PDA

View Full Version : Whats a calibration area?


Jb5k1
05-16-2004, 04:49 PM
I had some burning problems and i had a power calibration error. that was with alcohol 120%, and i then tried the same project with nero and it gave me a "calibration area full" error

i used a new disk and didn't have any problems, so was that a problem with the disk or something?

thx :bounce:

Ice Czar
05-17-2004, 01:42 AM
http://club.cdfreaks.com/search.php?searchid=11970

unfortunately most of the returns are Dutch :p
but WorldLingo is your friend ;)

if a media changes fixes it....

also of interest
CDRW Media Tests (http://club.cdfreaks.com/forumdisplay.php?f=77)

next time the make and model of the burner involved would be a good idea

Jb5k1
05-17-2004, 01:46 AM
its an nec 9300a or something

everythings all good now, i guess it was just a disk error or something
thx

loop29
05-17-2004, 04:53 PM
The only thing that comes to my mind when speaking of a CD-drive is the calibration of the laser that reads and writes the grooves into the CD. My guess is that the Laser needs to calibrate the optimal position for reading and writing for every disk, since a laser has a optimal focus position. That is caused by the magnetic actuator, which has no absolute measure of position, so it has to calibrate itself to the proper focus.

regards

CGTalk Moderation
01-18-2006, 05:00 AM
This thread has been automatically closed as it remained inactive for 12 months. If you wish to continue the discussion, please create a new thread in the appropriate forum.