PDA

View Full Version : HMC #9: Grievous v. Maul


quasiagent1
06-06-2007, 12:03 AM
I've decided to throw my hat into the ring. I was unable to finish the last challenge because I had other projects that needed my full attention. Hopefully this will not be the case, as I am a HUGE Star Wars geek.

I have chosen to do a cool yet never-seen-because-of-its-unrealistic-nature duel between General Grievous and Darth Maul... that makes, what, 6 lightsaber blades? Only time will tell if I am biting off more than I can chew. I will most likely make the diorama a simplistic one, and leave the detail to the models.

I will include a concept sketch of the scene soon, but for now, here is were General Grievous is thusfar. I'm waiting to do too much more until I can have the movie in front of me for reference. Let me know what you think.

http://www.thefingerprintsofgod.com/generalg.jpg

OvidiusTiberius
06-06-2007, 11:19 AM
Hey this is a realy interesting subject....keep it up ,i am wondering how it looks when is finished

darklopium83
06-06-2007, 03:41 PM
your model looks pretty cool, the continuation the continuation!!

Boone
06-06-2007, 05:17 PM
This ought to be a good laugh! Good luck, mate and welcome to the challenge.:thumbsup:

quasiagent1
06-06-2007, 05:39 PM
Here is the picture I will be drawing my inspiration from... I will most likely make the final version look exactly like this... except for the Wolverine part :P

http://wolverine.x-knights.com/fullsize/wolverine92.jpg

Star-Scream
06-06-2007, 05:44 PM
Yeah this will look great, i am waiting for your finished piece :D

gregorioSB
06-06-2007, 07:48 PM
Looks like you've got a good start on Grievous. Going to start my own soon, but it looks as though I've got catching up to do already! I like that pose, it will be interesting to see how you adjust it to account for all the extra sabers.

quasiagent1
06-07-2007, 05:19 AM
Thank you for your replies. I'm a little worried about the inner workings of Grievous. Even with the DVD in front of me, all of his innards are in shadow... which makes a pure modeling challenge difficult. Anyway, here is a brief update.

Believe it or not, all four arms are there, they are just in their combined mode. For any others that attempt General G (and weren't geeky enough to notice already :P) his hands in this mode are six-fingered, and they split into two three-fingered when he uses all four arms. I say all that because I had started modeling those arms and hands under a very confused misconception of his skeleton. Lemme know what you think.

http://www.thefingerprintsofgod.com/generalg2.jpghttp://www.thefingerprintsofgod.com/generalg2b.jpg

quasiagent1
06-08-2007, 06:39 AM
Here's my progress for today. As I stated before, Grievous is a tough one, as he has MANY intricate parts and MOST are hidden in shadow or motion blur. Overall, I like the way he is looking, though his feet and "calf" area are not proportioanlly correct, I think. Let me know what you think.

http://www.thefingerprintsofgod.com/generalg3.jpg

robo3687
06-08-2007, 07:20 AM
as you said the legs are proportioned badly....but the most glaring thing for me is that he is waaaay too wide across the front.....if you scaled that back a bit it might start to look on track more...

quasiagent1
06-08-2007, 07:51 AM
Thanks for your reply robo... I've always had an issue stretching proportions, and Grievous is a tricky one for me to grasp, especially with his always-hunched stance. I made a few minor tweaks the proportions of the torso (which is what I assume you were talking about) and his feet.

http://www.thefingerprintsofgod.com/generalg4.jpg

quasiagent1
06-09-2007, 07:12 PM
Here is a quick update. Not many visible changes have been to Grievous, mostly because I added a lot of inner-skeleton work. The knees especially look disconnected, as the inner-working are all in black. He is, however, nearly finished... He only needs a better "inner-shoulder" region, which I cannot get a clear shot of from the DVD.

http://www.thefingerprintsofgod.com/generalg5a.jpghttp://www.thefingerprintsofgod.com/generalg5b.jpghttp://www.thefingerprintsofgod.com/generalg5c.jpg

Also, here are the lightsabers that I will be using for the scene. I may change up the hilts of Grievous' sabers, as they are all the same at the moment.

http://www.thefingerprintsofgod.com/sabers.jpg

I've started on Darth Maul's head, but am curious how easy it will be to capture a likeness *without* using a texture. I've already created a base head, and even at this rough stage with a pic of Maul's face just planar mapped onto the mesh... it already looks pretty dang decent. In any case, here is the pic I am working from:

http://web.ukonline.co.uk/bingo275/sideshow/SideMaulRayPark.jpg

quasiagent1
06-13-2007, 10:31 PM
Here is my first post on Darth Maul, and I am unsure how much more detail is needed, nor how close to the likeness I have gotten. As I mentioned before, the strength of the texture completely masks most of the finer wrinkles and grimace lines...

Suggestions/feedback?

http://www.thefingerprintsofgod.com/maul1.jpg

gregorioSB
06-14-2007, 03:09 AM
Looking good so far, quasiagent1. I like grievous, and look forward to seeing him posed.

As for Maul, the detail in the face looks good so far, and you're right, much more detail, and it'll all just get covered up. I would suggest a better seam between the horns and the skullcap. Some bulge at the base will make them look more like they're growing out of his head, not just tacked on. For the likeness, it may just be that the left-hand image is a little squeezed, but his face seems a little long, and his mouth curls up too much, rather than out. I'm not so sure, though, would need to check out more refs.

quasiagent1
06-15-2007, 04:41 AM
Thanks for the good feedback Gregorio. The horns are one of the few details I still want to add in, as well as enlarging the pupils. For the moment though, I've been working on his body... and I've been taking a (for me at least) unusual approuch to it.

I have no plans on rigging Maul in any way, and I already knew exactly what pose he was going to end up in... so I'm modeling him IN the pose. And, I'm modeling using nurbs curves and lofting... which I have much les experience doing. I am, however, pleased with the results.

However, like Yav, I'm having diffiiculty staying away from lighting and rendering, and I am kinda glad I did a test render... For some reason, no matter what kind of shader I use, Darth Maul's head stays flat black. Can anyone think of a reason that might be? I am using mental ray with ray tracing, global illumination and final gather on... I am VERY new to mental ray rendering, but I've noticed a huge step up in render quality with it, so I decided to go that route.

I should also note that NO, most of his body is not complete yet, especially his left arm. Without any folds added in, it looks a little like he lost a sleeve... but anyway...

If anyone has advice on fixing the black head issue, please let me know, and thanks.

http://www.thefingerprintsofgod.com/maul2.jpg

eldee
06-15-2007, 05:09 AM
Looks like you might have the normals reversed

Yav
06-15-2007, 05:11 AM
I think you are making a big mistake by modelling Maul in pose. When looking at the picture you're trying to recreate, you should be imagining his pose in three dimensions. The easiest way to do that is to rig him with a standart skeletal structure and by moving the individual joints, you'll be getting insant feedback of the anatomical deformations that occur within the body. The impact of your decision is already showing on your model. His right shoulder looks broken and some parts of the body already look out of proportion to one another.


As for Mental Ray, If I were you, I'd use V-ray (Bulgarian made software...makes me proud:)) Mental Ray really is quite hard to use and it's also pretty slow.

quasiagent1
06-15-2007, 05:59 AM
Hmmm... Yav, I have to agree with you, I'm not as pleased as I would be with the instant success that modeling then posing can achieve... but at the same time I really love the control I can get from NURBS modeling (my main concern was getting his skirts/kilt/robe flaps to deform properly like cloth, which I knew I could model in pose easily)... however, I think I agree with your overall point, and I'll be starting the body over... I just hope that my switch-over isn't too late in the game.

As to v-ray, that looks like an awesome renderer, but I work in Maya exclusively (though I know 3DS Max somewhat), and they don't have a plugin for Maya as of yet.

And eldee, reversing the normals didn't change anything... altough I have noticed as mental ray renders that Darth Maul's facial texture IS visible in one of the first "passes." Again, with my limitted experience with mental ray, I have no idea what that means.

quasiagent1
06-20-2007, 07:56 AM
I despise automagical fixes, but, low and behold, Darth Maul's face is no longer black... and I have no idea why. Best not to look a gift horse in the mouth I suppose, but I sure wish I knew what I had changed.

Darth Maul is 90% done, with a lot a of the finer details waiting until the very end. I did a very basic mesh, rigged it, and sculpted in the details once he was posed. I'm now working on posing General Grievous in the same scene. It's far too late at the moment to upload any pictures, but I should have some tomorrow evening.

Right now I am wrestling with a) a good composition with all of those lightsaber blades and b) the overlapping glare of all of the blades plus my lighted background... a lot of details of the blades themselves get washed out.

quasiagent1
06-25-2007, 09:48 PM
Well, after a lot of tweaking with the poses, lighting and shaders, I think I'm finally satisfied (more or less) with the pose and "theme" of the scene, though I have a dozen+ further tweaks I still want to make.

I changed from the stripes of light in the background because all of those lines, plus the six lightsaber blades really competed with each other. I also changed to a ruddy background because the grey tones of the original didn't provide enough of a contrast with the models.

C&C welcome, and really wanted actually...

http://www.thefingerprintsofgod.com/Star%20Wars2.jpg

shahabp
06-25-2007, 10:58 PM
looks good,
compare to the reference picture, Grievous doen't have a dynamic pose.
what makes that picture appealing is the pose of Wolverine.
everything else looks right but I guess more dynamic pose can make a huge difference.
good luck

quasiagent1
06-26-2007, 01:15 AM
I can see what you mean, but I'd be curious if you had a suggestion on what would make the pose more dynamic. I focused more on getting the blades to be in a position that at least made sense. So if you had any input on another configuration I'd be more than interested in hearing it.

michaelshippy
06-26-2007, 03:30 AM
First of all, great idea and execution so far!

My initial thought for a more dynamic pose for the General is that his legs might need to be more crouched and ready for the impact/assault that Maul is bringing. As they're positioned right now, he looks like he might be getting ready to topple over. Also, if Maul is getting ready to strike Grievous' legs or midsection (I might be misinterpreting the action - apologies if so!), then Grievous' cross-block with his two right hands is too high...unless you're pulling for Maul to win. :thumbsup:

quasiagent1
06-26-2007, 05:56 AM
Ty for the feedback and suggestions. I should have an update by tomorrow evening.

John-S
06-26-2007, 06:10 AM
You have done a terrific job!

I agree though that grieves needs a sturdier standing at least.

Very :cool:

willbrown
06-26-2007, 04:56 PM
Are you kidding me? I didn't see Darth M in ROTS. Is this a deleted scene? ;0]

Absolutely stunning image. It captures the look of Star Wars perfectly.

YOU DA MAN!

Got my vote!

sapienz
06-27-2007, 04:59 AM
Too many lights around the image. If i were to do this image, i'll focus all the attention towards 1 single point. Try gettin grevious to wield his all 4sabers towards maul rather than letting them hang lose.

Maul seems under lit, btw is he missing a leg currently?

quasiagent1
06-27-2007, 07:50 AM
Thanks again for the feedback.

Sapienz ~ I tried not to have all of the blades coming at Darth Maul on purpose... the glare of the blades tends to blot out any underlying modeling, and I didn't want to do that too much. Darth Maul had a flat black lambert applied to him, so what lighting was on him did not reflect at all... making him appear very poorly lit indeed. And yes, he has two legs, one crossed behind another, but the aforementioned shading issues disguised that fact.

To those who mentioned making General Grievous take a more dynamic pose, well... is this a decent improvement for you?

Also, a friend suggested adding sparks to the intersecting area where the sabers clash... So I did :D

http://www.thefingerprintsofgod.com/star%20wars3.jpg

quasiagent1
07-05-2007, 10:28 PM
I believe this will be my final entry, though I would always love further comments or critiques.

The basic change I made was in the camera angle. Let me know what y'all think.

http://www.thefingerprintsofgod.com/star%20wars4.jpg

rustyboi
07-11-2007, 09:42 AM
Ouch my eyes!

yoff
08-02-2007, 03:31 PM
Nice picture, the pose of the general is much better now. If you still want critique, it seems that Dath Mauls grip on his light saber is very loose. It might reflect the serenety of a master swordsman, but a stronger grip might better refelct battle rage...

CGTalk Moderation
08-02-2007, 03:31 PM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.