PDA

View Full Version : Pining the Elbow


shinyprem
10-04-2007, 10:14 AM
Hi ...

Can someone throw light on rig.. how the Elbow can be pinned in IK mode? Any useful tips or tutorial is appreciated.

Rgds,

crumbly
10-04-2007, 01:50 PM
You can pin it to your PV control by using two distanceDim nodes: one from the start joint of the IK chain (upArm) to the PV control, and the second from the Pv control to the joint at the end of the chain (wrist). Then you just have to blend the distanceDimShape.distance values into the Uparm and Elbow tx with your elbowPin (or whatever it's called) attribute.

It's key that the three joints in your IK chain lie on x, y, or z axis plane. If they don't, the elbow will drift as you move around the PV.

Hope that helps.

shinyprem
10-05-2007, 04:26 AM
Hi Crumbly,

Thanks for your hint, I got the blending idea. All is working fine.

Rgds,

CGTalk Moderation
10-05-2007, 04:26 AM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.