Official Rhino Tutorial Thread

[iso]

a GOOD tutorial list would be nice. I bought rhino back at close to the end of v1.x and was never able to become effcient with the program.

There are tutorials out there that go over the basics and sometimes those are good to remind you of the simple ways of doing things, but there are few tutorials that go over the techniques that need to be used when I find myself scratching my head, and wondering "how am I supposed to do this?"

I guess I should post a link too, instead of filling this topic with useless blah blah, so I will post the most obvious link

http://www.rhino3d.com/tutorials.htm

[kiwi8]

Heres one that explains "The Curse of the Polygon"
good read

http://www.hydraulicdesign.net/meshes.htm

[kiwi8]

Modeling Nurbs Hand

http://www.3drender.com/rhino/NURBSHAND/index.html

Modeling Nurbs Head

http://www.3drender.com/jbirn/ea/HeadModel.html

[scrimski]

Modeling an AUDI like car (http://www.smcars.net/forum/viewtopic.php?t=15217)

Modelling an aircraft (http://www.geocities.com/SiliconValley/Haven/2470/rhinotut.html)

Rhino Tutorials on Renderosity.com (http://www.renderosity.com/tut.ez?Sectionid=12371)

[Radiant]

OK. When wer'e talking about Rhino tutors, I'm adding few videotutorials made by me :)

http://www.cgart.cz

"Tutorials" section... BTW, guitar tutor. is commented in czech :thumbsup:

[EighthDecay]

Ahh its nice to see a Rhino Forum here.

well I have a few on my site, I'll do more when I get some free time, so don't expect anything soon. :-P

http://wtdesign.flashex.com/Tutorial_Page.htm

[sabaman]

i have 4 small tutorials here,....


tuts (http://sabaman.alfacom.org/tuts.htm)

[kirisute]

not much help to the masters...
but these two might help mewbies come to grips with some of the basic techniques i use in Rhino:

Bladed Weapons:
http://www.forgefires.co.uk/files/blades.pdf

and a bit more advanced bladed weapons:

http://www.forgefires.co.uk/files/rhinotute.pdf

[Hypernaut]

Secrets of Rhinoceros (http://www.3drender.com/rhino/)
Various great tutorials, with all you need (textures, line diagram etc). Formerly sold on CD now available for free

[scrimski]

Minigun Video Tutorial (http://www.3d-palace.com/videos_free.php?pid=5)

Need to register

[baczy]

Hi guys,

i made a small Video Tutorial showing how to get Rhino models properly into XSI.

Watch it here:Exporting IGES from Rhinoceros to XSI. (http://www.rhinocorner.de/vtm)

There will be (at least i try) more tutorials in the future.

[Rani]

A list of pretty much every web-based rhino tutorial I could find (not including video tutorials). Can use some more sorting (too many stuff under the misc section).

Advanced Techniques/Shapes & Scripting:

Gem Cutting Tutorial (basic) – by A B Carter:

http://market.renderosity.com/~rhino/abcarter/gemtut/facettutorial.htm (http://market.renderosity.com/~rhino/abcarter/gemtut/facettutorial.htm)



Gem Cutting Tutorial (advanced) – by A B Carter:

http://market.renderosity.com/~rhino/abcarter/gemcut2/gem_tutorial2.htm (http://market.renderosity.com/~rhino/abcarter/gemcut2/gem_tutorial2.htm)



Gem Cutting Tutorial (more advanced) – by A B Carter:

http://market.renderosity.com/~rhino/abcarter/gemcut3/gem_tutorial3.htm (http://market.renderosity.com/~rhino/abcarter/gemcut3/gem_tutorial3.htm)



Braided Rope Tutorial – by Modulok:

http://market.renderosity.com/~rhino/modulok/ropetut.html (http://market.renderosity.com/~rhino/modulok/ropetut.html)



Command Scripting In Rhinoceros/Creating a Pompeian Peristyle Courtyard – by Roland Montijo:

http://www.3drender.com/rhino/scripting/index.htm (http://www.3drender.com/rhino/scripting/index.htm)



Bladed Weapons (basic) – by Kirisute:
http://www.forgefires.co.uk/files/blades.pdf (http://www.forgefires.co.uk/files/blades.pdf)



Bladed Weapons (advanced) – by Kirisute:

http://www.forgefires.co.uk/files/rhinotute.pdf (http://www.forgefires.co.uk/files/rhinotute.pdf)




Cars:
Car Rim Tutorial – by Spike:

http://market.renderosity.com/~rhino/spiketuts/rim/rimtut.htm (http://market.renderosity.com/~rhino/spiketuts/rim/rimtut.htm)



Mag Wheel Tutorial – by Axe:

http://market.renderosity.com/~rhino/axestuts/magwheel/magtut.html (http://market.renderosity.com/~rhino/axestuts/magwheel/magtut.html)



Shelby Cobra 427 Tutorial (http://www.dark3d.com/Tutorials/nurbscar/index.asp) – by Starr Allen Shaw:

http://www.dark3d.com/Tutorials/nurbscar/index.asp (http://www.dark3d.com/Tutorials/nurbscar/index.asp)



Monster Car Tutorial - by Akira Ota:

http://my.reset.jp/~inu/Tutorials/monster-car/Tutorials-monster_car-01.htm (http://my.reset.jp/~inu/Tutorials/monster-car/Tutorials-monster_car-01.htm)



Basic Car Body Tutorial – by sabaman:

http://sabaman.alfacom.org/carbody-1.htm (http://sabaman.alfacom.org/carbody-1.htm)



Car Hood Vents Tutorial – by sabaman:

http://sabaman.alfacom.org/ventstut.htm (http://sabaman.alfacom.org/ventstut.htm)



Car Grill Tutorial – by sabaman:

http://sabaman.alfacom.org/grilltut.htm (http://sabaman.alfacom.org/grilltut.htm)



Rounded Car Wheelarches Tutorial – by sabaman:

http://sabaman.alfacom.org/arches.htm (http://sabaman.alfacom.org/arches.htm)



Lamborghini Miura Car Modeling Tutorial – by Wyatt Turner:

http://www.synergy3d.net/tutorialdisplay.cfm?tutid=13&page=1 (http://www.synergy3d.net/tutorialdisplay.cfm?tutid=13&page=1)



Car Sideview Lofting Modeling Tutorial – by Wyatt Turner:

http://wtdesign.flashex.com/Lofting_tut2_pages/Loft1.htm?tutid=13&page=1 (http://wtdesign.flashex.com/Lofting_tut2_pages/Loft1.htm?tutid=13&page=1)



Car Splitting Crossing Surfaces Modeling Tutorial – by Wyatt Turner:

http://wtdesign.flashex.com/Crossing_Split_Tutorial_basic/Split_1.htm?tutid=13&page=1 (http://wtdesign.flashex.com/Crossing_Split_Tutorial_basic/Split_1.htm?tutid=13&page=1)



Car Network Surfacing Modeling Tutorial (Part 1) – by Wyatt Turner:

http://wtdesign.flashex.com/Network1-pages/Net1.htm?tutid=13&page=1 (http://wtdesign.flashex.com/Network1-pages/Net1.htm?tutid=13&page=1)



Car Network Surfacing Modeling Tutorial (Part 2) – by Wyatt Turner:

http://wtdesign.flashex.com/Network1-pages/Networksurfaces/details/NetD2-page71.htm (http://wtdesign.flashex.com/Network1-pages/Networksurfaces/details/NetD2-page71.htm)



Clothing & Footwear & Accessories:

Barbutte (medieval iron helm) Tutorial – by Axe:

http://market.renderosity.com/~rhino/axestuts/barbutte/barbuttetut.html (http://market.renderosity.com/~rhino/axestuts/barbutte/barbuttetut.html)



Sunglasses Tutorial – by Axe:

http://market.renderosity.com/~rhino/axestuts/sunglasses/sgtut.html (http://market.renderosity.com/~rhino/axestuts/sunglasses/sgtut.html)



Sunglasses Tutorial – by Spike:

http://market.renderosity.com/~rhino/spiketuts/glasses/glasses.htm (http://market.renderosity.com/~rhino/spiketuts/glasses/glasses.htm)



Running Shoe Tutorial – by Facundo Miri:

http://www.rhino3d.com/tutorials/howto/miri_shoe/shoe_tutorial.htm (http://www.rhino3d.com/tutorials/howto/miri_shoe/shoe_tutorial.htm)



Commands & Interface & Tips:

How to use "Boolean Union" – by Spike:

http://market.renderosity.com/~rhino/spiketuts/booleanunionsurfaces/booleanunionsurfaces.htm (http://market.renderosity.com/~rhino/spiketuts/booleanunionsurfaces/booleanunionsurfaces.htm)



How to use "Boolean Difference" – by Spike:

http://market.renderosity.com/~rhino/spiketuts/booleandifference/booleandifference.htm (http://market.renderosity.com/~rhino/spiketuts/booleandifference/booleandifference.htm)



How to make complex buttons/How to use "BooleanIntersection" – by Spike:

http://market.renderosity.com/~rhino/spiketuts/buttons/buttons.htm (http://market.renderosity.com/~rhino/spiketuts/buttons/buttons.htm)



Complex Blends Tutorial – by Spike:

http://market.renderosity.com/~rhino/spiketuts/blend/blend.htm (http://market.renderosity.com/~rhino/spiketuts/blend/blend.htm)



How to use "Point Weights" – by Spike:

http://market.renderosity.com/~rhino/spiketuts/pointweight/pointweight.htm (http://market.renderosity.com/~rhino/spiketuts/pointweight/pointweight.htm)



How to use "Match Surface" – by Spike:

http://market.renderosity.com/~rhino/spiketuts/matchsurface/matchsurface.htm (http://market.renderosity.com/~rhino/spiketuts/matchsurface/matchsurface.htm)



What to do when Fillets fail? – by Spike:

http://market.renderosity.com/~rhino/spiketuts/whenfilletsfail/whenfilletsfail.htm (http://market.renderosity.com/~rhino/spiketuts/whenfilletsfail/whenfilletsfail.htm)



What are Normals and how to use them – by Modulok:

http://market.renderosity.com/~rhino/modulok/normalstut/Normals/Normals.htm (http://market.renderosity.com/~rhino/modulok/normalstut/Normals/Normals.htm)



How to use "Rotate 3D" – by Modulok:

http://market.renderosity.com/~rhino/tipsandtricks/modulok/rotate_3d_tutorial/rotate_3d.html (http://market.renderosity.com/~rhino/tipsandtricks/modulok/rotate_3d_tutorial/rotate_3d.html)



Belt Clip Tutorial/How to use "Bend" – by Axe:

http://market.renderosity.com/~rhino/axestuts/beltclip/bctut.html (http://market.renderosity.com/~rhino/axestuts/beltclip/bctut.html)



Nature:

Landscaping Tutorial – by Rani:

http://market.renderosity.com/~rhino/rani/landscaping/landscaping.htm (http://market.renderosity.com/~rhino/rani/landscaping/landscaping.htm)



Palm Tree Turorial – by Ryan W. Knope:

http://www.3dluvr.com/content/article/95 (http://www.3dluvr.com/content/article/95)



Landscape with Heightfields – by Ryan W. Knope:

http://www.3dluvr.com/content/article/97 (http://www.3dluvr.com/content/article/97)



Modeling Vegetation – by Ryan W. Knope:

http://www.3dluvr.com/content/article/93 (http://www.3dluvr.com/content/article/93)



Organics:

Dolphin Tutorial – by Haysuess:

http://market.renderosity.com/~rhino/haysuess/organicmodeling/organicmodelingtut.html (http://market.renderosity.com/~rhino/haysuess/organicmodeling/organicmodelingtut.html)



Alien Head Tutorial – by Teyon:

http://market.renderosity.com/~rhino/teyon/ahead/ahead.htm (http://market.renderosity.com/~rhino/teyon/ahead/ahead.htm)



Eye Tutorial – by JMFx33:

http://market.renderosity.com/~rhino/jmfx33/eyetut/eye.htm (http://market.renderosity.com/~rhino/jmfx33/eyetut/eye.htm)



Wing Tutorial – by Darkworld:

http://market.renderosity.com/~rhino/darkworld/wing/Wing_Tutorial.htm (http://market.renderosity.com/~rhino/darkworld/wing/Wing_Tutorial.htm)



Eye Socket Tutorial – by Spike:

http://market.renderosity.com/~rhino/spiketuts/surfacecontrol/surfacecontrol.htm (http://market.renderosity.com/~rhino/spiketuts/surfacecontrol/surfacecontrol.htm)



T-Rex Leg Muscle Definition – by Teyon:

http://market.renderosity.com/~rhino/teyon/trexleg/trexleg.html (http://market.renderosity.com/~rhino/teyon/trexleg/trexleg.html)



Bat Wing Tutorial – by Valander:

http://market.renderosity.com/~rhino/valandar/wing/wing.htm (http://market.renderosity.com/~rhino/valandar/wing/wing.htm)



Arm Tutorial – by Ryan W. Knope:

http://www.3dluvr.com/content/article/100 (http://www.3dluvr.com/content/article/100)



Making a Demonic Warrior's Head – by Ryan W. Knope:

http://www.3dluvr.com/content/article/99 (http://www.3dluvr.com/content/article/99)



Torso from Profile Splines – by Ryan W. Knope:

http://www.3dluvr.com/content/article/98 (http://www.3dluvr.com/content/article/98)



NURBS Head Modeling – by Jeremy Birn:

http://www.3drender.com/jbirn/ea/HeadModel.html (http://www.3drender.com/jbirn/ea/HeadModel.html)



Building a NURBS Hand – by Jeremy Birn:

http://www.3drender.com/rhino/NURBSHAND/index.html (http://www.3drender.com/rhino/NURBSHAND/index.html)



Modeling a Brachiosaurus – by Daniel Ljunggren:

http://www.3drender.com/rhino/dinohtml/index.htm (http://www.3drender.com/rhino/dinohtml/index.htm)



Modeling Trog – by Michael Philbrick:

http://www.3drender.com/rhino/troghtml/index.htm (http://www.3drender.com/rhino/troghtml/index.htm)



Modeling a Monster's Arm – by Jonathan Block:

http://www.mcneel.com/users/boris/rhino/armtut.html (http://www.mcneel.com/users/boris/rhino/armtut.html)

[Rani]

(continue)

Misc:

Faucet Tutorial – by Spike:

http://market.renderosity.com/~rhino/spiketuts/faucet/faucettut.htm (http://market.renderosity.com/~rhino/spiketuts/faucet/faucettut.htm)



Faucet Tutorial – by Dethblud:

http://market.renderosity.com/~rhino/dethblud/faucet.htm (http://market.renderosity.com/~rhino/dethblud/faucet.htm)



Thread Tutorial – by Spike:

http://market.renderosity.com/~rhino/spiketuts/bolt/threadtut.htm (http://market.renderosity.com/~rhino/spiketuts/bolt/threadtut.htm)



How to make Morph Targets for Poser in Rhino – by Spike:

http://market.renderosity.com/~rhino/spiketuts/morphtargets/morphtargets.htm (http://market.renderosity.com/~rhino/spiketuts/morphtargets/morphtargets.htm)



Lighting Tutorial – by loganarts:

http://market.renderosity.com/~rhino/loganarts/lighttut/lighttut.htm (http://market.renderosity.com/~rhino/loganarts/lighttut/lighttut.htm)



How to convert a meshed body figure to a NURBS object in Rhino – by Spike:

http://market.renderosity.com/~rhino/spiketuts/poserfigure/poserfigure.htm (http://market.renderosity.com/~rhino/spiketuts/poserfigure/poserfigure.htm)



From Rhino to Poser Tutorial – by Spike:

http://market.renderosity.com/~rhino/spiketuts/rhinotoppp/rhinotoppp.htm (http://market.renderosity.com/~rhino/spiketuts/rhinotoppp/rhinotoppp.htm)



Beaker Tutorial – by A B Carter:

http://market.renderosity.com/~rhino/abcarter/beaker/beaker_tutorial.htm (http://market.renderosity.com/~rhino/abcarter/beaker/beaker_tutorial.htm)



House Key Tutorial – by Ryan W. Knope:

http://www.3dluvr.com/content/article/94 (http://www.3dluvr.com/content/article/94)



Modeling a Lightbulb – by Ryan W. Knope:

http://www.3dluvr.com/content/article/96 (http://www.3dluvr.com/content/article/96)



Modeling the Mech "Vergos 10" – by Ryan W. Knope:

http://www.3dluvr.com/content/article/101 (http://www.3dluvr.com/content/article/101)



Modeling a Mountain Bike – by Daniel Ljunggren:

http://www.3drender.com/rhino/bikehtml/index.htm (http://www.3drender.com/rhino/bikehtml/index.htm)



Modeling a Sailboat – by Michael Philbrick:

http://www.3drender.com/rhino/boathtml/index.htm (http://www.3drender.com/rhino/boathtml/index.htm)



Modeling a Tank - by Michael Philbrick:

http://www.3drender.com/rhino/tankhtml/index.htm (http://www.3drender.com/rhino/tankhtml/index.htm)



Aircraft Modeling (http://www.geocities.com/SiliconValley/Haven/2470/rhinotut.html) Tutorial – by Steve Sanvito:

http://www.geocities.com/SiliconValley/Haven/2470/rhinotut.html (http://www.geocities.com/SiliconValley/Haven/2470/rhinotut.html)



Cog Tutorial – by Duga:

http://duga4.tripod.com/cogtut.htm (http://duga4.tripod.com/cogtut.htm)



Mushroom Tutorial – by Mike Erickson:

http://www.sumrallworks.com/freebies/rhino/tutorials/mushroom/index.html (http://www.sumrallworks.com/freebies/rhino/tutorials/mushroom/index.html)



Gallic Knife Tutorial:

http://perso.wanadoo.fr/3d/tutorials/knife/knife.html (http://perso.wanadoo.fr/3d/tutorials/knife/knife.html)



Simple Glass Tutorial:

http://members.tripod.com/paintedcanvas/drawing_a_glass.htm (http://members.tripod.com/paintedcanvas/drawing_a_glass.htm)



Simple Shot Glass Tutorial – by Ryan W. Knope:

http://www.geocities.com/SiliconValley/Horizon/4419/shotglass.htm (http://www.geocities.com/SiliconValley/Horizon/4419/shotglass.htm)



Simple Hat Tutorial - by Ryan W. Knope:

http://members.tripod.com/~fyre3d/hat.htm (http://members.tripod.com/~fyre3d/hat.htm)



Chains & Tubular Objects Tutorials:

http://perso.wanadoo.fr/3d/tutorials/splines/index.html (http://perso.wanadoo.fr/3d/tutorials/splines/index.html)



Spring Tutorial – by Dragons Fire Burns:

http://www.geocities.com/rhino3dtutorials/Spring/how_to_make_a_spring.htm (http://www.geocities.com/rhino3dtutorials/Spring/how_to_make_a_spring.htm)



Architectural Column Tutorial – by Dragons Fire Burns:

http://www.geocities.com/rhino3dtutorials/Collumn/how_to_make_a_collumn.htm (http://www.geocities.com/rhino3dtutorials/Collumn/how_to_make_a_collumn.htm)



Roman Arches Tutorial – by Dragons Fire Burns:

http://www.geocities.com/rhino3dtutorials/RomanArch/how_to_make_roman_arches.htm (http://www.geocities.com/rhino3dtutorials/RomanArch/how_to_make_roman_arches.htm)



Spiral Staircase Tutorial – by Dragons Fire Burns:

http://www.geocities.com/rhino3dtutorials/SpiralStairCase/how_to_make_a_spiral_staircase.htm (http://www.geocities.com/rhino3dtutorials/SpiralStairCase/how_to_make_a_spiral_staircase.htm)



Splashing Ball Tutorial – by James Carruthers:

http://www.hydraulicdesign.net/tutorial_splash/ball_tutorial.htm (http://www.hydraulicdesign.net/tutorial_splash/ball_tutorial.htm)



Pipe Tutorial:

http://www.notaw.com/tutorials/pipe/ (http://www.notaw.com/tutorials/pipe/)



Hand Dryer Tutorial:

http://notaw.com/tutorials/dryer (http://notaw.com/tutorials/dryer)



Bottle Cap Tutorial – by Alan-ASD:

http://www.renderosity.com/tut.ez?Form.ViewPages=214&Form.sess_id=38985106&Form.sess_key=1117571754 (http://www.renderosity.com/tut.ez?Form.ViewPages=214&Form.sess_id=38985106&Form.sess_key=1117571754)



Simple Couch Tutorial – by Xurge:

http://www.renderosity.com/tut.ez?Form.ViewPages=74&Form.sess_id=38985106&Form.sess_key=1117571754 (http://www.renderosity.com/tut.ez?Form.ViewPages=74&Form.sess_id=38985106&Form.sess_key=1117571754)



Raised Lettering Tutorial – by OlDog:

http://www.renderosity.com/tut.ez?Form.ViewPages=118&Form.sess_id=38985106&Form.sess_key=1117571754 (http://www.renderosity.com/tut.ez?Form.ViewPages=118&Form.sess_id=38985106&Form.sess_key=1117571754)



A Collection of Forum-Tutorials on Renderosity – gathered by zarth:

http://www.renderosity.com/tut.ez?Form.ViewPages=147&Form.sess_id=39010153&Form.sess_key=1117588877 (http://www.renderosity.com/tut.ez?Form.ViewPages=147&Form.sess_id=39010153&Form.sess_key=1117588877)








Sources:

Renderosity:
http://www.renderosity.com (http://www.renderosity.com/)


3DLuVr
http://www.3dluvr.com (http://www.3dluvr.com/)


3dRender
http://www.3dRender.com (http://www.3drender.com/)


Rhinoceros 3D site
http://www.rhino3d.com (http://www.rhino3d.com/)


3D Cafe
http://www.3dcafe.com (http://www.3dcafe.com/)


Sabaman's Website
http://sabaman.alfacom.org (http://sabaman.alfacom.org/)


Wyatt Turner (wyatt.turner@verizon.net)'s Automotive Design Webpage
http://wtdesign.flashex.com/index.htm (http://wtdesign.flashex.com/index.htm)


Various posts and threads from the Renderosity and CgTalk forums.

[Khorram]

Any useful Plug-ins for Rhino? Any Sources? There are some available at : http://www2.rhino3d.com/resources/

The OBJ converter has been of most use.

[EighthDecay]

on this car-styling magazine they have some zip files for download.

these models helped me understand how to model a car using Network surfaces.

look to the bottom of this page.

http://www.rhino3d.co.jp/seminar/seminar_carstyling.html

from KTYMD
home page= http://www5b.biglobe.ne.jp/~ktymd/

_______________________________________________

and this one is good for understanding some Nurbs basics, for modeling cars
http://www.kotanezu.com/tutorials/modeling1.html

_____________________________________

and this site is also helpful, not tutorials but you can look at the modeling and see the technique and get inspired. Look in the design room for rhino nurbs surfaces.
http://members.at.infoseek.co.jp/matchacci/home.htm

[Rani]

Here's another link about scripting in rhino:

A detailed guide for scripting - by David Rutten:
http://www.reconstructivism.net/PDF/Scripting_Handout.pdf (http://www.reconstructivism.net/PDF/Scripting_Handout.pdf)

[Rani]

Here are some more tutorials I stumbled upon (note that you need the FREE adobe acrobat reader program to read the PDF files, also note that some people can't see the PDF's in their browser even if they have the acrobat reader, in that case right mouse-click the link and select 'save as...' and save it on your hard disk and open the file from their):







Advanced Techniques/Shapes & Scripting:



How To Make Tricky Pipes – by Prodag:
http://www.prodag-3d.com/firststage4.html (http://www.prodag-3d.com/firststage4.html)


How To Make a Rope/Upholders (or just any other twisted surface) – by Prodag:
http://www.prodag-3d.com/firststage3.html (http://www.prodag-3d.com/firststage3.html)


How To Save Time In Modeling – by Prodag:
http://www.prodag-3d.com/firststage6.html (http://www.prodag-3d.com/firststage6.html)






Clothing & Footwear & Accessories:


Modeling a Snake Bracelet – by Antonio:
http://www.amdpiu.com/pdf/31eng.pdf (http://www.amdpiu.com/pdf/31eng.pdf)



Modeling a Bracelet – by Antonio:
http://www.amdpiu.com/pdf/11eng.pdf (http://www.amdpiu.com/pdf/11eng.pdf)




Modeling a Watch – by Duga:
http://web.1asphost.com/Longsbi/animapp/timetellertut03.pdf (http://web.1asphost.com/Longsbi/animapp/timetellertut03.pdf)


How To Model Sunglasses – by Duga:
http://web.1asphost.com/Longsbi/animapp/sunglastute.pdf (http://web.1asphost.com/Longsbi/animapp/sunglastute.pdf)

Organics:



Modeling a Fish – by Antonio:
http://www.amdpiu.com/pdf/23eng.pdf (http://www.amdpiu.com/pdf/23eng.pdf)

Misc:

Gems Cut Models – by Antonio:
http://www.amdpiu.com/pdf/32eng.pdf (http://www.amdpiu.com/pdf/32eng.pdf)

Custom Icons Tutorial – by Antonio:
http://www.amdpiu.com/pdf/22eng.pdf (http://www.amdpiu.com/pdf/22eng.pdf)

Modeling a Washbasin - by Antonio:
http://www.amdpiu.com/pdf/21eng.pdf (http://www.amdpiu.com/pdf/21eng.pdf)





Modeling a Coca-Cola Bottle – by Antonio:
http://www.amdpiu.com/pdf/12eng.pdf (http://www.amdpiu.com/pdf/12eng.pdf)




Propeller Tutorial – by Prodag:
http://www.prodag-3d.com/firststage5.html (http://www.prodag-3d.com/firststage5.html)




How To Adjust References – by Prodag:
http://www.prodag-3d.com/firststage.html (http://www.prodag-3d.com/firststage.html)



Tracks Tutorial – by Prodag:
http://www.prodag-3d.com/firststage2.html (http://www.prodag-3d.com/firststage2.html)






Sources:
3DCommune (http://www.3dcommune.com (http://www.3dcommune.com/))
Prodag's Website (http://www.prodag-3d.com (http://www.prodag-3d.com/))

[giant551]

This is a 4 part product visualisation video tutorial on modelling a USB data stick. It takes you from making the first curve all the way to setting up a basic scene with flamingo. you will have to register with 3d palace to download it. The tutorial can be followed by a beginner to Rhino, i hope you like it and any feedback would be most welcome

USB datastick tutorial (http://www.3d-palace.com/video.php?vid=80)
Paul

[MEITRIX]

thank you for all the links, they are really helpful. but takes a long time to download.

[tilite]

a great collection of tutorials i just found

this is a must to check out
http://www.huntfor.com/3d/tutorials/rhino.htm

I'll get round to updating this thread soon if you guys are ussing these tutorials?

[Dias]

Hi guys

I've made few videotutorial that you can find very useful. There are on treddi.com, I think that you have to register in order to download them. Anyway there are the links:

Fillets (http://www.treddi.com/forum/index.php?showtopic=5716)

http://www.treddi.com/forum/uploads/post-1-1114459081_thumb.jpg



Rims (http://www.treddi.com/forum/index.php?showtopic=3862)

http://www.treddi.com/forum/uploads/post-1-1109535654.jpg

[PRIIMO]

Thx Dias for tutorials
and i see there are very good rhino tutorials but the most are written in spain and translators cant translate them.Have some suggestions how to translate

[smoluck]

no one knows were I can find Rhino tutorials in french in Car Modeling ?

[PRIIMO]

Why nobody can create rhino video tutorial modeling a car using blueprints?
Because now there is only concept cars tutorials on the internet.
Someone help us rhino newbies.I see a lot of good cars made by rhino but no good tutorials.
please create some.
thx

[SpinCad]

Here is a methodology for making a concept car in rhino

http://www.etereaestudios.com/docs_html/nixus_htm/nixus_makingof_index.htm

[PRIIMO]

thx for the link,
but like i said its a concept car,and i need video or good explanation tutorials on making car that is alredy created.
thx

[scrimski]

Why?
Set up your references and go for it.
A tutorial is about how to do, how to create something, not about what to create, so the subject of the tutorial doesn't matter at all.

If you have problems with solving specific problems, you can ask here.

[PRIIMO]

when modeling not a concept car i dont know from where to start what curves is most needed to build a basic car shape,i dont need very detailed car tutorial but the one which explains how to draw curves make a basic shape that i could see the main techniques what is used to do it
Im new in rhino so i dont know this program very well and there isnt many tutorials for newbies
in rhino,all are hard written.So thats why im asking for video tutorial that i could understand most things in rhino.
Thx

[EquiNOX]

Dias I can't register for this tutorial... this keeps loop back to forum after reading agreement to term and condition. Any idea why? can you zip this tutoiral here?

[glennyong]

some of the links are not working.

i was thinking of reading up on the lightings part. but the link was not working.

[Cayn]

Great tuts Dias. Thanks for sharing. Links worked fine for me.

Thx Dias for tutorials
and i see there are very good rhino tutorials but the most are written in spain and translators cant translate them.Have some suggestions how to translate

Priimo tutorials are in intalian not in spanish. This way u can't translate them using a spanish translator.

[EfrenStudios]

Some tutos are great... but the most, are forbidden.

[tilite]

When I get some free time I'll clean these links up. If to many links are down then we just need to post more to overcome that fact :)

[Khorram]

I had no time to check if this link is included here. Sorry if it's been there in this thread.
Anyway some may find it helpful.

http://www.caddigest.com/subjects/rhino/tutorials.htm

[saiko]

I had no time to check if this link is included here. Sorry if it's been there in this thread.
Anyway some may find it helpful.

http://www.caddigest.com/subjects/rhino/tutorials.htm

nice link !

thank u :)

[Khorram]

More stuff about Rhino could be found in Caddigest.com, usually updating. And it's been updated.

You may want to subscribe to their newletter.

http://www.caddigest.com/subjects/rhino/index.htm

[TedKyte]

Why nobody can create rhino video tutorial modeling a car using blueprints?
Because now there is only concept cars tutorials on the internet.
Someone help us rhino newbies.I see a lot of good cars made by rhino but no good tutorials.
please create some.
thx
Hi Primo....

Try here, there is a car tutorial.
http://www.rhino3d.tv/english/info/subcategory.php

If the link wont take you right there start at rhino3d.tv

[Smasher]

I have written a couple of nice tutorials and you can find them here (sorry if this looks like self-marketing, but I really just like to help)

http://www.rhino3dhelp.com/tutorials/modeling-creative-speaker/
http://www.rhino3dhelp.com/tutorials/modeling-kent-hair-brush/
http://www.rhino3dhelp.com/tutorials/modeling-car-rim/
http://www.rhino3dhelp.com/tutorials/modeling-cinch-connector-tutorial/
http://www.rhino3dhelp.com/tutorials/modeling-slide-rule/

For each text tutorial, there is a video tutorial...
There are new tutorials comming every week

[saiko]

this site is a great initiative man!
keep it up! :)

[parel]

http://pareldesign.blogspot.com/2008/05/blog-post_01.html

Its not very polished, but I thought it would be more helpful to have a more real-time walk-through of modeling and sketching. I am still in the process of actually designing the lacrosse stick , so I have posted underlays and sketches on my blog if anyone is interested in pitching a concept or two.
Comments appreciated as I am still in the process of making the videos. Not sure if the stuff is boring and need some classier editing or not. It is easy to do straight screen captures with CamStudio (free opensource capture software) but I dont have much editing capabilities.
Hope this is useful.

[TadMadLad]

Hi

Does anyone know of a good tut on Polygon/meshes? I think I'm OK with curves & surfaces, but looks like I need to get familiar with these litle b....

[saiko]

Rhino is not a Polygon modeling platform.
Modo (http://forums.cgsociety.org/forumdisplay.php?f=141) is a dedicated polygon modeling application. You may try 3DS Max, C4D, Maya also.

Wings 3d and Blender are great free alternatives to explore polygon modeling.

Hope this helps.

[TadMadLad]

Thanks again!

Looked at Blender. Maya etc too much time right now. Wings 3d seems too basic.
So Thanks again - might be asking questions on mesh modeling soon!