PDA

View Full Version : DWIII - 3D - Xarxys - Cyparthesys


Xarxys
02-17-2008, 05:24 AM
Progress so Far on Creature...

http://i248.photobucket.com/albums/gg168/xarxys/model_05.jpg

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart9.jpg

Xarxys
02-17-2008, 05:27 AM
How do you delete a thread that you created I forgot about the naming convention on the first one?

Xarxys
02-17-2008, 02:37 PM
How do you rename a thread you created?

inneractive
02-17-2008, 05:11 PM
Go to the first post and click at the bottom right, "edit post".

Xarxys
02-17-2008, 05:15 PM
I did but the name didn't change for the thread?

Xarxys
02-17-2008, 05:29 PM
Race: Demonic Hex Being
Class: Invoker
Artifact Weapon: Skull helmet Darkness/Void, when the character focuses their will dark energy will be fired from a large dark cystal horn attop the Skull helm.

How does that sound?

Xarxys
02-17-2008, 05:55 PM
Here is my first idea for a character let me know what you guys think

http://i248.photobucket.com/albums/gg168/xarxys/sketch01.jpg

Xarxys
02-17-2008, 06:14 PM
Here is my second idea but he would also have the skull helmet.

http://i248.photobucket.com/albums/gg168/xarxys/sketch02.jpg

Xarxys
02-17-2008, 06:40 PM
Heres another demon idea

http://i248.photobucket.com/albums/gg168/xarxys/sketch03.jpg

Tıax
02-17-2008, 06:50 PM
Race: Demonic Hex Being
Class: Invoker
Artifact Weapon: Skull helmet Darkness/Void, when the character focuses their will dark energy will be fired from a large dark cystal horn attop the Skull helm.

How does that sound?

artifact has to be hand-held weapon afaik , no helmet , necklace , armor etc as artifact..

Xarxys
02-17-2008, 06:52 PM
Really? some people are doing pendants and gauntlets.

Tıax
02-17-2008, 06:56 PM
yea i noticed that as well. i cant quote an official post so nevermind my post actually , my bad :)

Xarxys
02-17-2008, 07:00 PM
It's okay I was just realy confused for a minute there but if you think it would help I can make the characters stand on two legs instead of four?

Tıax
02-17-2008, 07:06 PM
4 legs would be interesting because most people will go for standart humanoid style. a draconinc 4 leg style will pull attention for sure ;)

Xarxys
02-17-2008, 07:09 PM
Thanks :) I was aiming more for the middle ones idea I am goign to start making a more fully fleshed out concept for it.

Xarxys
02-17-2008, 08:54 PM
My idea for my character is an ancient demon hex beast that has come through a wormhole to other realms to drive back other races from attacking his realm. His race has an ancient artifact of a skull helm with a large crystal horn that invokes dark energy to attack his opponents.

Let me know if you have any suggestions of things to add... I started the concept painting only been working on it for an hour because of me constantly deleting thigns change the colors and so on. All feedback is appreciated :)

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart.jpg

Xarxys
02-17-2008, 09:51 PM
This is kinda what I seen in my head for the creatures face

http://i248.photobucket.com/albums/gg168/xarxys/conceptheadstart.jpg

LavenPillay
02-17-2008, 10:09 PM
Good doggie. Sit. Sit.... HEY! I said si---- aaargh!

Yup, I wouldn't mess with one of those. ;)
You've got some nice elements on each image, maybe try combining some o them

#1 : I like the Spines and the back armour (if that is armor, the gold bits)

#2 : I like the Head with the big horns and the semi-winged forearms

#3 : The glowy bits rock!! You have to have that in your final, whatever it is!

#4 - Head closeup : Love the eyes. Very freaky. Although the thin tongue is bothering me. I think it detracts from the overall aggressive feel of the head. But then again, it could also offset it. Looks amost like a feeding tube. Bloody demon doggies.... ;)

Xarxys
02-17-2008, 10:13 PM
Hahahaha! Thank you so much, yes I was planning to add all the different parts of what I thought was cool in each sketch the glowing thigns, the gold plate armor, and fix the spines on the demon creature. What do you think I should do to the tongue get rid of it? Make it thicker?

Xarxys
02-18-2008, 02:58 AM
Last post for the night I am tired and my eyes are probably bloodshot from staring at the screen all day. I know I didn't get very far for almost 12 hours of work but 3 quick concept sketches which led to my final idea and started my full concept sketch is what I have right now.

I hope you enjoy my hex demon now has an acid reflux problem.....

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart2.jpg

http://i248.photobucket.com/albums/gg168/xarxys/headnew.jpg

fluxist8070
02-18-2008, 03:09 AM
looking good.

I think that it would be ice to give the creature more of an underbite. The scale pattern and the plating is going to be important. Might be nice to do something other than a reptile scale pattern.

Xarxys
02-18-2008, 03:14 AM
hmmm I havent' thought about the scale pattern yet I'll have to draw up some scale patterns when I get back from work tomorrownight. Thank you.

Anuxinamoon
02-18-2008, 03:24 AM
Heeey this is looking pretty cool. Does he have 3 tails? I like the three tails :)

Xarxys
02-18-2008, 03:25 AM
He has two tails but I can make him have 3 tails :) Might kill my poly count though.

Anuxinamoon
02-18-2008, 05:30 AM
Hmm yeah better stick with 2. Like those mind controlling cats from Japanese folklore ^^

Work on the silohette alot, cause the normal will take care of most of the small details. The head will be your focus point so try and concerntrate your design there. Try and have no more then one main focal point.

Xarxys
02-18-2008, 06:14 AM
Thank you so much for the advice I will definetly do that. I am glad you like the character :)

LavenPillay
02-18-2008, 06:21 AM
looking good.

I think that it would be ice to give the creature more of an underbite. The scale pattern and the plating is going to be important. Might be nice to do something other than a reptile scale pattern.

Flux is onto somthing there. I think an underbite would look good.

Oh, and a Practicle aspect of the head design that may or maynot need some work depending on what you want :
The horns on the head should be "wider" (further away from the sides of his head) or shorter (ending before the tip of his mouth.

'Cos at the moment, he's gonna find it pretty hard to bite on something cos the horns will get in the way.

Unless he's gonna lick them! Hahahah! "How dare you call me a Pig Dog!? I speet on you !"

madshooter
02-18-2008, 10:16 AM
Weeeeee... Four legged creature, Nice plan:) Your concept is interesting Dude All the best:thumbsup:

Xarxys
02-18-2008, 01:08 PM
Thank you all for your advice you can be expecting a new picture post soon with a larger underbite and the horns farther away from his mouth and I will add more detail to the head to make it more interesting. Any suggestions for head details?

madshooter
02-18-2008, 01:14 PM
For head details I think thick nerves will look good, also from his nostrils U can show blue or green Glowy smoke comin out.

Xarxys
02-18-2008, 02:27 PM
The smoke idea is awsome I think I will do green, What do you mean by thick nerves??

inneractive
02-18-2008, 08:25 PM
Hey I think it's great you are doing a creature for this comp. Looking forward to seeing the concept fleshed out.

DDS
02-18-2008, 08:44 PM
so far, so good! love the 3 eyed eyes :D

Digiegg
02-18-2008, 08:47 PM
Damn man, a freaking dragon? Lol... Very nice idea.
Head detail wise, I think you should keep it simple. The 3 lines you have on his head is a bit distracting for me. If you can get a clear view of his head, it'd be great.
keep pushing man!

Xarxys
02-19-2008, 12:18 AM
Thank you all for your advice I am sorry about the delay I just got back from work I am immediantly starting fixing the concept making him have a larger underbite, shortening his horns, and clearing up the lines on his face. Let me know what you guys think when I get the new Hex Demon image posted. :)

Xarxys
02-19-2008, 02:38 AM
Okay I extend the lower jaw, shortend the horns, got rid of the lines in the face, and added green smoke to his nostrales.

Before:
http://i248.photobucket.com/albums/gg168/xarxys/headnew.jpg

After:
http://i248.photobucket.com/albums/gg168/xarxys/conceptstart3.jpg

Xarxys
02-19-2008, 03:13 AM
Thoughts on color arrangements? Is there a way in texturing or zbrush to make a character look feathered or furry cause that is what I origniallly wanted for this character to make him seem more like a demon and less like a dragon but I don't know how exactly I would do that with textures or zbrush??

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart4.jpg

madshooter
02-19-2008, 12:18 PM
The smoke idea is awsome I think I will do green, What do you mean by thick nerves??


Sorry I mean to say Thick veins:)

Xarxys
02-20-2008, 01:51 AM
My orignal thought of this character was to be both furred and scaled let me know your guy's thoughts.

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart5.jpg

Xarxys
02-20-2008, 02:33 AM
Let me know if this is too much stuff going on or I should take something away and add another. And I am change the wings so they are more like scythes than wings.

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart6.jpg

Xarxys
02-21-2008, 03:27 AM
Come on guys need some feedback here.... Fur good or bad?

Anuxinamoon
02-21-2008, 01:22 PM
The wings are cool but I think the fur should be left off. Try giving him something like scales instead, they are easier and wont break your poly budget. Also they come out nice on the bump map :)

Xarxys
02-21-2008, 08:00 PM
I've seen so many creatures with scales though I wanted tot ry and do soemthing different. I only wanted to do the fluffy parts with alpha'd planes but there must be a way to fake it in zbrush and texturing as well?

jamesylvester
02-21-2008, 09:01 PM
i quite like the idea of a furry dragon, quadart did a tutorial on texturing short fur that looks quite good here it is

http://www.zbrushcentral.com/zbc/showthread.php?p=424441#post424441

Xarxys
02-21-2008, 09:05 PM
Thank you so much for sending me that tutorial I will definetly have to try that when I start texturing :)

Xarxys
02-21-2008, 10:07 PM
Update need to finish this quickly so I'm not goign to put much more detail in the concept.

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart8.jpg

http://i248.photobucket.com/albums/gg168/xarxys/conceptstart9.jpg

http://i248.photobucket.com/albums/gg168/xarxys/Cursednegativeskullhelm.jpg

DrFx
02-21-2008, 11:20 PM
Hey Xarxys, I think your dragon just keeps getting better! THe current design reminds me of deep sea fish, for which I searched reference for my Strange Behaviour entry. There are some scary looking ones out there, I'll tell ya! :D
The fur could be faked with alpha'd planes, as you suggested, but don't cover the entire body because of the poly budget.
Good luck and keep on improving!

Xarxys
02-22-2008, 12:27 AM
Thank you I am glad you like it and yeah I wasn't planning on doing the whole body in fur just the neck and the back. The rest of the body is going to be scaled. I was goign to do alpha planes for the "fluffier" areas and then fake it with texture and normal maps for the rest of it.

Deep-Wulf
02-22-2008, 05:01 PM
You've been improving! I see you still enjoy dragons. This one looks especially mean- I'll have to agree with the deep-sea sentament. The lit tentacles remind me of bio-luminescent fish (like the Angler).


My only crit is that the artifact is not incorporated into the design as a whole very well. His helmet seems to be a seperate add-on when I feel it should be a more holistic creature-item design- they should compliment into a unified whole.

Great work so far! Keep it up.

Xarxys
02-22-2008, 06:32 PM
Thank you for commenting. I was iffy about the skull idea as well do you think doing attachable claws would be a better idea?

HappyCookie
02-24-2008, 10:45 AM
Nice creature you've got here, can't comment much as you seem to have evolved it to the point where 3D is going to be the next step, and it looks good. Keep us updated.

madshooter
02-24-2008, 12:16 PM
Yeah Dude now 3d, can't wait to see it modeled:bounce::bounce:

Xarxys
02-24-2008, 06:00 PM
Thank you all for you comments I start modeling the beast today and I hope to have the mesh at least blocked out and I will post it as I progress :)

Loukor
02-24-2008, 06:05 PM
Looking good Xarxys, keep pushing that awesome effort of yours. Cheers.

Airflow
02-24-2008, 06:40 PM
Some really great progression. I like the 3 eyes detail. I think the horns should be rotated round and scalled up. As it stands the horns are more defensive than offensive, look at all the horned creatures you can find, their horns point outwards not inwards. Apart from that your doing fine.

Xarxys
02-24-2008, 07:27 PM
I'll look into other creatures horns and see if there is something I like. I was building the horns as more of an aestitic thing than working thing though.

Xarxys
02-25-2008, 01:31 AM
Oh no the beggining of the low poly mesh, looks more like a limbless dinosaur to me lol

http://i248.photobucket.com/albums/gg168/xarxys/modeldemon_01.jpg

LavenPillay
02-25-2008, 04:26 PM
Groovy! Getting the hands dirty! :)

First suggestion before you get too far along, the hind quarters should actually be as large (muscular) as the front, if not more.

Well, thats based on the general anatomy of quadrupeds. If your little bugger is meant to be a "tough" beast, then maybe get some big cat reference (I'd recommend Lion, Tiger and Leopard in that order).

And if he's meant to be more slim/lithe then maybe a cheetah or cougar.

I just did a quick scribble on this here tiger (see attachement) ;)

Good luck !

Xarxys
02-26-2008, 03:30 AM
Thank you I will fix that and post when the model is farther along :)

MrEric
02-26-2008, 10:49 AM
i want say somethinn new but laven tell you all ;) keep working :)

Xarxys
02-27-2008, 12:27 AM
Yay! for hard working.

Skunkie
02-27-2008, 01:33 AM
OOOOOO Shiny. Looks awesome so far!

madshooter
02-28-2008, 06:53 AM
Good start on modeling, waiting for more updates:)

Xarxys
02-28-2008, 09:08 PM
Small update of the model....

http://i248.photobucket.com/albums/gg168/xarxys/model_02.jpg

http://i248.photobucket.com/albums/gg168/xarxys/model_03.jpg

Xarxys
03-02-2008, 09:07 PM
Low rez mesh almost done... I need some new ideas for an artifact any ideas?

http://i248.photobucket.com/albums/gg168/xarxys/model_05.jpg

madshooter
03-03-2008, 07:13 AM
Model looks good:). For artifact, model some thing which will be attached to his body, like a part of his body. Or may be tied up with some kind of chain. Below is the link to a ref image.

Ref: http://www.counteragent.com/wp-content/uploads/2007/11/unreal_engine_3_wii_beast.jpg

Xarxys
03-03-2008, 02:41 PM
Thanks for the feedback, does anyone think claws kind of like wolverine from X-men but a completely different style would look cool?

Xarxys
03-07-2008, 01:00 AM
My apologies for no new updates yet I'm in the middle of a art test for a company :)

madshooter
03-07-2008, 06:21 AM
All the best for that Art test:thumbsup:

Xarxys
03-07-2008, 01:12 PM
Thanks so much! :bounce:

DDS
03-07-2008, 02:11 PM
dang I hope this art test goes rocking man!

Btw nice start, I really like your concept it matches CGS color scheme a lot

Xarxys
03-08-2008, 02:12 AM
Thank you so much, and yes I was aiming for CGS's color scheme :bounce:

CGTalk Moderation
03-08-2008, 02:12 AM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.