Nice work. I can add to the previous comments thta you could try moving her jaw back a bit. I think that it may add more femininity and inosence to her.

Waiting for you next move... especially for the dragon:twisted:

04-08-2005, 09:38 AM (

i am getting nervous with this head... i wanna model hand and dress ! aaaaa! :(

i have done some things u said...

what do u think?

04-08-2005, 07:12 PM
ok... because of no comment`s i guess head is ok now... modeling tommorow dress and jewelary... and then comes dragon... he will be in mushu style from Mulan :D , u know who he is ? :D

04-08-2005, 09:27 PM
I think the lips could be more shapely, they look like straight lines almost. And it still looks like the eye isn't affecting the shap of the sking over the eye socket. So your going for the chinese/japanese serpantine dragon huh? Can't wait.

04-09-2005, 10:28 AM
ok mate i will fix that ... with eyes i forgot! :( ... and yes dragon is going to be chines look ... he is going to be funny little fellow :D

04-17-2005, 02:26 PM (

long time no see mates :( , guess everybody forgot about me :(...
i didnt`t have time to work on my project
anyway ... there have been minnor changes... i.e there is no more princess there is elf - archer :D , but dragon stays :D ... there is new sketch i will post it later... and then comes story....
i hope i will have time to finish bye ;)

04-18-2005, 10:48 AM
mates i am busy at this time... need to go to school , i `ll post some update tonight ... se ya all :)

04-18-2005, 11:01 AM
:eek: + :applause: hey you are doing a wondeful work here marko !!! Congrats...


04-18-2005, 11:34 AM (

bow... update ..

04-18-2005, 05:57 PM
hm... wherea re my maaates :(

btw thnx jddog :)!

04-18-2005, 06:11 PM
Hey Darko, great progress here mate!
the datails really adds a lot to the character!
Keep it up man!!:thumbsup:

04-18-2005, 10:17 PM
Looks pretty good so far. Umm, how about making the archer just a normal human to satisfy the "one human" rule (unles sthey accept elves as humans). Nice bow desing btw:thumbsup: .

04-19-2005, 09:56 AM
hey thnx mates! :D thnx for this feedback it means very much to me ! ...

04-19-2005, 10:09 AM
Nice modeling, Darko! Looking foward to see more, good luck! :thumbsup:

04-19-2005, 11:31 AM
hm, interesantan lik.
Svidja mi se odeca :)

u cemu radis?

04-20-2005, 10:42 AM (

ok added some stuff... i think she is finished... just need sword... and now i think i wiill model market guy... ( blah u don`t know who he is because i didn`t post sketch and then dragon.. hope i will have time for everything buy ;)

04-20-2005, 06:33 PM
heheh ... i must say something now is 8:30 pm 20 april.... in hm...30... 1h ...yes 3h and 30 min i will be 18 ... :D at last... i am 18 years old no one can stop me!

love ya all mates! :D

04-20-2005, 07:08 PM
So, Happy Birthday Mr marcovicd !
Let the mighty gods of 3D (and metal, my personal blessing, sorry :D) be with you !


04-20-2005, 07:29 PM
Happy Birthday to you Darko... 18 is yet young... well, that's a really good thing you know... you have your life front of you... then, I wish you all the better thing for your entire life my friend...
...good job, good 3d, good girls and so... and don't forget the party :bounce: :bounce: :bounce:

04-20-2005, 09:32 PM
hehhehe thnx mates! :D

04-20-2005, 10:38 PM
it is official.. 12:30 ;) bye all

04-20-2005, 10:48 PM
hey... happy birthday :bounce:
those details really give life to your model, go on go on:thumbsup:

04-21-2005, 11:22 AM (

mdoeling enviorment... medival market + salesman :) he will be just coat + red glowing eyes... mistic ! :D

18......! birthday yeah... now i have t ogo to school and have fun :D

04-23-2005, 07:50 PM (

hey all , i had some time to texture her ;) i still need to texture face and eyes... there is so little time + no time :( , there will be holiday here from 27april 3may so i will work like a hell to finish this... i hope i will ;) bye all

04-24-2005, 05:29 PM (

i think she is finished... now going on dragon modeling ...

04-25-2005, 12:11 PM
any critz? no ?

04-25-2005, 11:28 PM
HI marko,,ure going all along pal,great.
I kinda wonder how ure going to put this together in the final shot,,,keep it up..
Pozdrav iz kisne Rijeke.. :thumbsup:

04-26-2005, 12:48 AM
Jel joj je baba plela ovu suknju i dzemperic? :p :D

Keep up good work!

04-26-2005, 09:41 AM
The character looks good man but it needs some little work about pose and anatomy, the left arm doesn't look natural now, she looks walking so you should put this arm behind her, the legs need to be at a different position also, you shold check for some walk cycle reference and you'll see what i mean...just an idea to get her blanced correctly...

You should rework a bit on left hand also, the thumb looks too small for this hand, make it more longer and thicker.

Hope this advice will help you, it should bring your character more alive and natural...

Looking forward to your dragon modeling, keep it up :arteest:

04-26-2005, 11:09 AM
A I Rthnx mate...
pozdrav iz beograda:)

Abishai_ e shabane :D

cipher hm yes mate i totaly agree , i need to bend her foot little more... i forgot about that ;)
and yes she is walking...

thnx mate ;):thumbsup:

04-26-2005, 11:39 AM
hey marko nice to c u posting updates again... ur character is not looking bad, but as cipher said, it need some work to look good, actually give her more definition, its kinda hard to get if its a male or a female (no offence) but i'm sure if u give ur affort ur gonna fly with dazling color... s keep up the hard works and good luck :thumbsup:

04-26-2005, 03:48 PM
• Cool Darko!, long time no see u and you have made lot of progress, great for you, the girl look very good, minor details like hands, but i know it is still wip, maybe make her's female atributtes more remarkable :thumbsup:, keep the good work!

04-26-2005, 05:57 PM
Looks good Marko. Looks like the chest of her chest needs to be a bit concaves to define the breast; also her obliques and hips could have more of a dramatic transition between them. The hands look a bit wierd, maybe work on those a bit too. Keep it up:thumbsup: .

04-27-2005, 09:46 AM
Dude...that is some improvement....keep at it and you'll become too frickin' good!

Cheers bro

04-28-2005, 07:23 PM
overcontrast thnx mate i will fix that what cipher and u said...! work hard but progress good ;)
thnx !

Climax long time no see mate! :D , well hm... i will make her some teets... :) to make her more femine , thnx mate! :)

ace4016 i will make new shirt ;) , and hand`s i will need to rigg them little more ... ;)thnx mate! :)

keetmun i hope so mate hope so... ;)

there is no time to finish this comp ( or maybe there is!?:) ) if i don`t finish it for comp.. i will finish it later... practice is what i need and some models for portofolio because i am 18 now i can look for job ;)

04-28-2005, 07:26 PM (

well... this is sketch for dragon i want to make him silly + fat + clamsy... his name is drago... ;)
( sorry for bad quality of image... it was taken by camera not with scener :( )

04-29-2005, 01:54 PM (

Modeling of Drago... head for now...

04-29-2005, 03:56 PM
looking great.:thumbsup: i love ur dragon.:)

04-29-2005, 04:54 PM
thnx mate! :) i hope i will finish him in 2 days time ( model , texture , rigg ) ;)

04-29-2005, 05:07 PM
Interesantna zivotinjica :)
Dakic, ako ima negde u BG da se kupe... bas mi treba jedan za kucnog ljubimca :)
Bas je sladak na onoj slici gore

04-29-2005, 07:17 PM (


04-29-2005, 08:04 PM
atra drao nije na prodaju ahahah :P he works for me! :D

04-30-2005, 09:06 AM
That's look really cool :applause: congtas markovicd ... :wip:

04-30-2005, 02:01 PM (

modeling of drago... arms need more work and he needs wings! :) hope he is funny enough!

hm... i need to think to texture him

04-30-2005, 03:07 PM
:D I really like it :thumbsup:

04-30-2005, 04:37 PM (

thnx jdd! i am very pleased because u like him ;) , we are almost there with him and then comes texturing!

04-30-2005, 11:40 PM
Nice update here.... ;)

Good job with the princess... and i like the start of Drago....
Original character. I'm waiting to see it finished!!

Good work my friend. :thumbsup:

05-01-2005, 01:23 AM
• Lol, looks very funny Darko!, waiting for more!

05-01-2005, 10:09 AM
Nice one darko.......funny,and well done....keep this guy xxxagerated to the highest levels darko.....I think that'll work real nice.......have fun and keep it going,nice job.......:arteest: :beer:

05-01-2005, 03:41 PM
Drago looks so cute man, just what you needed!


05-01-2005, 03:45 PM
Really cute dragon - lot's of personality :thumbsup:

05-01-2005, 06:22 PM (

texturing of drago...

and yes they are together aren`t they cute! :D

05-01-2005, 06:34 PM
SuperXCMthnx mate ;)

Virtuoso i`ll try , i`ll try!
Climax plenty more is coming! :)

keetmun hehehe he is sexy! :D

Gunilla he has to be clamsy , fat and so on ;) thnx mate

05-05-2005, 09:34 PM
hm guys i am sorry to inform u that i am not going to be able to finish comp. as i wanted... probably it will be just drago and princess on pic. no background as i wanted :( ... i think that scene will be empty because they don`t have manny details on them... blah at least i got my personal Maskot Drago! his basic usage is for my reel :)

hope that i will even finish this ;) , bye all :)

05-05-2005, 09:51 PM
Ej, Dakic, imas jos 2 nedelje :)
Nemoj da odustajes odmah ....
Ugledaj se na mene, ja cu da odustanem dan pre roka ... hihi
salim se...valjda cu da zavrsim, pa kako bude

05-06-2005, 12:08 AM
Nice Dragon Marko. I hope you create atleast a simple background, you don't need anything too fancy. Nice work on the entry so far though.

05-07-2005, 12:26 AM
Looks good Marko......nice mascot for you......I could suggest you put up a simple wall...a castle wall perhaps,some stone with a nice light.....add a bumped ground texture that matches the wall.......That will give you that added effect and touch for the scene,and still allow you the time to do so.......Ok,best of luck to you marko......:arteest:

05-07-2005, 01:46 AM
Hi marko, don´t give up man!! Make a simple background, but make something ... Like Virtuoso suggest, make a wall or something like this ... Good luck :thumbsup:

05-07-2005, 02:39 AM
Hey bro it's good to hear you'll be adding Drago to your reel! Another step closer to 'The Job' eh? It's a pity you couldn't finish the comp, but neither can I haha! Cheers dude, and we'll see each other again soon!


05-10-2005, 09:27 PM (

thnx for kind words everyone... ia m very busy and i really don`t have time even to put wall and floor :( ... i think i will find some time to texture drago... this is lighting... 3 lights from top ( blue - spot lights) one main sun ( direct ) from down one area light ( yellow) and from all for sides area lights ( yellow)....

this is final scene just need to set up pose little bit of princess and to get drago in scene ;)

CGTalk Moderation
05-10-2005, 09:27 PM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.