PDA

View Full Version : F1 Models, Panda Lee (3D)


lipanda333
08-26-2004, 12:21 PM
http://www.cgnetworks.com/gallerycrits/87968/87968_1093519276_medium.jpg (http://www.cgnetworks.com/gallerycrits/87968/87968_1093519276.jpg)

Title: F1 Models
Name: Panda Lee
Country: P.r.china
Software: 3ds Max

Enjoy:)


1
http://61.187.55.84/images/upload/2004/08/20/80591105.jpg

2
http://61.187.55.84/images/upload/2004/08/20/17488984.jpg

3
http://61.187.55.84/images/upload/2004/08/20/54341628.jpg

4
http://61.187.55.84/images/upload/2004/08/20/41433836.jpg

5
http://61.187.55.84/images/upload/2004/08/20/16268055.jpg

6
http://61.187.55.84/images/upload/2004/08/20/21504050.jpg

7
http://61.187.55.84/images/upload/2004/08/20/86482775.jpg

wire
http://61.187.55.84/images/upload/2004/08/20/97989508.jpg

AshtonWoolley
08-26-2004, 04:35 PM
Hey, I cant beleave i am the first to reply to this threat "W00t!".

Best F1 Car i have ever seen, This is amazing man!

Well done grate efforts! to bad it was 3D's MAX "GO MAYA"

How long did it take to render did you use software render? or did you use v-ray? etc.

Tell us a bit more about it.

Front page for sure.

ASW

GTR
08-26-2004, 05:32 PM
Great detail and mapping. excellent renders!!!:thumbsup:

JohnnyRandom
08-26-2004, 05:44 PM
Great attention to detail:D like the Ferrari emblem, layered spokes, nice, "real" mirrors;) , freakin clean, the B&W's don't do your textures justice, IMHumbleO a little under-exposed.
Great work
BTW curious, what renderer? (hehe, not that it really matters,ne1 who knows their render engine well enough can nearly emulate any other renderer)
Thx for sharing...

ACantarel
08-26-2004, 09:07 PM
Very nice modeliong & shading!

Looks like a very accurate model of the ferrari!

André

Obizzz
08-26-2004, 09:27 PM
really nice, that damn car is always first over the line too ;)

you should render them out with less noise when you get the time, other than that almost perfect!

inpryce
08-26-2004, 10:33 PM
Amazing!

Great modeling, this f1 is the best I've ever seen.

Regards.
Inpryce.

ejholmes
08-26-2004, 10:36 PM
WOW! Absolutely stunning, i love the detail in the rims and tires, very nice. What kind of lighting setup did you use?

lubiya
08-26-2004, 11:13 PM
Great job man, no comments...

Wintermute
08-27-2004, 12:21 AM
considering I'm not a huge fan of the F1 cars...this absolutely rocks!
it's the little details that make it more "real" such as the the fact that the emblems/decals don't perfectly line up across panel seams (like the shell logo on the side pod), like the panel has been removed and replaced,but tightened down differently so they don't line up..adding history to the model.
--we can all learn from that detail!

there is one thing that bugs me though...
the suspension arm for the right front wheel doesn't seem to be connected to the nose of the car (the angle arm to the internal shock)

you can see this on the front view as well as the overhead view from the right of the car.

other than that.. PERFECT
:beer:

Troy McClure
08-27-2004, 12:28 AM
:eek: Absolutely perfect, the best F1 I have ever seen... :eek:
Incredible details, I love it:love:
5 star for me

lipanda333
08-27-2004, 06:02 AM
thx all.I rendered it by final render.
I spent over 4 hours on doing the render
waiting ur more advice.

Ls3D
08-27-2004, 07:59 AM
Nice Job!

Maybe a bit aliased in high contrast areas like the spoilers - are those XM sat radio receivers?

-S

Sqwall
08-27-2004, 08:00 AM
Very Nice. I am not a fan of Ferrari Team but this one is great. I thing some materials should be reworked , like the one of the rims :p Great work man ....

kinich
08-27-2004, 08:04 AM
WOOT ! nice..





but look at picture 4.... left front wheel... one of the suspencion metals (???)) does not reach the noby, like on the other side.. it just.. floats... its missing that shinier metalic part like on the right wheel..



stil! WOOT!

RaileR
08-27-2004, 08:36 AM
i'm glad to see that such good work has been done in MAX ;)
i love ur work, especially the tires. they look awesome, like all other package.
GO FERRARI ! :D

PeterSanitra
08-27-2004, 08:59 AM
Stunning texturing work.

MuzzzY
08-27-2004, 10:13 AM
good modelling. Perfect :eek:

Proteo
08-27-2004, 10:25 AM
nice!! :thumbsup: , one of the best F1 models for me!

turx
08-27-2004, 10:36 AM
top notch modeling!
and materials are just great!

Supervlieg
08-27-2004, 10:44 AM
Great model! I think the detail is excellent. The tyres look very convincing.

Best F1 model in along while. How a bout a composition on a photo?

Pegasus
08-27-2004, 11:17 AM
this looks amaizing.

Perfect Job! :-)

Do you have any online portfolio, webpage or something.

Cant wait to see more of your work

Pegasus.

MaximilianPS
08-27-2004, 11:22 AM
Just to be perfect.. the weels, maybe are a little bit too shini :)

man u do a great job, realy clean model, great texture and near to perfect light :D
i like the "draw-like" style

that's perfect for me :bounce: :thumbsup:

superlayer
08-27-2004, 11:59 AM
Wow amazing.
I especially like the texture on the wheel and the carpaint!!

Amazing, where are you from in China?

phoenix
08-27-2004, 12:00 PM
very impressive work ...

hey btw i liked ur max screen shot ... whats that ..

SiWenBaiLei
08-27-2004, 01:55 PM
I like it

so good ~

WhiteBlaizer
08-27-2004, 01:58 PM
EXCELLENT! :thumbsup:

The best f1 car i have ever seen.

ENIAC
08-27-2004, 02:40 PM
model is perfect and rendering is really cool

well :) The best f1 car i have ever seen also

brogh
08-27-2004, 05:44 PM
Absolutely fantastic, the model is really good made, materials rock, the only thing i'm disappointing is the tyre shader, wich i don't like so much.

Cheers:applause:

Mojo Rizen
08-27-2004, 07:52 PM
Impressive, most impressive

madart
08-27-2004, 07:57 PM
Absolutely beatiful! I have to agree with some of the others that this is the best 3D F1-car I've ever seen. Great modelling, texturing, rendering and great work on the shaders. The tyres really do look like rubber!

Now for a little critique... the mirrors are a little dark in their shadows or a too shadowy/dark. The interiors in the monocoque (chair and steering wheel) could do with another shader/terxtures. All in my opinion of course. The black bottom of the car that you can see clearly at the rear of the car, doesn't quite look real somehow.

Apart from these details, absolutely fantastic work!

About the suspension.... maybe time for the mechanics to get to work ;-)

unwrap
08-28-2004, 12:08 AM
Absolutely amazing! :buttrock:

Xplorer
08-28-2004, 01:02 AM
Very good, well done! :thumbsup:

nDman
08-28-2004, 01:29 AM
Super !!! :bounce:
Welldone :thumbsup:

Can You Expline carpaint shader? Please.

Nerra
08-28-2004, 12:09 PM
This awesome! no doubt. These are the kind of things that make you feel all warm inside about CGI. When ever i see it, i just wanna go model :).

EXCELLENT!

maxFX
08-28-2004, 04:49 PM
Top artwork! Frontpage well deserved!

A like the detailing on your F1 Car very much!.Cleary demonstrating MR's + 3Dsmax power, and the texturing is top-notch! I dont got any crits exept for a more "rubber" feeling on the tyres...how about that?

And a photo composition would be awesome :)

onnevan
08-28-2004, 06:13 PM
I love the model although I prefer renaults:). The only thing that I donīt like are the tires which I think are too shiny and make them look like plastic instead of rubber(donīt know if this word is correct for tires).

Very good job.

sculpter21
08-28-2004, 07:02 PM
Can some one please explain how you guys do the bad ass car paint like that

EBOLII
08-29-2004, 04:32 AM
wow those are some very and I mean very impressive captures! well done :buttrock:

joostingh
08-31-2004, 01:02 PM
Very nice.

The wheels are suberb and the texture seems to be pretty good to. Only the Marlboro logo on the airbox and rearwing aren't right. And I think that the sidepod it a litle to round but that I don't know for sure.

JW

Darth Polygon
09-01-2004, 09:37 AM
Lovely work. Great attention to detail. I especialy like the tyres as always seems to be the one area people critizise the most but yours are spot on.

The model is missing one crucial element...a 7 times world champion!!!

FORZA FERRARI!

Orion71
09-01-2004, 07:35 PM
great job! my only small crit is that some of the logos appear unnatural, like they are sitting flat on the curved surfaces. maybe slightly shade areas of them to simulate being rounded.

o

Gorgonzola
09-02-2004, 03:52 AM
brilliant!

however, one thing i noticed....

is it just the way im looking at it or is the suspension bar on the front corner (the rod that goes from the bottom of the hub up to the suspension inside the nose) not lined up properly?

it looks like the silver piece that goes through the shell is sitting too high, and not connected to the rod at all.

apart from that, absolutely fantastic! :)

Wijn
09-02-2004, 03:57 AM
Wow, this is one of the best F1-models i've seen! Although i could just repeat al the complements of everybody, as one of the biggest F1-fans around , i must give a little criticism. The sidepods of the F2003-GA are not as round as they are in your model. The shaders used for the rubber material aren't completely realistic as well, they give a bit of a plastic idea. The wheelaxis could use a bit more detail, as it has to be putten on and off real fast during a pitstop. Currently in your model it doesn't have the right geometry to fit the tools that are used for that if you know what i mean.I also think the T-cam is a bit to exaggerated, it should be a little less 'raw'.

But nevertheless, this is really an awesome model and render, and i wish i could do the same.
I'd love to see more of your work!

Pelice
09-02-2004, 07:26 AM
Excelent job!

the details of tires are fantastic!!

erix
09-02-2004, 08:46 AM
Very nice F2003-GA!
Don't worry about the rubber, it looks perfect to me. F1 tyres shine a bit like plastics. The rims are perfect as well.

The model looks great though some little things need attention.

-On the right side of the car just above the E sticker there's a little round handle, inside the last O of Marlboro. It starts the internal fire extinguisher (that's what the E stands for).

-About the Ferrari logo on the tip of the nose, isn't that just a sticker? If it was a plate it would kill the aerodynamics of the car ;)

-The inside of the airintake has a flat bottom, it doesn't follow the curve of the outside.

Maybe I'm just picky but this car looks so great it just needs these details to be perfect. Joostingh is right about the Marlboro logo's. They are tricky, believe me, I know.

fleety
09-02-2004, 09:06 AM
outstanding wheels, how much post time was spent on those? and where did those textures enter your posession?

fleety
09-02-2004, 09:13 AM
what is that guy talking about...'go maya!'
who needs Maya when you can use studio max like that, pointless. You carry on. MAX to the MAX.

Aragorn26282
09-02-2004, 05:51 PM
That's...real!

When I see the model the first time I thought it was a picture, but at the end I see the wireframe screenshots and...wow!

Great!


It's is when I see such models that I'd want to abbandon my 3d activity...

Madc0re
09-02-2004, 07:19 PM
Wow good work, probably the best F1 iv'e seen in 3d......Good job

Nice render

jasonbowers
09-05-2004, 11:23 AM
Jolly nice modelling there..... excellent subject matter too :)

I must say the treatment of the paint looks very nice indeed and I too like the nice touch of mis-aligning the panels so that the decals apear slightly off... nice one.

a.

Nazirull
09-28-2004, 08:34 PM
When can I have the key??:D

crossman
10-02-2004, 12:30 AM
i think that looks so good that F1 should start makeing there cars like that ! :bounce:

sanshi
11-16-2004, 09:12 AM
Very nice modeliong & shading!

pixeloddity
11-29-2004, 09:30 PM
Very nice modeliong & shading!

Looks like a very accurate model of the ferrari!

King555
06-27-2005, 05:28 PM
很高兴能在这里看到老兄你的作品,太棒了!很美啊!
(It is very happy to see the your work in here, too stick! Very beautiful!)

CGTalk Moderation
06-27-2005, 05:28 PM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.