PDA

View Full Version : PA Challenge - Vehicle/Landscape - Wintermute


Wintermute
02-06-2002, 10:38 AM
here's a vehicle concept sketch...scrap rig
built from scavenged metal parts etc...steam powered..

http://homepage.mac.com/jr_design/scrap_rig.jpg

Landscape will be a global nuclear winter, about 30-40 years after all hell breaks loose.

Howard Day
02-06-2002, 12:26 PM
Nice start. Wanna race to the finsh line? :)

Wintermute
02-07-2002, 01:30 AM
OK..here's a start on the 3D end, there's still a LOT to go (obviously), built so far: cab, sleeping quarters, frame, boiler, and water tank, (it's steam powered, plenty of snow on the ground so water's no problem.

crits?
http://homepage.mac.com/jr_design/scrap_rig-early.jpg

jrockstar
02-07-2002, 09:23 AM
I like the shabby look you gave it in your sketch ;)

Keep on working ... I’m sure it’s going to be awesome

Wintermute
02-08-2002, 04:49 AM
ok...it's been a little while, but here's a small update.

this is the front "axle" of my scrap rig, I still need to model a pair of heavy chains to loop around the gears on the wheel hubs and the steering column.

any suggestions on a quick way to do that? (LW7)

enough! on to the pic!!
http://homepage.mac.com/jr_design/scrap_rig-front_axle.jpg

jrockstar, I'm working on it :D

Henrik Hörlin
02-10-2002, 02:52 PM
Yo! Nice work!
Like the concept.
For the chain: If using Maya: Make one link and duplicate with transform culd get you straight peices of chain. Or you culd try animated snapshot if you want all of it in one go. :D
keep it up.

Wintermute
02-11-2002, 03:08 AM
here's an update on my scrap rig.

http://homepage.mac.com/jr_design/scrap_rig-new.jpg
http://homepage.mac.com/jr_design/scrap_rig-wheels.jpg

still a long way from finished-crits?....suggestions?........flames?

:D

JacobB
02-11-2002, 03:58 AM
very cool design,I like the wheels on the back and on the front, but what kind of cover are you going to put on the front of the motor, I t'd be kinda cool if you used something like a clothes dryer door or some thing weird like maybe a compact car hatch back door??looking forward to seeing updates:D

Wintermute
02-11-2002, 06:57 AM
I'm actually planning on leaving the engine open on the front, but the idea of having something like the rear hatch from a small car, like a (new) beetle, or a honda civic on the front is rather amusing. :D

if I don't cover the engine (which is a diesel engine converted to operate under steam power), I'll probably model a new on as this one feels kinda weak.

Capt Lightwave
02-16-2002, 12:09 AM
I really like the idea of this scrap-vehicle.
Since I'm a big fan of the old Mad Max movies, this is absolutely "my cup of tea"....

Haldir
02-17-2002, 02:21 PM
KUDOS!!!

That's one tight lookin' vehicle...If you ask me I'd say it's done, cept texturing. I like the "Junkyard Manufacturing" feel that it has.

Keep it up...And good luck.

http://www.cgtalk.com/showthread.php?s=&postid=17808#post17808

Wintermute
03-09-2002, 11:54 AM
well, here's what I ended up with for this challenge. Textures will have to wait for another day.

http://4.35.28.127/~joe/scrap-rig-final.jpg

this vehicle was built shortly after the nuclear holocaust. anything flamable has been used to fuel the boiler, for the steam engine. This includes the rubber tires. Equipped with steel paddles on the drive wheels, and skis for steering, the Scrap-rig gets around the snow covered terrain without much difficulty.

CGTalk Moderation
01-13-2006, 01:39 AM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.