Timelapse vid, tiger

[AnimaLMotheR]

Thx Martin. These videos are always very educational. :)

[BASSit]

It´s great - dude ! Hope to see some more of your work. I really like the way you´re modelling :D
Thanks 4 sharing !

[rsalonen]

AWSOME MAN!
this is just simply awsome!

I love how you model too!
it's going so fast (I know, it's speed up, but anyway). I'm sure you know what you're doing ;)

I can't wait to see the finnished, textured version.

I'm also a big fan of Amano since a few years back. And I can see some similarities to his work.
Your painting is also awsome!

Keep up the superb work!

[machuc]

Really nice work... I'm heading to ur challenge thread.. i want to see more! :D

[iNFERNiS]

wow looks nice gonna check it out!

btw: is there any way (program) to slow it down? would be very usefull!

[JuRrAsStOiL]

the video is just great, but I think you saw my
reply on the other big forum (don't want to
tell the name :D) it also starts with "cg" :)


I'm using the RadLight Player (http://216.194.92.96/) to slow down the
movies, but it just get up to 50% if you want
25% or less you have to use Adobe
Premiere or something like that.

[Martin-K-]

ifran view is what you want.

try www.download.com and look for it. you can interactively change the speed down to whatever you like

[paku]

wow very insperational and educational ^_^ great work, pls point me to a library of time laps modeling films hehe...

[chadlychoo]

Awesome as always Martin! I love timelapsed videos, it gives noobs like me a chance to see how other people work. :D

[Hmura]

Excellent stuff as always !!! :thumbsup: :thumbsup: :thumbsup:

Ill give this one a go, haven't used Mirai for a while :p
btw, why do you call it a tiger isn't it a dragon, or is it a dragon called tiger or........

Hmura

[Flynn]

hey..I tried to download the movie twice on 2 different machines but I get an error everytime to extract.

anyway the still looks awsome!

[Cyberdodel]

I have the same problem. I can't open it, too. I would really like to see it...

The error appeared with winzip and winrar and I downloaded it twice...

I'll love you if I may see it :D

[minus]

I've tried Downloading on two different operating systems using both winzip, and ace, I get CRC errros everytime.. :( -- I'm sure the video is great as I have collected all your other videos. Any chance of repacking this one?

[Martin-K-]

repacking? i just tried it and it works. ill probably just rar it, and make a few volumes out of it. ( end of the day tho :)

[Martin-K-]

reuploaded it.
its an avi now.

i tested the download. it went at 184kbs, downloaded fine. and worked when i played it.

http://ambient-whisper.cgcommunity.com/MV/Videos/Tiger/M-K-TIGER.avi

right click/ save as...

[minus]

O.k...Having seen it now.... I can say that has got to be the very coolest time-laps video I've ever seen. --- I've seen nothing like it. Refreshing to see someone take the time to create the video with a model that wasn't a head, or some other portion of the human anatomy as there are countless videos out there on those topics.

[toce]

great vid, very helpful!! :) Thx

p.s. you really should put more stuff on your website... and those flash things are really brilliant (hehe, I did the same thing with one of my characters but w/ animated gif last year on my website..)

[jjburton]

Just wanted to say thanks for sharing. I know that it must have took some doing to get that time lapse video together. I'm curious, does anyone know what modeler that is, I don't recognize it (I've used softimage, max and lightwave, maybe a cusom interface?). Just curious, thanks again. Great work.

[JuRrAsStOiL]

Originally posted by jjburton
Just wanted to say thanks for sharing. I know that it must have took some doing to get that time lapse video together. I'm curious, does anyone know what modeler that is, I don't recognize it (I've used softimage, max and lightwave, maybe a cusom interface?). Just curious, thanks again. Great work. It's Mirai I think...

[Hellbring]

Hey I downloaded your video and also irfanview. Thing is it works with my mediaplayer but in irfanview I dont get any image from the video. It acts like it plays but no picture comes. Funny thing is that the warcraft III trailer in divx 4 runs in it. What type of compression are you using for this?

[Martin-K-]

thanks guys.

toce: that turntable of the character thing was done by a friend. not me. i just put my characters in it. :)

jjburton: Mirai 1.1

It's Mirai I think...
yep

Hellbring: im sure i used divx 3.11 but it might have been 4.
i checked ifranview just now. and it worked for me.

thanks again :)

[kandyman]

martin - what kind of gfx card/driver are you using for mirai? It runs kinda ok on my geforce2/winXP, but the selection overlays are slow.

I wanna get back into mirai after working a lot with nendo last week...

BTW... The tiger just rock. Please post an animation when you get the time!

marin

[dutch]

very nice

how long did it take you do that? or how many times was the video sped up?

also how come you work so far away from the model at certain times?

ne ways you are very quick it seems

(and the bone system looks bad ass)

[Martin-K-]

not sure how long it took. i was probably thinking more of where id go next than actually modelling him. ( except near the end when was rushing ( see back legs :D )

as for videocards....
im using a geforce 2 gts with 64 megs. ( 12.41 drivers ) and ive patched it to a quadro.

but im thinking of buying a quadro4. just because its finally got hardware overlays.

all the previous quadro cards only had software overlays.
...( tho id preffer buying a geforce 4 and patching it. but it appears that the hardware might be different this time....(doh )

[Flynn]

hey man thx for reposting the video...all I can say is WOW!

Do they have a demo version of that software?...I want to try it out.

I have the meshTools for 3dsmax4 but you were doing some wild stuff that I dont think I could do with meshTools.


are you gonna post a render of this model anytime soon? :)

[dutch]

cool cool

yeah i think im gunna get an asus geforce 4 ti



mm

dual head

[cathode]

I would love to hear more about Mirai... I emailed izware "requesting a demo" but haven't heard back yet. I have played with nendo, which I loved!

[rendermonkey23]

Originally posted by Martin-K-
not sure how long it took. i was probably thinking more of where id go next than actually modelling him. ( except near the end when was rushing ( see back legs :D )

as for videocards....
im using a geforce 2 gts with 64 megs. ( 12.41 drivers ) and ive patched it to a quadro.

but im thinking of buying a quadro4. just because its finally got hardware overlays.

all the previous quadro cards only had software overlays.
...( tho id preffer buying a geforce 4 and patching it. but it appears that the hardware might be different this time....(doh )

What I really want to know is what res are you working at and how big is the window that your doing the timelapse vids in? What about the FPS captured and FPS playback?
My problem is that I work at 1600 x 1200 and always one viewport fullscreen. So capturing even 3-5 fps at that res makes the whole system slow and hard to work with. If I keep'em 4 viewports and just model in one of them for the vid, it sucks because the viewport is to damn small to work in. For my personal style anyway.

[Vic3k]

that's all really good.
what program did you use to capture? link would be nice too.
thx

[mattam]

Great video Martin! :) I loved how you modeled all the little details particularly, and rotating those screws even :)

It seems that most people recording video tutorials nowadays are using Camtasia from Techsmith ( http://www.techsmith.com ).

[Daxx]

:scream:

[vizion]

sweet! thanx for ur expertise..great character and even better 3d model.

[Cman]

Can't download the movie anymore!
Where'd it go?!

[policarpo]

doh!

i'd email it to you but it's 26MB. i don't have that much space on my server to offer it for download.

Maybe Martin will repost it.

:D

-policarpo

[MaskTX]

What has inspired you to do such thing??
It is...And you are... Dont know what to say! Great! How to download and play your Tiger video tutorial???:buttrock: :buttrock: :buttrock:

[CGTalk Moderation]

This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.