View Full Version : What do you think about these hardwares?
01-14-2003, 04:29 PM
Since to do my 3D, I only have a PII 350Mhz, 64 meg of RAM and a Voodoo 3 2000, I thought I'd need some new pieces of hardware.
Could you please tell me if they're worth the buy?
-512 meg of SDRAM;
-Ti4200 Geforce 4;
-Intel Celeron Processor @ 1,7 Ghz.
But since my motheboard is really really old, do you think I would need a new motherboard? I don't think the one I currently have (6 years old) would support these...
01-14-2003, 11:19 PM
You would need a new motherboard for sure.
I'm not sure about performance increases though... sorry
01-14-2003, 11:34 PM
a P4 1.7GHz will be useless to you. they're based on the first generation P4 cores, and with the 400MHz FSB are pretty much useless. you want at least a northwood core, and the 533FSB if you can find them.
try for a P4 2.4B or 2.53 chip if you can afford it. these are much better.
also, if you are upgrading your motherboard, consider an athlon system instead. you can save a few dollars and still have yourself a damn fine box. there's pretty much a consensus on the athlonXP CPU and nforce2 motherboard combo as a great setup that's pretty easy on the wallet.
you mentioned a celeron 1.7GHz!!! YUCK YUCK YUCK! stay well away from these.
and yes, you will certainly need a new motherboard. PII architecture is based on the old slot-1 motherboards, which will not take a socket CPU.
01-15-2003, 01:29 AM
It sounds like your pretty caught for cash. The cheapest and fastest upgrade you can possibly go for is....
A k75SA ECS board... It goes for around 50 USD, and supports up to 2400+ XP's.
A 1700+ or 1800+ XP (These go for around 50 USD as well)...
The ECS board allows you to use your existing SDRAM. You will probably need a new power supply however, minimum of a 300 watt.
You can also look for nforce1 motherboards, as their pretty inexpensive. I guess it all comes down to how much budget you have to spend on a new machine. (As your upgrade routes are pretty much nil).
01-15-2003, 02:02 AM
Under $1000, fast (it's gonna make your 350 look like the true doorstop it is;))
Others might have other suggestions for components, this would be the route I'd head if I were to by a new system today (lacks cd burner, mouse, keyboard, ect)
As mentioned, you're going to have to buy a whole new system. Any single upgrade will just get bottlenecked on one of the other older components, or not function/fit at all.
01-16-2003, 11:57 PM
Well first, thank you very much for your replies :)
Since there are some terms I'm not really familiar with, I will try to make a resume of what was said.
I will need a new motherboard for sure. I knew this was necessary, but I don't really know the mobos pretty well!
Best thing to do would be just to buy a new computer, maybe a clone, since I'll be able to have the pieces I want.
I have to stay away from Celeron, and I don't need the new P4 processors, because of the FSB (?). I also heard I had to stay away from packages, like HP or Compaq. (?)
01-14-2006, 04:02 AM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.
vBulletin v3.0.5, Copyright ©2000-2014, Jelsoft Enterprises Ltd.