CGTalk - Above & Beyond - Vehicle/character

rolhionjs

08-06-2002, 05:43 AM

hihihi :) thanks guys :) . Well as i use Lightwave, i just did that quickly. (5 minutes) using the subpatch method and tools like smoothshift, bevel, dragnet.

In fact, it will be a kinda big flying thing, and this part, is just the front of it. Eh guys its just the visible iceberg part for now ;)

more to come ;)

angel2k

08-06-2002, 10:16 AM

T'es bien parti strike :) :thumbsup:

ca va encore faire mal :insane:

rolhionjs

08-06-2002, 11:29 AM

ok, here's another part of the vehicle : the top of the vehicle

http://www.designpicture.com/images3Dversion/challenge6_001.jpg

erilaz

08-06-2002, 11:31 AM

Almost looks like it's made out a huge amount of stylish bicycle seats!:p

Great look!

angel2k

08-06-2002, 11:38 AM

Hum.. it's strange.. for the moment I can't see where is the "home made" in this. Let's wait for more details :)

Go go strike !!

rolhionjs

08-06-2002, 12:50 PM

http://www.designpicture.com/images3Dversion/challenge6_002.jpg

Foloking

08-06-2002, 01:29 PM

wééé cool, j'aime bien le style de ton model :D
Bon Début Strike! Et bonne chance pour la suite :wavey:

Elf

08-06-2002, 01:59 PM

:eek: cant wait to see where this goes

Taoizm

08-06-2002, 05:21 PM

Keeping an eye on this one, cuz it looks cool.

Remember though. It has to be homemade looking, and seat no more than 4 people.

rolhionjs

08-06-2002, 05:51 PM

well thx :)
Taoizm : ;) let's see later about the household made :)

last render :

http://www.designpicture.com/images3Dversion/challenge6_003.jpg

and the wireframe :

http://www.designpicture.com/images3Dversion/challenge6_003wire.jpg

MikaelPersson

08-06-2002, 05:52 PM

I´d say old plow seats, around 1940-50. Not bicycle.
But if you salvage an old jet engine, aren´t you allowed to use it? Hi-tech gear found out in the open should be allowed. Or?

Elf

08-06-2002, 06:15 PM

i agree mikael p. a jet engine found in a junkyard should be ok, a long as it seems a bit messed up

rolhionjs

08-06-2002, 10:18 PM

http://www.designpicture.com/images3Dversion/challenge6_004.jpg

Hmm... As Wiro said in the rulez thread addendum, we can do anything SF as long it doesn't look like to a factory stuff.
So let's go :)

Russo

08-06-2002, 10:22 PM

You're doing well Mr. Strike, :scream:

otacon

08-06-2002, 10:26 PM

It has that style that only you can achieve.:thumbsup:

MikaelPersson

08-06-2002, 11:35 PM

Looks interesting, where are the pilot going to sit? How large is this compared to him/her.

Elf

08-07-2002, 12:23 AM

can you plz post some concept sketches?:shrug:

Koma

08-07-2002, 02:10 AM

salut mon pot strike ,he he ton modelling est super ,lets see what your brain is cooking:thumbsup: :eek:

ZrO-1

08-07-2002, 02:22 AM

That's looking quite interesting Strike. You are definetly off to the best start out of all of us.

rolhionjs

08-07-2002, 09:23 AM

Ok guys :)
Well no sketchs sorry, but here is some explanations about the future T-FIGHTER-006 . Some of old stuffs to build it. Here's just the front part. Soon will come the main wings, propulsor, pilot cockpit.

http://www.designpicture.com/images3Dversion/challenge6_006.jpg

erilaz

08-07-2002, 09:42 AM

Aww... heck! That's brilliant STRIKE!!:eek:
You're hooning along in this challenge!

dodo3d

08-07-2002, 11:51 AM

:buttrock:

as usual really nice modeling strike but I think it's far from the challange idea cause it's seams like an alien or futuristic ship may be I am wrong but it's still wonderful disgen keep going

rolhionjs

08-07-2002, 01:19 PM

ok, so let's imagine we're in 3050 A.D., in a junky yard. Some people for some reasons, decide to make a craft to fight against some other people. They take all the thing they need to build it : Old engines, old helix, everything that can be able to build a craft. It's home made no ?

http://www.designpicture.com/images3Dversion/challenge6_007.jpg

Clanger

08-07-2002, 01:25 PM

I'm convinced it fits the topic. Sci-fi is in the rules just not space travel.

Elf

08-07-2002, 02:01 PM

now your flying machine is clearer to me:p , i really like it, nice modeling:thumbsup:

Klasz

08-07-2002, 02:10 PM

Désolé de vous importuner...je ne suis certainement pas dans le bon topic..et en plus c'est mon deuxieme post..

Tout d'abord Strike tu as des talents de modélisation vraiment impressionnants...pour le challenge de juillet, que tu as laissé tomber un peu tôt je trouve, tu étais à mon avis un des , sinon le meilleur jusqu'à un certain point...
Pour ce challenge, bien que ta vitesse d'execution soit réellement impressionante ainsi que ta virtuposité, j'ai un peu peur que tu soit un peu hors sujet...mais je pense que si tu relit juste une fois le topic des rules, en deux coup de cuillere à pot ça va etre reglé avc toi...Tu te laisse à mon ttres humble avis un peu trop emporter par tes facilités et ton plaisir, qui se ressent d'ailleurs....Peut etre que je me trompe completement, mais bon, c'est mon avis a l'heure ou je parle....Sinon c'est clair que pour l'instant tu es largement en avance mec...!!!! et j'adores ce que tu fais...bon

Sinon, deuxième question: OU EST CE QU ON VOIT LES GAGNANTS DES CHALLENGES PRECEDENTS ????????!!!!!!!!! Y A UN TOPIC ???

@++++

angel2k

08-07-2002, 02:34 PM

P47 ?? Huhuhu ^^

Stephan

08-07-2002, 02:57 PM

Looks very cool...

swag

08-07-2002, 04:27 PM

slow down .::STRIKE::. :bounce: i like the organic style

08-07-2002, 04:42 PM

GASP! u have complete the challenge in 3/4 days!!!!
u are able to make an army!!! SAF!!! .::STRIKE::. AIR FORCES!
Well....amazing good job!Sweet style!

:thumbsup:

TES

08-07-2002, 04:47 PM

I like it rally much!!great style

rolhionjs

08-07-2002, 04:50 PM

OZ : oh no ! ;) not completed yet !

swag : i do my best ;)

angel2k : héhé va chercher dnepr qu'il voit son hélice :)

Klasz : vi je comprends, mais c'est pas fini !! laissez le temps faire les choses ;)

thanks for all your comments

Here's the following things...

http://www.designpicture.com/images3Dversion/challenge6_009.jpg

Elf

08-07-2002, 04:54 PM

WOAH, its really shaping up, beatiful modelling, so much detail, i dont really like the X supports things beetween the wings, but that may be just me:shrug: , its amazing:applause: :applause: :applause:

otacon

08-07-2002, 05:03 PM

Man your fast! IT looks great too. :D

Elf

08-07-2002, 05:07 PM

is it just me or does this have a slight resemblance to a X-wing?:p

MikaelPersson

08-07-2002, 08:59 PM

That will make a interesting ship. But I think you should be careful to not overcrowd it with detail. The scrap found in 3050 is hard for us 2000 people to read. We dont imediately see what it is. That is resulting in a confusing model.
You will have no problem handling that. But I do think you will have to consider it.

rolhionjs

08-07-2002, 09:37 PM

another view with a tiny composite under photoshop.

Thanks for all your comments.
Mikael P. : i'm not sure to understand well ... Where do you go saying that ?

http://www.designpicture.com/images3Dversion/challenge6_010.jpg

erilaz

08-07-2002, 09:54 PM

Wow stike, like Oz said, looks like you're almost done!! (even though we all know you're not!!)

I love the old photo look! Really gives a sense of junkyness.

AroundTheFur

08-07-2002, 10:00 PM

get rid of that sail on the top, didnt u ever take physics? and speaking of physics for some reason im having trouble believing this thing could get off the ground.....

Elf

08-07-2002, 10:53 PM

aroundthefur the entries dont have to be realistic, i personnaly like the sail, strike can add a really cool insignia to it:thumbsup:

rolhionjs

08-07-2002, 11:03 PM

euh aroundthefur.. do you think mary poppins could fly with an umbrellla ? ;)

Just to talk about this point, i would say : A homemade thing is often a stuff full of contradiction, in one word : rarely perfect. That's the point of the topic too no ? unperfect, old, used, and hand made.

08-07-2002, 11:26 PM

U got great style in rendering!! and a lot of artistic view!!!ROX!:buttrock:
i think that Mikael P. mean that too much detail may cause a confusion FX.and the shape of an object may be hidden .I agree this opinion ............however i think that ur object have loads of datails but not make confusion!iT LOOKS GREAT......:buttrock:

Aura

08-08-2002, 02:45 AM

Really great!!!!!!!!!!!!!! Really great!!!!!!!!!!!!!!
:applause: :applause: :applause: :applause:

angel2k

08-08-2002, 06:54 AM

Je l'ai "appeauté" :)

Je pense que ce que veut dire Mikael P. c'est qu'ajouter trop de détails à un objet fait en 3050 va le rendre difficile à comprendre [appréhender ?]. La compréhension n'est pas immédiate d'où ensuite confusion ?

Les bilingues ?? J'ai bon ?

MikaelPersson

08-08-2002, 09:59 AM

Yes, OZ did get me correctly. I will try to explain in clearer words.

You have a clear idea in your mind about what each of the pieces are (in your ship). But as you have made a futuristic design, we who can´t read your mind, are having a harder time. You have to make it clear what each piece is. With a design that really communicates that.

:surprised ?? am I making myself clear? anyway. That old photo of yours did sure look nice.

cyroz2000

08-08-2002, 10:38 AM

Salut Strike,
je trouve ton modele superbe et totalement dans le cadre du challenge.
Le fait d'avoir autant de details est super, c'est vraiment du rafistolage et on se demande meme s'il ne risque pas de se disloquer au premier envol!

:applause: DU GRAND ART! :applause:

rolhionjs

08-08-2002, 10:43 AM

well thanks all :)

MAybe you're right about the fact this thing is too detailed, or not really in the challenge topic... hmmm... i think i'll use it later for the final scene, but for now, let's start something different :

http://www.designpicture.com/images3Dversion/challenge6_2_02.jpg

rolhionjs

08-08-2002, 11:51 AM

http://www.designpicture.com/images3Dversion/challenge6_2_03.jpg

AroundTheFur

08-08-2002, 01:53 PM

well i personally dont like the first one, but thats just me. i dont think home made means it has to have mistakes, i think it just needs to look 'put-together' by hand and not machine, which urs doesnt fit.

Wiro

08-08-2002, 02:30 PM

I aggree with Mikael P. about the crowdedness. The old design looked a bit too inconsistent and as he said I don't think people can relate to the parts used (except for the sails, propellers, etc).

But the second design now...wow nice render! This one is easier to relate to and already looks very interesting! I'd go for that one myself

Wiro

rolhionjs

08-08-2002, 02:36 PM

well... ok, i agree it's not so easy to relate some parts... So that's why i'm doing another model this time more "handmade" : a balloon, a boat, and some others stuffs not yet here.

But for then final scene, i think i'll use my first model. for example : the little boat beeing chase by the T-fighter, or this kinda thing ;)

thx for the comments.

Antera

08-08-2002, 04:22 PM

Just my first post, i like the modeling a lot, just it looks a bit overloaded to me.

rolhionjs

08-09-2002, 06:13 AM

http://www.designpicture.com/images3Dversion/challenge6_2_04.jpg

rolhionjs

08-09-2002, 09:57 AM

http://www.designpicture.com/images3Dversion/challenge6_2_05.jpg

MikaelPersson

08-09-2002, 11:13 AM

Homemade by Da Vinci?
You´ve got a nice shape on that boat. The front view looks really interesting.
Are you going to crowd it with ropes going everywhere?

Hard to give any crits yet. Will try later on.

rolhionjs

08-09-2002, 11:20 AM

hehe ;) it looks like to some stuffs of leonardo yes ;)
But just wanted to make a boat, with a 19th century balloon, or even sooner.

I hope to put alot of details like ropes, anks, etc. And then will come my two guys in it... alot of work for the futur days. :)

08-09-2002, 11:30 PM

WAAH!!:eek: Your skills in rendering and image filtering ARE AMAZING!!The vehicle is very good too!More than the first!:buttrock: WROX!

STELLAIRE

08-10-2002, 02:19 AM

oula je vois que chaqune de tes apparitions sur CGtalk donne l'occassion d'un bon moment de lecture .. ;)

Bon encore une fois ca dechire completement , je sait meme pas comment t'arrive a imaginer ce genre de trucs .. et rien que pour la premiere etape ou tu dit mettre 5 min moi y me faudrait 3 jours ..

bon autrement comme d'hab .. you're the best ! :thumbsup:

STELLAIRE

08-10-2002, 02:25 AM

rhaaaa mais c'est pas vrai que t'a eu le temps d'en faire 2 !!!! t'es monstrueux !!! ;)

rolhionjs

08-10-2002, 12:32 PM

http://www.designpicture.com/images3Dversion/challenge6_2_201.jpg

08-10-2002, 01:10 PM

:buttrock: STIIL AN AMAZING WORK!:buttrock:

MikaelPersson

08-10-2002, 01:12 PM

evolving nicely. Have you thought about adding really large sails. Could make a nice addition.

rolhionjs

08-10-2002, 02:42 PM

Well thx Oz ;) i love your concept alot too :)

Mikael P. : Yes i thought about it, but except on each sides, i don't know exactly where to put these large sails... :(

Stellaire : bon alors tu t'y mets à ce challenge ???!!!!!! ;)

So now, let's introduce you the future captain of this ship, i named : Captain Corsum, 1st of the name.

One of his descendant is deep in the wip galery somewhere....

here's the start of modeling :

http://www.designpicture.com/images3Dversion/captain01.jpg

Joril

08-10-2002, 02:55 PM

Fantastic stuff Strike.
Style in abundance.
I do think you'll need to attach the balloon better to the ship. I like the ropes idea though :D
The pirate is looking cool too, the proportions are a little of for a human, more like a dwarf, but still very cool that way.
Flying ships rule, so check out mine :D:thumbsup:

Ragnakim

08-10-2002, 03:21 PM

Damn!!! Your a MACHINE!!! Your doing two contraptions e one go!!! :eek: Drop the cafeine!!!! :D Love your modeling!! I cant crit about the flood of details because I love a model with lots of detail. :rolleyes: heheheh Keep up the great job!! :thumbsup:

08-10-2002, 03:24 PM

U MADE IT AGAIN!!! fantastik stuff!how can u be so QX!?:surprised

rolhionjs

08-10-2002, 03:58 PM

well thx guys ! :)

For the proportions, i reduced the head to give a more human view.

OZ : cafeine my ally is :) :)

http://www.designpicture.com/images3Dversion/captain02.jpg

chuckmoser

08-10-2002, 04:50 PM

Nice job on the modeling. I noticed someone had suggested huge sails on the ship. My thought is how about huge merchant ship sails on mastheads, like a ship from the 1700's? You could have a few layers of these sails, and still keep the form of the blimp.
Just my two cents.

Great work!

rolhionjs

08-10-2002, 05:40 PM

http://www.designpicture.com/images3Dversion/captain03.jpg

AshodT

08-10-2002, 06:17 PM

beaucoup de caractere le pirate!!

great work mate!!:buttrock: :buttrock: :thumbsup:

MikaelPersson

08-10-2002, 07:18 PM

Yes, my first thought too was make the huge ones on the sides. But what if you were to replace the back one. And make a large sail stretching from the boat up to the balloon.

Lorenzo

08-10-2002, 07:31 PM

bon, je crois que je vais aller me coucher, comme on dit, lolll
very nice stuff, especialy the pirate.:bounce:
very cool stuff

rolhionjs

08-10-2002, 08:19 PM

well thanks :)

Mikael P. : i'm gonna try that :) thx for the help

another render :

http://www.designpicture.com/images3Dversion/captain04.jpg

Koma

08-10-2002, 08:33 PM

you have a nice style ,this is beautifull ,the girl on front of the boat look really nice ,tout est beau aller continu strike .

mais j ai une petite question ,est ce que ta changer d idée ou tu vas jumeler les 2 machine volante ?

freemind77

08-10-2002, 08:44 PM

WOW that's my favorite ! Like that old-aged style, what about add some anchor ?

DXtreme

08-10-2002, 08:59 PM

checked the whole thread to get through the developing process...and...it's real cool!
i like this pirate.....really nice modelling (just inspirating...thx for this).....
keep it up!

Dnepr

08-10-2002, 09:53 PM

et les canons Maitre S² où sont ils ? :thumbsup:
where are guns Master S² , I do not see them (sorry for my poor english language) ;)

ilasolomon

08-10-2002, 10:05 PM

excelent, as always, you rock .::STRIKE::. :) i like your
style very much. keep doing great stuff like this (& that, & that...!)

rolhionjs

08-10-2002, 10:15 PM

thanks for all your comments guys ! happy you like it.
About the anchors : ithought of it, and there's alot of details to add ;)

dnepr : ben mon salaupard !! t'en auras mis du temps pour poster !! lol merci gars :) ;)

Pas prévu de canons pour le moment :(

Gabe : i think i'll still keep the 1st model for a final scene ;) we'll see in time :)

Ninja Scroll

08-10-2002, 10:41 PM

Oh, my God.... are you human...?????

:applause: :applause: :applause: :applause: :applause:

Matt-Clark

08-10-2002, 11:19 PM

That pirate looks familiar... can't quite put my finger on it... hmmm ;)

rolhionjs

08-10-2002, 11:26 PM

;) surely coz of my inspiration on your works ;) I really like your work Matt ! :) and i'm learning how to modelise, to obtain the quality of your mesh... but i'm far from it ! Anyway, i hope you are not disapointed about this model.

Joril

08-10-2002, 11:46 PM

Originally posted by Matt Clark
That pirate looks familiar... can't quite put my finger on it... hmmm ;)

He looks like William Dafoe.
Maybe that's it.

[Edit]:
*goes to matt's site*
*slaps forehead*
Of course ...

08-10-2002, 11:54 PM

:eek: AMAZING !! U ARE AMAZING! :eek:

STELLAIRE

08-11-2002, 03:36 AM

bon semblerais qu'a Rome faut vraiment faire comme les Romains , donc je vais me galèrer 5 min pour traduire ..
Ben mon bon Strike .. hummmm tu me semble etre dans le trio de tête cette fois ( pas sur d'avoir tout vu )
En tout cas le boulot est magnifique .. mais merde COMMENT TU FAIT ??? c'est pas possible de modeler aussi vite !!!! surtout pour du bon resultats comme ca ..
t'es le meilleur !:thumbsup: :thumbsup:

So my dear Stryke.. I think you are in the 3 bests this time .
Rally your work is wonderful.. but HOW CAN YOU DO THAT ??? it's not possible to work so fast !!!! especially if it's to make a so good work...
You're the best !:thumbsup: :thumbsup:

STELLAIRE

08-11-2002, 03:38 AM

Maybe french touch ? ;) :rolleyes:

erilaz

08-11-2002, 12:41 PM

Exceptional work Strike. That woman figure head reminds me a bit of that lady in Silent Hill 2... can't remember her name!:D
Hey, can you ramp up the polys in the rings at the front of the ship? A bit edgey there.

Again, really amazing work.

Montparnasse

08-11-2002, 12:43 PM

I think that it's exactly the girl at the front of the ship, that want not to suit well enough into that scene...it disturbs me much...

Wouldn't it be better to exchange that girl with a fantasy-figure, but - and that point I find really important - with a dangerous or strange look...

Because the pirate on that air-ship looks so angry, real bad and then that lovely, very fine girl from another World....no...

But these are just my two cents...

Greetings from Switzerland
Montparnasse :lightbulb

Ragnakim

08-11-2002, 12:56 PM

damn!!!! :eek: Your fast!!! heheheh I'm loving it!!! :thumbsup:

rolhionjs

08-11-2002, 01:16 PM

erilaz : yes i'm gonna do that ;) thanks but not over yet

Montparnasse : well maybe you're right about the figure. But in alot of ship, we find this kinda figure : a woman in front of boats. Maybe to not forget the sailors women, or something... Anyway i choose a woman to contrast with the tough guy the captain is. Maybe this is just for him a way to find some peace after fighting. Maybe just coz he likes women ? ;)

anyway, thx for the comments.

i started the slave rower, coz this ship need to go on, when there's no wind :) :

http://www.designpicture.com/images3Dversion/captain06.jpg

Klasz

08-11-2002, 01:45 PM

' TIN Mais c'est pas POSSIBLEEE !!!!! tu modélise en quoi bordel pour etre aussi rapide !!!! ça me toue le truc !! Donne nous une piste au moins (même petite) !

BRAVISSIMMO

ps : N'oublie qd même pas que les persos sont vraiment secondaires dans cecontest qd même... :)

rolhionjs

08-11-2002, 03:50 PM

:) une petite piste pour la modélisation ? alors voilà :

http://www.designpicture.com/images3Dversion/captainwire.jpg

En fait je pars d'un cube, que je subdivise une fois, et à partir de ça, j'utilise smoothshift pour la continuité du corps en sélectionnant mes polygones (pour les bras, le torse, etc...) jusqu'à obtenir une forme simple, que je subdivise à nouveau, pour travailler en subpatchs et en étirant mes points et polys avec drag et dragnet, ainsi que move, rotate, etc...

Ok, here is the rower of the ship : let me introduce you Captain Corsum and his best sailor : Brasor.

http://www.designpicture.com/images3Dversion/captain07.jpg

Baal

08-11-2002, 04:31 PM

Le pirate est superbe :applause:

Pour l'autre, si les pantalons sont censés être fait en tissu, je me demande bien comment ils tiennent dans cette position! Peut-être les faire un peu plus 'tombants' et rajouter quelques plis, histoire qu'ils soient plus crédibles. Les plis du coude et de l'épaule sont étranges... par contre, j'adore le visage, il à un look de tueur, le genre qu'on fait pas ch***!

Excellent travail, j'ai bien hate d'en voir plus! :xtreme:

prayas

08-11-2002, 06:37 PM

this thread is great. The details are just getting cooler on the way.

Thanks for this little insideview on the characters. Need to do 2 characters by myself for my airplane. Think this will help. They will also be pirates but more post apocalytic ones.

P..:

WiltedEnds

08-11-2002, 06:42 PM

damn it this kicks so much ass....good work...i like the characters a lot

MikaelPersson

08-11-2002, 06:45 PM

You need to do something about that slave´s shoulder. They are to high up. Should be pushed down and in slightly.

Otherwise, great work. I am impressed by the speed of yours.

TES

08-11-2002, 07:33 PM

gr8!!!

STELLAIRE

08-11-2002, 08:00 PM

hummm bon ca me degoute qu'on puisse modeler a cette vitesse..
bon heuuu ben moi je suis pas fan des persos , je comprend que tu te soit pas eternisé desssus vu qu'ils sont secondaires dans ce challenge ... mais vraiment l'esclave me semble loin de ce que tu aurais pu nous faire en t'appliquant .. y'a vraiment des problemes avec le tissus en general et avec la posture de l'esclave...
Le visages sonts vraiments super par contre ! :) :thumbsup:

Elf

08-11-2002, 08:50 PM

i dont know if anyone has already said this or if it was supposed to be like this because i just got my comp back from being fixed and didnt read everything, well anyways:rolleyes: the legs on the pirate look sort of strange, and so do the arms on the man without the shirt, anyways it looks really good:thumbsup:

amish_boy

08-11-2002, 11:58 PM

very nice !!:applause:

STELLAIRE

08-12-2002, 12:45 AM

You think Strike is fast ?
yes he make 2 differents participations for this contest...
yes he make 2 characters for the second parcipation...

But that's not all ..

this crazy boy make an update of his website and a new logo too ..

he's not a man, he's a machine !!!

STRIKE : General of the Caffeine Army

:p ;) :p ;)

rolhionjs

08-12-2002, 11:30 AM

Well, to answer about the "not much detailed" thing on my two guys, i just don't want to work alot on it coz after all, these characters are not the main thing in the challenge. So it was just for fun to modelise them, but i will not add more details for now. They're just here to be in the final ship, and to wear the inside of it. So maybe later i'll take them again to do something more detailed, but not for the challenge.

maaS

08-12-2002, 11:40 AM

impressionnant c cler :)

non selement le gars strike est rapide mais en plus il dechire (strike, you dechire !!! :) ) !

a vrai dire les mots me manke tant ton taf me babafie :)

vraimment terrible :)

rolhionjs

08-12-2002, 11:47 AM

hihi !! :) :) maaSète t'es là??!!! maaSter :buttrock: ça oink mon bon ?

angel2k

08-12-2002, 11:48 AM

J'ai essayé lightwave ce week end :) Faut faire un code secret pour avoir un logiciel normal ?? C'est spécial comme fonctionnement.. j'arrive aps déselectionner des trucs !

maaS

08-12-2002, 11:55 AM

strike > hi hi hi :) ça oink mon lapin :) a doooonf :) ^^ :bounce: et toi ? a roule ? :)

angel> en fait, lightwave est un animal special, fo l'envouter parait... strike m'a confier sur l'oreiller qu'il a du porter un string rose, se tartiner 3 pot et demi de nutella sur le corps et tourner autour de la becane en hurlant des phrases pas vraimment catho ^^

angel2k

08-12-2002, 11:57 AM

Ca va mon bon maaS ?

Arf :( j'ai plus que 2 pots chez moi :( Max ça lui suffit... Lightwave va devoir attendre que je fasse les courses alors.

rolhionjs

08-12-2002, 11:58 AM

maaS : LOL Mdr.... Arf va plutôt jeter un oeil sur NK dans le même post que ce challenge, je t'ai posé une question là-bas ;) :) :)

Angel2k : pose tes questions sur le forum Designpicture ou Lightwave.online, ce sera plus simple qu'ici pour répondre :) ;)

maaS

08-12-2002, 12:01 PM

strike > mdr :) en fait si tu la modelise pas tro grosse, c negociable :) bon apres fo voir si tu cours plus vite qu'une bonne vielle volée de gro sel ^^

angel >vi et toua mon ch'ti pingouin au ch'veux bleue ? va bien ? :) bon 2 pots je penses que tu peux negocier avec le logiciel ^^apres tout a force de persuasion, hu :) :)

angel2k

08-12-2002, 12:10 PM

Vais bien :)

Je vais lui offrir un cadeau à mon lightwave pour qu'il soit content.. des bonbons ca marche ;)

:beer: mon bon :)

STELLAIRE

08-12-2002, 06:06 PM

loooooooooooool mdr mdr :p :p
angel2k faits gaffe paske apparement meme uand on a bien reussi l'envoutement ca perd son effet si on y revient pas regulièrement et faut tout recomencer... bon il est ou mon string rose ?? :p :rolleyes: ;)

freemind77

08-12-2002, 06:30 PM

This surely belongs to the top ten of this challenge , thumbs up !:thumbsup:

curseways

08-12-2002, 08:13 PM

'lut :)
Rien à dire du boulot de pro.

rolhionjs

08-12-2002, 09:41 PM

well thx all :)

Just a view of the 2 guys in the ship. Next steps : adding details, details and again details... ;)

http://www.designpicture.com/images3Dversion/captain08.jpg

08-12-2002, 09:53 PM

WOW! U entry is going to be better and better every time!GO! GO! GO! GO! GO! GO!GO!:bounce:

dmcgrath

08-12-2002, 10:33 PM

Going great!

Just more fanmail

KRUChY

08-12-2002, 11:37 PM

Great job, really IM ALL FOR IT :bounce:
but im just thinking and watching that pirate. for me there is something not right. I cant tell you now or he has too long body or legs or arms, or just his head isn't big enought? Maybe legs and arms are too big, too long to the rest of body and for me there is something not right about this guy. :hmm:
But the rest fabuloso compadre. AWSOOOOOM :buttrock:
keep it cool :bounce:

rolhionjs

08-14-2002, 02:04 PM

adding some tiny details, and two wings on each sides :

http://www.designpicture.com/images3Dversion/captain09.jpg

more to come...

Roach[MXF]

08-14-2002, 03:56 PM

I must say I know you have talent. Your last two challenges were nice, but this one is sweet. I must say you are one of the better artists here. -Jeremy- Sweet

rolhionjs

08-14-2002, 04:51 PM

thx Roach ;)

Well let's see another view :

http://www.designpicture.com/images3Dversion/captain10.jpg

and a new thing not finished yet :

http://www.designpicture.com/images3Dversion/captain12.jpg

Rhid1en

08-14-2002, 05:07 PM

It's looking really amazing! Sure hope I can get going as quick and actually make something for this contest!
Since there's know one in the back working the rutter though, shouldn't the captain have some sort of wheel/stearing device? I also think you should have a lot more ropes and braces conecting the top sails to the boat, right now it looks like it would break pretty easy.

rolhionjs

08-14-2002, 06:25 PM

http://www.designpicture.com/images3Dversion/captain13.jpg

Clanger

08-14-2002, 06:33 PM

Stunning, the best viewpoint yet.

3D Freak

08-16-2002, 01:03 PM

Great Job Strike!!! You have a really unique style that really sets you apart from other artists here- keep up the great work :buttrock:

rolhionjs

08-16-2002, 02:53 PM

wow... what happened ? i think that some posts have gone away... :shrug:

so here are the latests shot for this flying lifeboat.

http://www.designpicture.com/images3Dversion/captain14.jpg

http://www.designpicture.com/images3Dversion/captain15.jpg

http://www.designpicture.com/images3Dversion/captain16.jpg

some other to come, and to finish, i'll add a new machine ;)

Poju

08-16-2002, 03:29 PM

Great work!!!:buttrock:

I think that slave rower should face to back of ship, it's more powerful to row

rolhionjs

08-16-2002, 04:27 PM

http://www.designpicture.com/images3Dversion/captain17.jpg

paconavarro

08-16-2002, 05:07 PM

:eek: :eek: :eek:

Awesome

rolhionjs

08-16-2002, 11:43 PM

well starting a new character, with his own personal homemade flying machine.

http://www.designpicture.com/images3Dversion/fly002.jpg

rolhionjs

08-17-2002, 12:54 AM

http://www.designpicture.com/images3Dversion/fly003.jpg

rolhionjs

08-17-2002, 01:53 AM

http://www.designpicture.com/images3Dversion/fly004.jpg

eirenicon

08-17-2002, 02:04 AM

Uhm... you know, the woman on the prow of that boat looks a lot like a Poser model. Mostly the hair. Otherwise, spectacular modeling, your attention to detail is superb. :thumbsup:

rolhionjs

08-17-2002, 01:07 PM

Uhm.... well... I don't like to justify about my job, and most of all about using an easy software to help about... about what exactly ?

I never used poser, except one time to try it, and to know what kinda of soft it was. I finally thought that creating his own character has more much fun than used an "already done" character, and most of all for a challenge... Maybe some people do it, but that's not my case. So here is the model i did to put on the boat, the woman :

http://www.designpicture.com/images3Dversion/cheveux2.jpg

and here the way i've done to modelise the hairs :

http://www.designpicture.com/images3Dversion/cheveux1.jpg

So do you think my pirate, or slave, or even the last i'm creating is poser too ?

STELLAIRE

08-17-2002, 06:09 PM

susceptible maitre S² ;)
exellent travail de toute facon .. mais c'est pas vrai que tu nous en commence un Troisieme ?!?!?
Tu fait autre chose que LW dans la vie ? ;) ;)

eirenicon

08-17-2002, 06:42 PM

I've tried Poser as well, and I agree that creating your own characters is far more rewarding. Like I said, you have some amazing skills when it comes to modeling. It's just that the hair on the woman looked to me like one of the hair models that comes with Poser (I have a memory for little things like that). It'd be no big deal if you were using it as a placeholder until you got around to modeling it, as you obviously have the capability to model quality work, but it's apparent now that it is indeed your own work.

No offense intended, I just make it a point to call on things like this in case people are using work that isn't their own. All in all, I respect your work and I think that your pirate ship is definitely in the top 5 entries in this challenge. Keep up the great work.
Cheers! :beer:

rolhionjs

08-17-2002, 08:23 PM

STELLAIRE : Susceptible ? dès fois ;) mais là je tenais simplement à clarifier le fait que c'est bien moi qui modélise...
Autre chose que LW ? euh... mon site ? vi j'ai mis à jour ça aussi ! et puis ma femme aussi, sinon elle va vite monter en pression ;)

thimthyD : :beer: Cheers !

http://www.designpicture.com/images3Dversion/fly005.jpg

misterboogie

08-18-2002, 04:08 AM

Strike, you are a modeling maniac!

Great piece. My fav so far.

freemind77

08-18-2002, 07:12 AM

STRIKE this is excellent , but dont overdo it , i think there would be too much things , so it may looks pretty like one pile of junk....other than that , excellent work :thumbsup:

Lorenzo

08-18-2002, 02:11 PM

j'aime vraiment ton style, est ce que tu fais du box modeling, ou bien des patch ou des spline, en tout cas ca arrache!:applause: :eek:
peut être je changerais une seul chose, les sacs de sable, pour le lest ils paraissent plutôt des cruches, leur donner une forme de sac serait super, (mais ce n'est qu'une idée)

rolhionjs

08-19-2002, 05:53 AM

Ok... Well i received some mails and here is a comment about the fact i used Poser for the woman in front of the ship... I tried to justify the fact i really modeled this woman by sending pic of it in wireframe, but no way...

So,... sorry to shock you all, but if nobody trust me, then i prefer to stop my challenge here, and then i think people will not treat me like a liar or this kind...

It's just too bad coz this challenge was great, and it wasn't over for myself... but sometimes, maybe it's better to do that for the peace of others...

Sur ce.... bien le bonjour chez vous, bande de braves gens........

dmcgrath

08-19-2002, 06:14 AM

I would not take it too personally. You did all you could by showing the wireframe of your model. If that isn't good enough for them. That is not your problem. I say keep working, you are a competent modeler. You have already proved yourself on other challenges here. Its one reason why everyone is looking at your models so carefully, they. As for the hair on your female model, perhaps some people dont realize that she is part of the boat, not a living person.

Good work, friend.

-dan

KRUChY

08-19-2002, 10:14 AM

I was away for few days and just watched your work.
MAN DO YOU WANT TO KILL ME !!! :p
that ne chracter.... WOOOOW :love:
it's Fantastic !!!! :bounce:
GIVE ME MORE => your work is like a drug for me, i love to watch it.

:wavey:

iC4

08-19-2002, 11:00 AM

don't stop because some people are complaining. if they say you are using a poser model I would take it as a compliment!!

curseways

08-19-2002, 11:07 AM

I'm agree : DON'T STOP !!! You're one of the best modeler among us so go for it and "Kill 'em all !!" :) :scream:
Lightwave Powa :thumbsup:

08-19-2002, 12:00 PM

:eek: c'est quoi cette post de blazé Strike??? nous on veut voir ce que tu fais on s'en fout des cons!!

Klasz

08-19-2002, 12:09 PM

T'as perdu la tête ou quoi ?!! On la connait tous la vérité.....c'est pas parce qu'un minable gars frustré de pas pouvoir faire comme toi délire totalement qu'il faut arreter !!
de temps en temps, c'est vrai, quand on me fait un reproche, je doute...... mais là aucun doute à avoir man....
TOUT LE MONDE sait que l'aut gars y délire ! ;o)
arrete pas s'il te plait ... déjà le mois dernier t'étais trop bien parti et j'étais dégouté que t'arretes !! là tu déchires littéralement alors laisse pas béton stp....fais nous une scène de Batard !!! Du grand Art !!

Rhid1en

08-19-2002, 07:08 PM

Don't stop, your work is amazing! If anyone is stupid enough to seriously look at all the models you've created for just this contest alone and think that you'd use a poser model, unless they're a moderator, let them fester in their own bitterness of denial and ignorance. It's one thing to question, to make sure things are kept legal in these contests, but you threw up your model showing people, now keep moving on, unless one of the moderators asks you more questions. I think all the models you've produced, especially with the wire model you posted is enough proof you wouldn't be using a poser model. hehe

Ninja Scroll

08-19-2002, 07:36 PM

Sorry Strike, but we don't allow you stop... :shame:
I agree 100% with curseways, you're one of the best modeler among us, and your work is really inspiring. You don't need to prove anything to anyone. Just keep your amazing work.:thumbsup:

Virtuoso

08-19-2002, 07:40 PM

Strike..................There will always be some kind of negativity from somewhere with whatever you do. You know what is and what is not, that's what is important. You do not have to explain your self. For God's sake even if it is a Poser model ( And I know it's not) who cares, it adds ambiance and a good look to your overall work, that's what really counts in the end. You have been putting up very nice work here for some time now, including this challenge. It would be a shame to quit now. You should just keep going and finish, it is quite an intricate piece of art thus far, and should get finished to show it off properly and give it it's just reward.

Just remember, there are always a few in the crowd that should be ignored, in this case as well, just finish and give your work the respect it deserves................I for one want a finished creation, so get to it................:beer: :)

rolhionjs

08-19-2002, 08:31 PM

Well... Thanks for all your positive comments guys :beer:

I just get angry coz of it, but i didn't realize how the things i'm doing are so important for others... So that took me to this thought : maybe i should continue in this challenge ! :drool:
and not only for myself, and the pleasure i have to model, but for you all who like my work. And if this vision can give you just a part of inspiration, then i'm a happy man :) :)

Just a little animation... too bad......

Needs codec divx5 to play : CLICK (http://www.designpicture.com/images3Dversion/cgvid.avi)

STELLAIRE

08-20-2002, 02:09 AM

loooooooooool s'pece de petit malin va ... mossieur joue les blasés facon "ouais je m'en vais" pour etre couvert de comments élogieux.. c'est futé faudra que je pense a la ressortir sur NK celle la ;) ;)

quand a l'update du site alors la chapeau ! :thumbsup:
heuuu j'suis pas trop fan du dernier perso ... je sait pas pourquoi ...

Virtuoso

08-20-2002, 02:21 AM

That's the way to do it Strike.............Looking forward to more of your creations.............Very nice news, just go for it................I'll be back for some more fun later.............:thumbsup: :beer: :)

rolhionjs

08-24-2002, 04:39 PM

Well, i'm back after some other works :)

Sot here's the idea :

http://www.designpicture.com/images3Dversion/fly007.jpg

rolhionjs

08-24-2002, 04:54 PM

http://www.designpicture.com/images3Dversion/fly008.jpg

Joril

08-24-2002, 05:36 PM

Hey Strike, is this a finished piece?
Because I think it's not as original as the other one. Are you gonna add this delta to the pirate bunch?
And I do think the delta flyer itself is far to small. I think a funtional delta should be 5 times as big to fly - not chras.
I wonder where you'll take it. :hmm:
Keep it up!

rolhionjs

08-24-2002, 08:01 PM

Joril : no of course :) In fact, i just did that quickly to show you the main idea, but there's still alot of details to add.

08-24-2002, 08:19 PM

haaaa....strike,strike....ur work is so amazing......:thumbsup:

rolhionjs

08-24-2002, 10:46 PM

Well... thx Oz, but i'm not sure of it...

Due to personal problems, i stop here... Sorry for the inconvenience... Thx for all for the support, and especially : Niko, Angel2k, Dnepr, and all the others i forgot.

see you one day...

bye all

http://www.designpicture.com/images3Dversion/fly009.jpg

Joril

08-24-2002, 11:14 PM

It's a sore to see you drop out. Up to now yours was the most propelling entry of the challenge.
But I'm pretty sure you'll be back with avengance ;)
I hope you pirate ship is still gonna be amongst the final entries.
I also hope your problems dissolve shortly.

Best of luck to you Strike!